Netgear R8000 - OpenWrt 21.02.0 0 - no WIFI for 5ghz and 2.4ghz bands

Hi Guys,
I just loaded my Netgear R800 with the latest OpenWRT code 21.02, but the wireless is not coming up.

Here is the code for my dmesg:

 dmesg
[    2.827071] libphy: Fixed MDIO Bus: probed
[    2.831318] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    2.837415] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0x00 and package 0x00
[    2.846398] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[    2.857006] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    2.857017] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
[    2.867789] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    2.867799] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
[    2.877830] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    2.888286] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    2.898743] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    2.909195] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[    2.919577] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[    2.930152] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[    2.940734] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[    2.951334] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    2.951344] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[    2.963420] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
[    2.973846] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
[    2.984268] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    2.984278] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[    2.994527] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    2.994536] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[    3.004601] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    3.004610] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[    3.015989] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    3.015998] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[    3.028767] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    3.028776] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
[    3.038869] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[    3.050519] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[    3.050528] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[    3.061994] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[    3.069959] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 11 provided by platform.
[    3.070209] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
[    3.075869] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
[    3.082418] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
[    3.088712] bgmac_bcma bcma0:3: Using random MAC: 5a:db:26:c9:64:80
[    3.096831] b53_common: found switch: BCM53012, rev 5
[    3.102594] bgmac_bcma bcma0:4: Found PHY addr: 30 (NOREGS)
[    3.108228] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
[    3.114924] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[    3.121212] bgmac_bcma bcma0:4: Using random MAC: b2:d8:f0:a9:ad:33
[    3.128773] bgmac_bcma bcma0:5: Found PHY addr: 30 (NOREGS)
[    3.134400] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
[    3.142102] bgmac_bcma bcma0:6: Unsupported core_unit 3
[    3.147429] bgmac_bcma: probe of bcma0:6 failed with error -524
[    3.272827] pcie_iproc_bcma bcma0:7: link: UP
[    3.277294] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[    3.283601] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
[    3.290493] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    3.298460] pci 0000:00:00.0: [14e4:8012] type 01 class 0x060400
[    3.304501] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    3.314183] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    3.323878] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[    3.333644] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
[    3.343418] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    3.353211] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    3.359325] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
[    3.369981] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    3.379775] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[    3.389457] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
[    3.399138] PCI: bus0: Fast back to back transfers disabled
[    3.404729] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.412750] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
[    3.422643] pci 0000:01:00.0: [14e4:aa52] type 00 class 0x028000
[    3.428719] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    3.435543] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    3.442463] pci 0000:01:00.0: supports D1 D2
[    3.447608] PCI: bus1: Fast back to back transfers disabled
[    3.453214] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    3.459851] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    3.466500] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x085fffff]
[    3.473318] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x083fffff 64bit]
[    3.480661] pci 0000:01:00.0: BAR 0: assigned [mem 0x08400000-0x08407fff 64bit]
[    3.488001] pci 0000:00:00.0: PCI bridge to [bus 01]
[    3.492979] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x085fffff]
[    3.622827] pcie_iproc_bcma bcma0:8: link: UP
[    3.627293] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[    3.633596] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
[    3.640488] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[    3.648456] pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
[    3.654539] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    3.661497] PCI: bus0: Fast back to back transfers disabled
[    3.667108] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.675285] pci 0001:01:00.0: [10b5:8603] type 01 class 0x060400
[    3.681352] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff]
[    3.687782] pci 0001:01:00.0: supports D1 D2
[    3.692058] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.699540] PCI: bus1: Fast back to back transfers disabled
[    3.705140] pci 0001:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.713335] pci 0001:02:00.0: [0000:0012] type 12 class 0x001200
[    3.719370] pci 0001:02:00.0: unknown header type 12, ignoring device
[    3.725913] pci 0001:02:01.0: [10b5:8603] type 01 class 0x060400
[    3.732096] pci 0001:02:01.0: supports D1 D2
[    3.736383] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.743218] pci 0001:02:02.0: [10b5:8603] type 01 class 0x060400
[    3.749407] pci 0001:02:02.0: supports D1 D2
[    3.753694] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.760544] pci 0001:02:03.0: [0008:0000] type 00 class 0x000000
[    3.766839] pci 0001:02:04.0: [0008:0000] type 00 class 0x000000
[    3.773123] pci 0001:02:05.0: [0008:0000] type 00 class 0x000000
[    3.779401] pci 0001:02:06.0: [0008:0000] type 00 class 0x000000
[    3.785701] pci 0001:02:07.0: [0008:0000] type 00 class 0x000000
[    3.791982] pci 0001:02:08.0: [0008:0000] type 00 class 0x000000
[    3.798278] pci 0001:02:09.0: [0008:0000] type 00 class 0x000000
[    3.804581] pci 0001:02:0a.0: [0008:0000] type 00 class 0x000000
[    3.810868] pci 0001:02:0b.0: [0008:0000] type 00 class 0x000000
[    3.817162] pci 0001:02:0c.0: [0008:0000] type 00 class 0x000000
[    3.823452] pci 0001:02:0d.0: [0008:0000] type 00 class 0x000000
[    3.829727] pci 0001:02:0e.0: [0008:0000] type 00 class 0x000000
[    3.836013] pci 0001:02:0f.0: [0008:0000] type 00 class 0x000000
[    3.842301] pci 0001:02:10.0: [0008:0000] type 00 class 0x000000
[    3.848601] pci 0001:02:11.0: [0008:0000] type 00 class 0x000000
[    3.854888] pci 0001:02:12.0: [0008:0000] type 00 class 0x000000
[    3.861166] pci 0001:02:13.0: [0008:0000] type 00 class 0x000000
[    3.867467] pci 0001:02:14.0: [0008:0000] type 00 class 0x000000
[    3.873767] pci 0001:02:15.0: [0008:0000] type 00 class 0x000000
[    3.880049] pci 0001:02:16.0: [0008:0000] type 00 class 0x000000
[    3.886330] pci 0001:02:17.0: [0008:0000] type 00 class 0x000000
[    3.892617] pci 0001:02:18.0: [0008:0000] type 00 class 0x000000
[    3.898903] pci 0001:02:19.0: [0008:0000] type 00 class 0x000000
[    3.905198] pci 0001:02:1a.0: [0008:0000] type 00 class 0x000000
[    3.911468] pci 0001:02:1b.0: [0008:0000] type 00 class 0x000000
[    3.917768] pci 0001:02:1c.0: [0008:0000] type 00 class 0x000000
[    3.924080] pci 0001:02:1d.0: [0008:0000] type 00 class 0x000000
[    3.930354] pci 0001:02:1e.0: [0008:0000] type 00 class 0x000000
[    3.936669] pci 0001:02:1f.0: [0008:0000] type 00 class 0x000000
[    3.943186] PCI: bus2: Fast back to back transfers disabled
[    3.948780] pci 0001:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.956821] pci 0001:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    3.965024] pci 0001:03:00.0: [14e4:aa52] type 00 class 0x028000
[    3.971108] pci 0001:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    3.977944] pci 0001:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    3.984926] pci 0001:03:00.0: supports D1 D2
[    3.990080] PCI: bus3: Fast back to back transfers disabled
[    3.995681] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03
[    4.002494] pci 0001:04:00.0: [14e4:aa52] type 00 class 0x028000
[    4.008593] pci 0001:04:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[    4.015419] pci 0001:04:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[    4.022391] pci 0001:04:00.0: supports D1 D2
[    4.027573] PCI: bus4: Fast back to back transfers disabled
[    4.033179] pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04
[    4.039822] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 04
[    4.046465] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 04
[    4.053103] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 04
[    4.059741] pci 0001:02:01.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    4.067944] pci 0001:02:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    4.079488] pci 0001:01:00.0: bridge window [io  0x1000-0x0fff] to [bus 02-04] add_size 1000
[    4.087965] pci 0001:01:00.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 02-04] add_size 200000 add_align 100000
[    4.099757] pci 0001:00:00.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 01-04] add_size 200000 add_align 100000
[    4.111540] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x40cfffff]
[    4.118354] pci 0001:00:00.0: BAR 9: assigned [mem 0x40d00000-0x40ffffff 64bit pref]
[    4.126138] pci 0001:01:00.0: BAR 8: assigned [mem 0x40000000-0x40bfffff]
[    4.132953] pci 0001:01:00.0: BAR 9: assigned [mem 0x40d00000-0x40ffffff 64bit pref]
[    4.140716] pci 0001:01:00.0: BAR 0: assigned [mem 0x40c00000-0x40c03fff]
[    4.147534] pci 0001:01:00.0: BAR 7: no space for [io  size 0x1000]
[    4.153821] pci 0001:01:00.0: BAR 7: failed to assign [io  size 0x1000]
[    4.160450] pci 0001:01:00.0: BAR 7: no space for [io  size 0x1000]
[    4.166737] pci 0001:01:00.0: BAR 7: failed to assign [io  size 0x1000]
[    4.173378] pci 0001:02:01.0: BAR 8: assigned [mem 0x40000000-0x405fffff]
[    4.180180] pci 0001:02:02.0: BAR 8: assigned [mem 0x40600000-0x40bfffff]
[    4.186993] pci 0001:02:01.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[    4.194756] pci 0001:02:01.0: BAR 7: no space for [io  size 0x1000]
[    4.201033] pci 0001:02:01.0: BAR 7: failed to assign [io  size 0x1000]
[    4.207666] pci 0001:02:01.0: BAR 7: no space for [io  size 0x1000]
[    4.213947] pci 0001:02:01.0: BAR 7: failed to assign [io  size 0x1000]
[    4.220579] pci 0001:03:00.0: BAR 2: assigned [mem 0x40000000-0x403fffff 64bit]
[    4.227931] pci 0001:03:00.0: BAR 0: assigned [mem 0x40400000-0x40407fff 64bit]
[    4.235280] pci 0001:02:01.0: PCI bridge to [bus 03]
[    4.240259] pci 0001:02:01.0:   bridge window [mem 0x40000000-0x405fffff]
[    4.247068] pci 0001:02:01.0:   bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[    4.254839] pci 0001:04:00.0: BAR 2: assigned [mem 0x40800000-0x40bfffff 64bit]
[    4.262179] pci 0001:04:00.0: BAR 0: assigned [mem 0x40600000-0x40607fff 64bit]
[    4.269529] pci 0001:02:02.0: PCI bridge to [bus 04]
[    4.274513] pci 0001:02:02.0:   bridge window [mem 0x40600000-0x40bfffff]
[    4.281337] pci 0001:01:00.0: PCI bridge to [bus 02-04]
[    4.286588] pci 0001:01:00.0:   bridge window [mem 0x40000000-0x40bfffff]
[    4.293398] pci 0001:01:00.0:   bridge window [mem 0x40d00000-0x40ffffff 64bit pref]
[    4.301161] pci 0001:00:00.0: PCI bridge to [bus 01-04]
[    4.306402] pci 0001:00:00.0:   bridge window [mem 0x40000000-0x40cfffff]
[    4.313207] pci 0001:00:00.0:   bridge window [mem 0x40d00000-0x40ffffff 64bit pref]
[    4.442829] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[    4.449028] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[    4.454975] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
[    4.461998] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[    4.471044] bcma-host-soc 18000000.axi: bus0: Bus registered
[    4.477708] NET: Registered protocol family 10
[    4.483245] Segment Routing with IPv6
[    4.486989] NET: Registered protocol family 17
[    4.491486] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.504492] 8021q: 802.1Q VLAN Support v1.8
[    4.508726] Registering SWP/SWPB emulation handler
[    4.517390] UBI: auto-attach mtd4
[    4.520720] ubi0: attaching mtd4
[    4.691001] ubi0: scanning is finished
[    4.703352] ubi0: attached mtd4 (name "ubi", size 31 MiB)
[    4.708773] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.715680] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.722480] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.729459] ubi0: good PEBs: 254, bad PEBs: 1, corrupted PEBs: 0
[    4.735481] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    4.742718] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1630448408
[    4.751879] ubi0: available PEBs: 0, total reserved PEBs: 254, PEBs reserved for bad PEB handling: 19
[    4.761159] ubi0: background thread "ubi_bgt0d" started, PID 576
[    4.768056] block ubiblock0_0: created from ubi0:0(rootfs)
[    4.773588] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    4.783734] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    4.791724] Freeing unused kernel memory: 1024K
[    4.820237] Run /sbin/init as init process
[    5.091061] init: Console is alive
[    5.094623] init: - watchdog -
[    5.391222] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.478228] usbcore: registered new interface driver usbfs
[    5.483815] usbcore: registered new interface driver hub
[    5.489215] usbcore: registered new device driver usb
[    5.497330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.504563] ehci-fsl: Freescale EHCI Host controller driver
[    5.510882] ehci-platform: EHCI generic platform driver
[    5.518219] ehci-platform 18021000.usb: EHCI Host Controller
[    5.522164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.524007] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
[    5.530973] ohci-platform: OHCI generic platform driver
[    5.538131] ehci-platform 18021000.usb: irq 37, io mem 0x18021000
[    5.543392] ohci-platform 18022000.usb: Generic Platform OHCI controller
[    5.556104] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
[    5.564069] ohci-platform 18022000.usb: irq 37, io mem 0x18022000
[    5.572854] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
[    5.579565] hub 1-0:1.0: USB hub found
[    5.583519] hub 1-0:1.0: 2 ports detected
[    5.644654] hub 2-0:1.0: USB hub found
[    5.648459] hub 2-0:1.0: 2 ports detected
[    5.712834] xhci-hcd 18023000.usb: xHCI Host Controller
[    5.718104] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
[    5.725769] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000001000010010
[    5.734986] xhci-hcd 18023000.usb: irq 38, io mem 0x18023000
[    5.741373] hub 3-0:1.0: USB hub found
[    5.745277] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    5.752592] xhci-hcd 18023000.usb: xHCI Host Controller
[    5.757860] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
[    5.765294] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
[    5.772905] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.781464] hub 4-0:1.0: USB hub found
[    5.785280] hub 4-0:1.0: 1 port detected
[    5.791651] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    5.810326] init: - preinit -
[    7.436519] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
[    7.444595] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.451203] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   11.598612] UBIFS (ubi0:1): Mounting in unauthenticated mode
[   11.604466] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 751
[   11.646343] UBIFS (ubi0:1): recovery needed
[   11.776261] UBIFS (ubi0:1): recovery completed
[   11.780844] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[   11.788703] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   11.798661] UBIFS (ubi0:1): FS size: 24379392 bytes (23 MiB, 192 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs)
[   11.809137] UBIFS (ubi0:1): reserved for root: 1151498 bytes (1124 KiB)
[   11.815785] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 00CA1B1B-F9E1-46CA-9A14-2E267DFEA231, small LPT model
[   11.832439] mount_root: switching to ubifs overlay
[   11.847200] urandom-seed: Seeding with /etc/urandom.seed
[   11.959134] procd: - early -
[   11.962090] procd: - watchdog -
[   12.502918] procd: - watchdog -
[   12.507491] procd: - ubus -
[   12.564630] procd: - init -
[   13.017837] kmodloader: loading kernel modules from /etc/modules.d/*
[   13.028334] urngd: v1.0.2 started.
[   13.039322] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff
[   13.046957] Backport generated by backports.git v5.10.42-1-0-gbee5c545
[   13.077707] xt_time: kernel timezone is -0000
[   13.139325] PPP generic driver version 2.4.2
[   13.145050] NET: Registered protocol family 24
[   13.161753] usbcore: registered new interface driver brcmfmac
[   13.167684] pci_generic_config_write32: 223 callbacks suppressed
[   13.167698] pci_bus 0000:01: 1-byte config write to 0000:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
[   13.183546] pci 0000:00:00.0: enabling device (0140 -> 0142)
[   13.189224] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   13.198920] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   13.208612] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
[   13.214733] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   13.224425] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   13.390191] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[   13.558902] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.txt failed with error -2
[   13.570075] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[   15.780133] ieee80211 phy0: brcmf_msgbuf_query_dcmd: Timeout on response for query command
[   15.788428] ieee80211 phy0: brcmf_c_preinit_dcmds: Retrieving cur_etheraddr failed, -5
[   15.796380] ieee80211 phy0: brcmf_bus_started: failed: -5
[   15.801803] ieee80211 phy0: brcmf_attach: dongle is not responding: err=-5
[   18.420479] pci_bus 0001:03: 1-byte config write to 0001:03:00.0 offset 0x3c may corrupt adjacent RW1C bits
[   18.430300] pci 0001:00:00.0: enabling device (0140 -> 0142)
[   18.435977] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.445670] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.455361] pci 0001:01:00.0: enabling device (0140 -> 0142)
[   18.461043] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.470736] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.480422] pci 0001:02:01.0: enabling device (0140 -> 0142)
[   18.486094] pci_bus 0001:02: 2-byte config write to 0001:02:01.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.495785] pci_bus 0001:02: 2-byte config write to 0001:02:01.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.505469] brcmfmac 0001:03:00.0: enabling device (0140 -> 0142)
[   18.511585] pci_bus 0001:03: 2-byte config write to 0001:03:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.521286] pci_bus 0001:03: 2-byte config write to 0001:03:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   18.690219] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[   18.700782] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.txt failed with error -2
[   18.711940] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[   18.807151] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   20.980133] ieee80211 phy1: brcmf_msgbuf_query_dcmd: Timeout on response for query command
[   20.988424] ieee80211 phy1: brcmf_c_preinit_dcmds: Retrieving cur_etheraddr failed, -5
[   20.996377] ieee80211 phy1: brcmf_bus_started: failed: -5
[   21.001807] ieee80211 phy1: brcmf_attach: dongle is not responding: err=-5
[   23.700347] pci_bus 0001:04: 1-byte config write to 0001:04:00.0 offset 0x3c may corrupt adjacent RW1C bits
[   23.710162] pci 0001:02:02.0: enabling device (0140 -> 0142)
[   23.715842] pci_bus 0001:02: 2-byte config write to 0001:02:02.0 offset 0x4 may corrupt adjacent RW1C bits
[   23.725537] pci_bus 0001:02: 2-byte config write to 0001:02:02.0 offset 0x4 may corrupt adjacent RW1C bits
[   23.735225] brcmfmac 0001:04:00.0: enabling device (0140 -> 0142)
[   23.741342] pci_bus 0001:04: 2-byte config write to 0001:04:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   23.751037] pci_bus 0001:04: 2-byte config write to 0001:04:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   23.920222] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[   23.930652] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.txt failed with error -2
[   23.941805] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[   24.035369] pci_bus 0001:03: 2-byte config write to 0001:03:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   26.180133] ieee80211 phy2: brcmf_msgbuf_query_dcmd: Timeout on response for query command
[   26.188429] ieee80211 phy2: brcmf_c_preinit_dcmds: Retrieving cur_etheraddr failed, -5
[   26.196380] ieee80211 phy2: brcmf_bus_started: failed: -5
[   26.201803] ieee80211 phy2: brcmf_attach: dongle is not responding: err=-5
[   28.982905] kmodloader: done loading kernel modules from /etc/modules.d/*
[   29.230287] pci_bus 0001:04: 2-byte config write to 0001:04:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   32.283031] bgmac_bcma bcma0:3 eth0: Link is Up - 1Gbps/Full - flow control off
[   32.290405] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   32.330570] device eth0 entered promiscuous mode
[   32.335834] br-lan: port 1(eth0.1) entered blocking state
[   32.341267] br-lan: port 1(eth0.1) entered disabled state
[   32.347092] device eth0.1 entered promiscuous mode
[   32.361654] br-lan: port 1(eth0.1) entered blocking state
[   32.367142] br-lan: port 1(eth0.1) entered forwarding state
[   33.268349] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[   33.275915] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[   33.283444] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[   33.290976] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[   33.298492] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[   33.313224] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   33.323676] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[   33.331287] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[   33.338801] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[   33.346350] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[   33.353911] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[ 1228.129306] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[ 1228.137027] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[ 1228.144627] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[ 1228.152164] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[ 1228.159676] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
[ 1228.178536] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[ 1228.186112] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[ 1228.193666] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[ 1228.201197] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
[ 1228.208712] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3

The current logread shows the following:

Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.129306] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.137027] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.144627] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.152164] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.159676] leds bcm53xx:white:usb2: Failed to get trigger sources for /leds/usb2
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.178536] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.186112] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.193666] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.201197] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
Sat Sep 25 22:23:58 2021 kern.warn kernel: [ 1228.208712] leds bcm53xx:white:usb3: Failed to get trigger sources for /leds/usb3
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio0 (9611): Could not find PHY for device 'radio0'
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio2 (9613): Could not find PHY for device 'radio2'
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio1 (9612): Could not find PHY for device 'radio1'
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio0 (9636): WARNING: Variable 'data' does not exist or is not an array/object
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio0 (9636): Bug: PHY is undefined for device 'radio0'
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio2 (9637): WARNING: Variable 'data' does not exist or is not an array/object
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio2 (9637): Bug: PHY is undefined for device 'radio2'
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio1 (9638): WARNING: Variable 'data' does not exist or is not an array/object
Sat Sep 25 22:32:47 2021 daemon.notice netifd: radio1 (9638): Bug: PHY is undefined for device 'radio1'
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio0 (10076): Could not find PHY for device 'radio0'
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio2 (10078): Could not find PHY for device 'radio2'
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio1 (10077): Could not find PHY for device 'radio1'
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio2 (10101): WARNING: Variable 'data' does not exist or is not an array/object
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio2 (10101): Bug: PHY is undefined for device 'radio2'
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio0 (10098): WARNING: Variable 'data' does not exist or is not an array/object
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio0 (10098): Bug: PHY is undefined for device 'radio0'
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio1 (10102): WARNING: Variable 'data' does not exist or is not an array/object
Sat Sep 25 22:40:07 2021 daemon.notice netifd: radio1 (10102): Bug: PHY is undefined for device 'radio1'
Sat Sep 25 22:41:03 2021 daemon.notice netifd: radio0 (10337): Could not find PHY for device 'radio0'
Sat Sep 25 22:41:03 2021 daemon.notice netifd: radio0 (10348): WARNING: Variable 'data' does not exist or is not an array/object
Sat Sep 25 22:41:03 2021 daemon.notice netifd: radio0 (10348): Bug: PHY is undefined for device 'radio0'

Can someone shine some light as to why the radios are not showing? Thank you in advance.

Tried loading 21.02.0, 21.02.2, and snapshot for a family member, and saw the same behaviour and message.

In fact the wireless interfaces don’t even show in Luci.

The issue is / is partially related to missing files:

[   13.558902] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.txt failed with error -2
[   13.570075] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2

Creating these two files with any text in them puts the wireless back in the menu option. But other errors persisted.

I tried full resets after installing each of the firmware versions but same behaviour.

As it wasn’t my router I installed Tomato which works.

You guys should have read R8000's device page first. There is a warning about Broadcom wifi.

This device page, modified December 11, 2021, says it works:
https://openwrt.org/toh/netgear/r8000

Status

    Second data partition (79 MiB) not available in OpenWrt
    For a proper performance use:
        radio0 for the higher 5 GHz band (channel 149 or something else, depending on country)
        radio2 for the lower 5 GHz band (channel 48, or something like that and lower)

Very strange. It works pretty well for me, aside from some warnings in the log, and recent 2.4GHz issues associated with a new neighbor (and new wifi, accordingly) moving in...

Pretty sure the Broadcom warning is just an automatic thing, the bcm43602 is supported in the upstream Linux kernel unlike many Broadcom router chipsets, so it should work reasonably well.