Need help with WRT to Eltex RT-GM-3

Hardware Questions and Recommendations
1

I have Iskratel Eltex RT-GM-3 GPON
HW — HW: A2
WAN by – GPON

Mainboard:
CPU – ECONET EN7526GT
Flash – 128 МБ
RAM — 256 МБ
FXS – LE964

Wi-Fi:
WiFi 2.4 GHz – MT7592 (802.11 b/g/n)
WiFi 5 GHz – MT7615B (802.11 n/ac)

Ports:
1 x WAN (SFP SC/APC)
4 x LAN (Gigabit Ethernet 1000Base-T)
1 x USB 2.0
1 x FXS (H.248, SIP)

i can't find WRT for this router

2

Makes two of us, it's currently unsupported.

3 Likes
3

So far nobody found an econet device that could netboot to confirm whether it is close enough to ramips to treat it as such.
If wan sfp module contains full pon logic to hold subscriber profile it can be retrofitted to other sfp-wan device. As mentioned rest is black box so far.

4

Sounds like "Just buy additional used router" )))

5

Buy a new one better.
Does your device have a separate SFP unit?

---https://commons.m.wikimedia.org/wiki/File:SFP_board_2.jpg

Here your shopping list - cudy and glinet cheapest.

---https://openwrt.org/toh/views/toh_available_16128_ax-wifi