I just flashed Openwrt to my Netgear Nighthawk X4S AC2600 and the process went fine everything seems to be in working order except for the fact that I can't access the internet from the router now. I have the router plugged directly into my modem as opposed to an upstream router as that's what I was doing before I flashed openwrt to it. Is there some setting I need to change with the interfaces or what?
Clone WAN MAC over from the old, to the new router.
2 Likes
OR power down the modem and the router wait for 30 minutes, power up the modem and after 5 minutes power up the router.
The modem has to learn your new MAC address , cloning the old MAC address is of course also a viable option
1 Like