NAT Loopback (Hairpin) isn't working: No rewriting Occuring OpenWrt 23.05.2

Installing and Using OpenWrt Network and Wireless Configuration
7

Can you share with me the config you reference that places the packet in the source network? 22.03.2 - NAT reflection / hairpinning? - #2 by lleachii

My updated partial firewall config

config redirect
    option dest 'lan'
    option target 'DNAT'
    option name 'services-80'
    option src 'wan'
    option src_dport '80'
    option dest_ip '192.168.1.4'
    option dest_port '80'
    list reflection_zone 'lan'

config redirect
    option dest 'lan'
    option target 'DNAT'
    option name 'service-443'
    option src 'wan'
    option src_dport '443'
    option dest_ip '192.168.1.4'
    option dest_port '443'
    list reflection_zone 'lan'

config rule
    option src 'lan'
    option dest 'lan'
    option target 'ACCEPT'
    list dest_ip '<wan external ip>'

config zone
    option name 'lantolan'
    option input 'ACCEPT'
    option output 'ACCEPT'
    option forward 'ACCEPT'
    option log '1'
    option log_limit '10'
    list network 'lan'

config forwarding
    option src 'lantolan'
    option dest 'lan'

config forwarding
    option src 'lan'
    option dest 'lantolan'