Need help to install LEDE in HiveAP130 BCM CPU

For Developers
1

need help y have this router Aerohive AP130

check the info
Aerohive AP130
Availability: common

FCC approval date: 12 February 2015
Country of manuf.: China

Type: access point

FCC ID: WBV-AP130

Power: 48 VDC, 0.43 A
Connector type: PoE
Power over Ethernet (PoE) tag: 802.3af, standard

CPU1: Broadcom BCM53015A1 (800 MHz, 2 cores)
FLA1: 512 MiB (Spansion S34ML04G100TFI00)
RAM1: 256 MiB (SK Hynix H5TQ2G63FFR-PBC)
Expansion IFs: none specified
Serial: yes, RJ45

WI1 chip1: Broadcom BCM43520
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM43520
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: Broadcom BCM53015A1
LAN speed: 10/100/1000
LAN ports: 1

abgn+ac

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1081 additional devices
of which 0 are Aerohive devices
Default login user: admin
Default login password: aerohive
admin:aerohive credentials used by 5 additional devices
of which 5 are Aerohive devices

2

AFAIK the wlan cards are unsupported/ unsupportable.

1 Like
3

i have too HiveAP320 and edimax extender EW-7438AC

i needcombert this to openWRT

4

You WILL NOT have WiFi. Is this OK?

5

I have this 3 devices but i live in cuba and aerohive AP130 and AP 320 i cant work propely with this devices for the soft here is imposible to work...and las time i make one work 100%ok the HiveAP330 and work very well....and now come one edimax extender CPU MTK and i see many devices suported whit this CPU....

Need help to convert the Edimax extender or HiveAP320