@anomeome
I backported all DSA commits from 5.9 to 5.4 during my testing, it wasn't fixed.
I did see something related in 5.10 or maybe 5.11 that might've fixed this, but I never saved the link.
GPG signatures are now available in all sha256sums files.
Fingerprint: 6395 FC99 11ED CD61 5871 2DF7 BADF CABD DBF5 B694
Key (2020 #1):
-----BEGIN PGP PUBLIC KEY BLOCK-----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=qpX+
-----END PGP PUBLIC KEY BLOCK-----
Hi I have flashed this firmware and it boots on my WRT32X nicely.
How did you overcome the Kernel size issue? As this is the main reason it's not in snapshots for official right now.
Also was wondering if I had permission to use and modify you config too, also what's the work directory about??
it boots on my WRT32X nicely.
Awesome!
overcome the Kernel size issue?
I disabled many debug options and bluetooth/usb support.
permission to use and modify you config to
You are free to use the configs however you like in the spirit of open source.
If you need a defined license consider it GPL-2.0.
also what's the work directory
Work is just where I store changes as they are raw, not in .patch form.
Thank you for your quick reply.
Will make a pve VM later and get back to recompiling firmware.
Might add USB and BT back in unless you think that would cause the kernel size issue.
If you mean kernel 5.10 | 5.11, there is a mvebu 5.10 patch-set available now, but my understanding of the issue is that it is not considered a bug, but a design limitation. So to my point above, it is something that is going to have to be addressed by other means.
On the mamba and venom kernel partition size being exceeded, this is currently really a bot 5.4 build issue, unless you really load up the builtin kmods. But I have hit the issue with my build on 5.10; see post
@anomeome
My mamba kernel is at 2496250 bytes without CONFIG_KERNEL_CC_OPTIMIZE_FOR_PERFORMANCE.
I see no reason 5.4 to 5.10 would increase past the 3MB limit with my config.
And 5.4 has support until nearly 2026 if anything.
Well, i have managed to get my PVE LXC setup done and debian installed @SkewedZeppelin are you able to PM me, i have questions about how you build yours so i can follow it the best i can.
I need to add stuff to the image or at least host my own files so i can use things such as sqm etc due to kernel issues between your build and openwrt's build.
I think 60GB SSD and 4GB Ram should be enough on my little PVE Box.
My build VM is Fedora 33 with 16GB storage (btrfs compressed) and 6GB RAM.
Step by step:
# Install the dependencies listed at https://openwrt.org/docs/guide-developer/build-system/install-buildsystem
git clone https://git.openwrt.org/openwrt/openwrt.git
cd openwrt
git config pull.rebase true #makes updating easier
./scripts/feeds update -a
./scripts/feeds install -a
#copy in my config
#git am/apply my patches
make nconfig #make your changes
make download -j4
make -j16
1 Like
Thanks for that and your reply will let you know how it goes.
Edit: Right on make download section now, so i should be able to get it compiled pretty quickly. I have enabled USB and Bluetooth but as kmods so hopefully i can stand clear from the kernel issue.
Edit: Compiled without Issues haven't tested USB or Bluetooth yet aka checked Bluetooth in log and or plug in a USB Storage Device, however it booted and works well thus far, so thank you! Just got to make a slight adjustment to the config as i forgot 1 addon i needed for DDNS.
Edit 2: Checked logs and USB 2/3 shows to be working as well as the bluetooth.
This my first time i have seen that command, so how to you update after the initial pull?
as i tried just git pull and it wouldn't update at all.
That config command just ensures any commits you make are rebased instead of merged.
Makes maintaining your local fork easier.
Steps to update everytime:
git pull
./scripts/feeds update -a
./scripts/feeds install -a
make nconfig #save and exit
make download -j4
make -j16
I flashed this build and booted it on my WRT32X. I could not get internet access across the LAN ports and flashed back to stock.
Is there a preconfigured build that acts like a router after flash without configuration required?
Currently flashed back to stock firmware
@SkewedZeppelin would like to thank you for your help, now have builds working lovely.
Currently running:
OpenWrt SNAPSHOT r15241+5-3ab695368a
Kernel Version 5.4.83
With CPU Frequency scaling enabled and working very well.
Update:
Firmware Version OpenWrt SNAPSHOT r15371+5-7e4585e593 / LuCI Master git-20.348.36293-4843841
Kernel Version 5.4.85
On WRT32X with CPU Frequency working very well using the following settings
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo 933000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
echo 933000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo 30 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
1 Like
There is now an XMPP chatroom for anyone interested.
Not a guarantee of support, but I'll do my best to answer questions there.
divested-wrt@conference.konvers.me
2 Likes
hi,
I have the 32x router, is it possible to use that build?
thanks
Which build, if your talking about OP's build then yes there is a WRT32X firmware image on there.
I see, I thought you were the same 
Ive read too fast.. sorry.
if I understand, you too have a build for 32x,?
Yes I have a private build myself, currently compiling r15404 right now for testing. However OP's build is very good your only missing on a CPU Schedule patch and nothing else.
2 Likes
Same here, WAN did get a public IP address (IPV6 included) but LAN couldn't connect to the internet. Looked like LAN hosts didn't get IP via DHCP and DNS wasn't working
Sure I'm missing a step, just don't know which...