Brume 2 at home, able to accept incoming UDP connections via a tunnel thru a VPS with public IP
Slate Plus somewhere else
While away from home using Slate Plus I want to do two VPN things via Wireguard:
Be able to talk to machines on the home network under Brume 2
Route all other public internet traffic thru a separate VPN endpoint
I've been searching thru the threads, and it seems like it might potentially be possible with Route Mode: Auto Detect (as selected under VPN Client heading in VPN Dashboard on Slate Plus 4.5.19) but I can't see where it's possible to activate multiple Wireguard client profiles at once.
It appears you are using firmware that is not from the official OpenWrt project.
When using forks/offshoots/vendor-specific builds that are "based on OpenWrt", there may be many differences compared to the official versions (hosted by OpenWrt.org). Some of these customizations may fundamentally change the way that OpenWrt works. You might need help from people with specific/specialized knowledge about the firmware you are using, so it is possible that advice you get here may not be useful.
Ask for help from the maintainer(s) or user community of the specific firmware that you are using.
Provide the source code for the firmware so that users on this forum can understand how your firmware works (OpenWrt forum users are volunteers, so somebody might look at the code if they have time and are interested in your issue).
If you believe that this specific issue is common to generic/official OpenWrt and/or the maintainers of your build have indicated as such, please feel free to clarify.
