Netgear R7800 cannot setup Master+Client wireless on ac

mssm · August 27, 2020, 9:25am

Trying to set up a Master and Client wireless on ac at the same time is not possible.
I have added the client network via travelmate, but it does not connect. For testing I disabled travelmate and I'm only testing those 2 networks on the ac band. I can only have the Master or the Client network up, both at the same time fails somehow.

What works is setting up 2 Master networks on ac and bgn, then adding 1 client network on bgn. But adding a client network on ac does not work.

mssm · August 27, 2020, 10:46am

If found the solution by changing the width on the Master network to 80MHz just like the upstream Client connection. Why isn't there some automatic setting for width?

I guess it is travelmates job to adapt the width accordingly so I forwarded that to the Travelmate support thread.

mssm · August 27, 2020, 10:56am

Investigating the logs I see some potential issues like
daemon.err hostapd: Failed to set beacon parameters

Thu Aug 27 11:07:17 2020 daemon.notice hostapd: wlan1: interface state ENABLED->DISABLED
Thu Aug 27 11:07:17 2020 daemon.notice hostapd: wlan1: AP-DISABLED
Thu Aug 27 11:07:17 2020 daemon.notice hostapd: wlan1: CTRL-EVENT-TERMINATING
Thu Aug 27 11:07:17 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0Thu Aug 27 11:07:17 2020 kern.info kernel: [58273.804072] device wlan1 left promiscuous mode
Thu Aug 27 11:07:17 2020 kern.info kernel: [58273.804358] br-lan: port 3(wlan1) entered disabled state
Thu Aug 27 11:07:17 2020 daemon.notice netifd: Network device 'wlan1' link is down
Thu Aug 27 11:07:17 2020 kern.warn kernel: [58273.860101] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
Thu Aug 27 11:07:17 2020 kern.warn kernel: [58273.860224] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
Thu Aug 27 11:07:17 2020 daemon.notice netifd: radio1 (23403): command failed: Not supported (-95)
Thu Aug 27 11:07:17 2020 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Thu Aug 27 11:07:17 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Thu Aug 27 11:07:23 2020 kern.warn kernel: [58280.319533] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Aug 27 11:07:23 2020 kern.warn kernel: [58280.319559] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
Thu Aug 27 11:07:23 2020 kern.info kernel: [58280.403537] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Thu Aug 27 11:07:23 2020 kern.info kernel: [58280.404403] ath10k_pci 0001:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
Thu Aug 27 11:07:24 2020 kern.warn kernel: [58280.791256] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Thu Aug 27 11:07:24 2020 kern.info kernel: [58280.791575] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
Thu Aug 27 11:07:24 2020 kern.info kernel: [58280.816264] br-lan: port 3(wlan1-1) entered blocking state
Thu Aug 27 11:07:24 2020 kern.info kernel: [58280.816302] br-lan: port 3(wlan1-1) entered disabled state
Thu Aug 27 11:07:24 2020 kern.info kernel: [58280.821030] device wlan1-1 entered promiscuous modeThu Aug 27 11:07:24 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Aug 27 11:07:24 2020 daemon.notice hostapd: wlan1-1: interface state UNINITIALIZED->ACS
Thu Aug 27 11:07:24 2020 daemon.notice hostapd: wlan1-1: ACS-STARTED
Thu Aug 27 11:07:32 2020 daemon.notice hostapd: wlan1-1: ACS-COMPLETED freq=2452 channel=9
Thu Aug 27 11:07:32 2020 daemon.err hostapd: Using interface wlan1-1 with hwaddr xx:xx:xx:xx:xx:xx and ssid "BBP-mobile"
Thu Aug 27 11:07:32 2020 daemon.notice hostapd: wlan1-1: interface state ACS->ENABLED
Thu Aug 27 11:07:32 2020 daemon.notice hostapd: wlan1-1: AP-ENABLED
Thu Aug 27 11:07:32 2020 kern.info kernel: [58289.589853] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Thu Aug 27 11:07:32 2020 daemon.notice wpa_supplicant[23725]: Successfully initialized wpa_supplicant
Thu Aug 27 11:07:33 2020 daemon.notice netifd: Interface 'trm_wwan' is enabled
Thu Aug 27 11:07:33 2020 daemon.notice wpa_supplicant[23727]: wlan1: SME: Trying to authenticate with xx:xx:xx:xx:xx:xx (SSID='BBP' freq=2412 MHz)
Thu Aug 27 11:07:33 2020 kern.info kernel: [58290.455048] wlan1: authenticate with xx:xx:xx:xx:xx:xx
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.741461] wlan1: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
Thu Aug 27 11:07:34 2020 daemon.notice wpa_supplicant[23727]: wlan1: Trying to associate with xx:xx:xx:xx:xx:xx (SSID='BBP' freq=2412 MHz)
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.748894] wlan1: authenticated
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.753885] wlan1: associate with xx:xx:xx:xx:xx:xx (try 1/3)
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.764088] wlan1: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 status=0 aid=1)
Thu Aug 27 11:07:34 2020 daemon.notice netifd: Network device 'wlan1' link is up
Thu Aug 27 11:07:34 2020 daemon.notice netifd: Interface 'trm_wwan' has link connectivity
Thu Aug 27 11:07:34 2020 daemon.notice netifd: Interface 'trm_wwan' is setting up now
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.767544] wlan1: associated
Thu Aug 27 11:07:34 2020 daemon.notice wpa_supplicant[23727]: wlan1: Associated with xx:xx:xx:xx:xx:xx
Thu Aug 27 11:07:34 2020 daemon.notice wpa_supplicant[23727]: wlan1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Thu Aug 27 11:07:34 2020 daemon.notice wpa_supplicant[23727]: wlan1: WPA: Key negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=CCMP]
Thu Aug 27 11:07:34 2020 daemon.notice wpa_supplicant[23727]: wlan1: CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed [id=0 id_str=]
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.785039] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Thu Aug 27 11:07:34 2020 daemon.notice netifd: trm_wwan (23754): udhcpc: started, v1.30.1
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.866292] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.866418] br-lan: port 3(wlan1-1) entered blocking state
Thu Aug 27 11:07:34 2020 kern.info kernel: [58290.871721] br-lan: port 3(wlan1-1) entered forwarding state
Thu Aug 27 11:07:34 2020 daemon.notice netifd: Network device 'wlan1-1' link is up
Thu Aug 27 11:07:34 2020 daemon.notice netifd: trm_wwan (23754): udhcpc: sending discover
Thu Aug 27 11:07:34 2020 daemon.notice netifd: trm_wwan (23754): udhcpc: sending select for 192.168.8.240
Thu Aug 27 11:07:34 2020 daemon.notice netifd: trm_wwan (23754): udhcpc: lease of 192.168.8.240 obtained, lease time 43200
Thu Aug 27 11:07:34 2020 daemon.notice netifd: Interface 'trm_wwan' is now up
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: reading /tmp/resolv.conf.auto
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using local addresses only for domain test
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using local addresses only for domain onion
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using local addresses only for domain localhost
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using local addresses only for domain local
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using local addresses only for domain invalidThu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using local addresses only for domain bind
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using local addresses only for domain lan
Thu Aug 27 11:07:34 2020 daemon.info dnsmasq[2014]: using nameserver 192.168.8.2#53
Thu Aug 27 11:07:34 2020 user.notice firewall: Reloading firewall due to ifup of trm_wwan (wlan1)Thu Aug 27 11:07:35 2020 user.info travelmate-1.5.4[22704]: connected to uplink 'radio1/BBP/-' (1/5, Netgear Nighthawk X4S R7800, OpenWrt 19.07.3 r11063-85e04e9f46)
Thu Aug 27 11:09:34 2020 daemon.notice netifd: Interface 'trm_wwan' is disabled
Thu Aug 27 11:09:34 2020 daemon.notice netifd: Interface 'trm_wwan' has link connectivity loss
Thu Aug 27 11:09:34 2020 daemon.notice netifd: trm_wwan (23754): udhcpc: received SIGTERM
Thu Aug 27 11:09:34 2020 daemon.notice netifd: Interface 'trm_wwan' is now down
Thu Aug 27 11:09:34 2020 daemon.warn dnsmasq[2014]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Aug 27 11:09:34 2020 daemon.notice hostapd: wlan1-1: interface state ENABLED->DISABLED
Thu Aug 27 11:09:34 2020 daemon.notice hostapd: wlan1-1: AP-DISABLED
Thu Aug 27 11:09:34 2020 daemon.notice hostapd: wlan1-1: CTRL-EVENT-TERMINATING
Thu Aug 27 11:09:34 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan1-1 disabled_11b_rates=0
Thu Aug 27 11:09:34 2020 kern.info kernel: [58411.526750] wlan1: deauthenticating from xx:xx:xx:xx:xx:xx by local choice (Reason: 3=DEAUTH_LEAVING)
Thu Aug 27 11:09:34 2020 kern.warn kernel: [58411.527928] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
Thu Aug 27 11:09:34 2020 kern.warn kernel: [58411.535153] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 2
Thu Aug 27 11:09:34 2020 daemon.notice wpa_supplicant[23727]: wlan1: CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx reason=3 locally_generated=1
Thu Aug 27 11:09:34 2020 daemon.notice wpa_supplicant[23727]: CTRL_IFACE: Detach monitor that cannot receive messages: /var/run/iwinfo-wlan1-24178\x00
Thu Aug 27 11:09:34 2020 kern.info kernel: [58411.543753] device wlan1-1 left promiscuous mode
Thu Aug 27 11:09:34 2020 kern.info kernel: [58411.548561] br-lan: port 3(wlan1-1) entered disabled state
Thu Aug 27 11:09:34 2020 daemon.err wpa_supplicant[23727]:  Failed to stop hostapd AP interfaces
Thu Aug 27 11:09:34 2020 daemon.err wpa_supplicant[23727]:  Failed to stop hostapd AP interfaces
Thu Aug 27 11:09:34 2020 daemon.notice wpa_supplicant[23727]: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Thu Aug 27 11:09:34 2020 daemon.notice netifd: Network device 'wlan1-1' link is down
Thu Aug 27 11:09:34 2020 kern.warn kernel: [58411.618847] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
Thu Aug 27 11:09:34 2020 kern.warn kernel: [58411.618881] ath10k_pci 0001:01:00.0: peer-unmap-event: unknown peer id 0
Thu Aug 27 11:09:34 2020 daemon.notice wpa_supplicant[23727]: wlan1: CTRL-EVENT-TERMINATING
Thu Aug 27 11:09:35 2020 daemon.notice netifd: radio1 (24392): command failed: Not supported (-95)
Thu Aug 27 11:09:35 2020 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Thu Aug 27 11:09:35 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Thu Aug 27 11:09:41 2020 kern.warn kernel: [58418.154906] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Aug 27 11:09:41 2020 kern.warn kernel: [58418.154932] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
Thu Aug 27 11:09:41 2020 kern.info kernel: [58418.238773] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Thu Aug 27 11:09:41 2020 kern.info kernel: [58418.239623] ath10k_pci 0001:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
Thu Aug 27 11:09:41 2020 kern.warn kernel: [58418.634164] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Thu Aug 27 11:09:41 2020 kern.info kernel: [58418.634468] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
Thu Aug 27 11:09:42 2020 kern.info kernel: [58418.740635] br-lan: port 3(wlan1) entered blocking state
Thu Aug 27 11:09:42 2020 kern.info kernel: [58418.740687] br-lan: port 3(wlan1) entered disabled state
Thu Aug 27 11:09:42 2020 kern.info kernel: [58418.745609] device wlan1 entered promiscuous mode
Thu Aug 27 11:09:42 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Aug 27 11:09:42 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->ACS
Thu Aug 27 11:09:42 2020 daemon.notice hostapd: wlan1: ACS-STARTED
Thu Aug 27 11:09:50 2020 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=2447 channel=8
Thu Aug 27 11:09:50 2020 daemon.err hostapd: Using interface wlan1 with hwaddr xx:xx:xx:xx:xx:xx and ssid "BBP-mobile"
Thu Aug 27 11:09:51 2020 kern.info kernel: [58427.718918] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Thu Aug 27 11:09:51 2020 kern.info kernel: [58427.719206] br-lan: port 3(wlan1) entered blocking state
Thu Aug 27 11:09:51 2020 kern.info kernel: [58427.724479] br-lan: port 3(wlan1) entered forwarding state
Thu Aug 27 11:09:51 2020 daemon.notice hostapd: wlan1: interface state ACS->ENABLED
Thu Aug 27 11:09:51 2020 daemon.notice hostapd: wlan1: AP-ENABLED
Thu Aug 27 11:09:51 2020 daemon.notice netifd: Network device 'wlan1' link is up
Thu Aug 27 11:11:47 2020 daemon.notice hostapd: wlan0: interface state ENABLED->DISABLED
Thu Aug 27 11:11:47 2020 daemon.notice hostapd: wlan0: AP-DISABLED
Thu Aug 27 11:11:47 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Thu Aug 27 11:11:47 2020 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0Thu Aug 27 11:11:47 2020 kern.info kernel: [58544.283317] device wlan0 left promiscuous mode
Thu Aug 27 11:11:47 2020 kern.info kernel: [58544.283495] br-lan: port 2(wlan0) entered disabled state
Thu Aug 27 11:11:47 2020 daemon.notice netifd: Network device 'wlan0' link is down
Thu Aug 27 11:11:47 2020 kern.warn kernel: [58544.327183] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Thu Aug 27 11:11:47 2020 kern.warn kernel: [58544.327302] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Thu Aug 27 11:11:47 2020 daemon.notice netifd: radio0 (25222): command failed: Not supported (-95)
Thu Aug 27 11:11:47 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Thu Aug 27 11:11:48 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Aug 27 11:11:54 2020 kern.warn kernel: [58550.721570] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Aug 27 11:11:54 2020 kern.warn kernel: [58550.721596] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
Thu Aug 27 11:11:54 2020 kern.info kernel: [58550.803555] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0 ct-sta: 0'
Thu Aug 27 11:11:54 2020 kern.info kernel: [58550.804381] ath10k_pci 0000:01:00.0: wmi print 'free: 81784 iram: 23220 sram: 14440'
Thu Aug 27 11:11:54 2020 kern.warn kernel: [58551.155452] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Thu Aug 27 11:11:54 2020 kern.info kernel: [58551.155768] IPv6: ADDRCONF(NETDEV_UP): wlan0-1: link is not ready
Thu Aug 27 11:11:54 2020 kern.info kernel: [58551.194608] br-lan: port 2(wlan0-1) entered blocking state
Thu Aug 27 11:11:54 2020 kern.info kernel: [58551.194632] br-lan: port 2(wlan0-1) entered disabled state
Thu Aug 27 11:11:54 2020 kern.info kernel: [58551.199166] device wlan0-1 entered promiscuous modeThu Aug 27 11:11:54 2020 daemon.notice hostapd: ACS: Automatic channel selection started, this may take a bit
Thu Aug 27 11:11:54 2020 daemon.notice hostapd: wlan0-1: interface state UNINITIALIZED->ACS
Thu Aug 27 11:11:54 2020 daemon.notice hostapd: wlan0-1: ACS-STARTED
Thu Aug 27 11:12:01 2020 daemon.notice hostapd: wlan0-1: ACS-COMPLETED freq=5180 channel=36
Thu Aug 27 11:12:01 2020 daemon.err hostapd: Using interface wlan0-1 with hwaddr xx:xx:xx:xx:xx:xx and ssid "BBP-mobile[ac]"
Thu Aug 27 11:12:01 2020 daemon.notice hostapd: wlan0-1: interface state ACS->ENABLED
Thu Aug 27 11:12:01 2020 daemon.notice hostapd: wlan0-1: AP-ENABLED
Thu Aug 27 11:12:01 2020 kern.info kernel: [58558.395257] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Aug 27 11:12:01 2020 daemon.notice wpa_supplicant[25602]: Successfully initialized wpa_supplicant
Thu Aug 27 11:12:01 2020 daemon.notice netifd: Interface 'trm_wwan' is enabled
Thu Aug 27 11:12:04 2020 daemon.notice wpa_supplicant[25603]: wlan0: SME: Trying to authenticate with xx:xx:xx:xx:xx:xx (SSID='BBP[ac]' freq=5745 MHz)
Thu Aug 27 11:12:04 2020 kern.info kernel: [58561.633234] wlan0: authenticate with xx:xx:xx:xx:xx:xx
Thu Aug 27 11:12:05 2020 kern.info kernel: [58561.899813] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
Thu Aug 27 11:12:05 2020 daemon.notice wpa_supplicant[25603]: wlan0: Trying to associate with xx:xx:xx:xx:xx:xx (SSID='BBP[ac]' freq=5745 MHz)
Thu Aug 27 11:12:05 2020 kern.info kernel: [58561.907924] wlan0: authenticated
Thu Aug 27 11:12:05 2020 kern.info kernel: [58561.913175] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
Thu Aug 27 11:12:05 2020 kern.info kernel: [58561.924009] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x11 status=0 aid=3)
Thu Aug 27 11:12:05 2020 kern.info kernel: [58561.924871] wlan0: associated
Thu Aug 27 11:12:05 2020 daemon.notice netifd: Network device 'wlan0' link is up
Thu Aug 27 11:12:05 2020 daemon.notice netifd: Interface 'trm_wwan' has link connectivity
Thu Aug 27 11:12:05 2020 daemon.notice netifd: Interface 'trm_wwan' is setting up now
Thu Aug 27 11:12:05 2020 daemon.notice wpa_supplicant[25603]: wlan0: Associated with xx:xx:xx:xx:xx:xx
Thu Aug 27 11:12:05 2020 daemon.notice wpa_supplicant[25603]: wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Thu Aug 27 11:12:05 2020 daemon.notice wpa_supplicant[25603]: wlan0: WPA: Key negotiation completed with xx:xx:xx:xx:xx:xx [PTK=CCMP GTK=CCMP]
Thu Aug 27 11:12:05 2020 daemon.notice wpa_supplicant[25603]: wlan0: CTRL-EVENT-CONNECTED - Connection to xx:xx:xx:xx:xx:xx completed [id=0 id_str=]
Thu Aug 27 11:12:05 2020 kern.info kernel: [58561.949043] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Aug 27 11:12:05 2020 daemon.notice netifd: trm_wwan (25631): udhcpc: started, v1.30.1
Thu Aug 27 11:12:05 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:05 2020 daemon.notice netifd: trm_wwan (25631): udhcpc: sending discover
Thu Aug 27 11:12:07 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:08 2020 daemon.notice netifd: trm_wwan (25631): udhcpc: sending discover
Thu Aug 27 11:12:08 2020 daemon.notice netifd: trm_wwan (25631): udhcpc: sending select for 192.168.8.239
Thu Aug 27 11:12:08 2020 daemon.notice netifd: trm_wwan (25631): udhcpc: lease of 192.168.8.239 obtained, lease time 43200
Thu Aug 27 11:12:08 2020 daemon.notice netifd: Interface 'trm_wwan' is now up
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: reading /tmp/resolv.conf.auto
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using local addresses only for domain test
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using local addresses only for domain onion
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using local addresses only for domain localhost
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using local addresses only for domain local
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using local addresses only for domain invalidThu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using local addresses only for domain bind
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using local addresses only for domain lan
Thu Aug 27 11:12:08 2020 daemon.info dnsmasq[2014]: using nameserver 192.168.8.2#53
Thu Aug 27 11:12:08 2020 user.notice firewall: Reloading firewall due to ifup of trm_wwan (wlan0)Thu Aug 27 11:12:13 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:19 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:25 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:31 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:37 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:43 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:49 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:12:55 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:13:01 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:13:07 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:13:13 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:13:19 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:13:25 2020 daemon.err hostapd: Failed to set beacon parameters
Thu Aug 27 11:13:31 2020 daemon.err hostapd: Failed to set beacon parameters