Need help by money (Netgear D2200D)

For Developers
1

Hi
I have NETGEAR D2200D
System-On-Chip Broadcom BCM6318
Wireless BCM43217 ineed convert to openwrt . If can any engineer contact me.

Moderator Edit: I have removed the contact information -- users may contact the OP with a private message.

2

Your device is not supported by OpenWrt. It is not listed in the Table of Hardware

1 Like
4

It is worth looking at this device which appears to use the chipsets. Importantly, see the warnings at the top of the page... the DSL modem is not functional and wifi performance will be extremely poor.

Your two best options are:

  1. Get a device that is supported by OpenWrt.
  2. Use the existing vendor-supplied/stock firmware on your device.
1 Like
5

That's a BCM6328 not BM6318

A good BCM6318 example: https://openwrt.org/toh/comtrend/ar-5315u

@Ahmedalyaremi do know full hardware specs, like RAM and flash size?. Also if you have access to the serial port, it should be easier to add support.

6

ah... good point. but the warnings are the same... barely functional wifi + no DSL.