Hello! After installing OpenWrt onto my ER-X, when I browse real time graphs and select traffic I am not seeing the data I am used to. Previously with OpenWrt on another device I would see data flow between the WAN eth and br-lan.99 (I use two VLANS). Now I only see this type of data on the DSA tab and it shows roughly the same for both in and outbound.
Particularly I can test this when performing a speedtest. Whereas br-lan, br-lan.20, br-lan.99, eth0, eth1 show very minimal amounts of data, like kibits but DSA will show mbits/gbits pretty close to equal on both sides... I am using hardware offloading if that makes a difference.