I currently have 24.10.0 installed on my R7450 and after some time (seems to be 12+ hours usually but it has happened as low as 3 hours) the lan port leds start acting odd. I only have stuff plugged into lan ports 1 and 2 but occasionally lan ports 3 and 4 will light up either amber or amber and white at the same time. When this happens I have checked the web ui and there hasn't been any activity on those ports and if I plug something into those ports it seems to still be fine and I still get gigabit speeds on them. Nobody else is here so I know nothing else has been plugged into them.
This has even happened once on the wan port led where it changed to amber+white but I was still getting my expected speeds and everything seems fine. I tried going back to stock and after almost 2 full days of the router being up and running the leds all acted as expected so I decided to try 23.05.5 but the issue still happens. Once lan port 3 changed to amber so I rebooted the router then it changed to white a few hours later and once all 4 lan ports changed to amber+ white at the same time.
I figure since I am getting the speeds I would expect that this is just a visual bug and I shouldn't worry about it but I thought I would ask here if anybody has any advice on what to try. If this is the wrong forum to post this sorry 
Thanks