I am trying to connect a Raspberry Pi Compute module 4 without wifi chip to the network with an external MT7921 PCIe card. It shows up fine in lspci.I installed all driver related packages. Iw list returns nl80211 not found. I tried finding related info about this error but was not succesful. Below my pci dmesg
root@OpenWrt:~# dmesg | grep pci
[ 0.177237] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.177271] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.177316] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 0.177357] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
[ 0.200009] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 0.200186] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.200207] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.200225] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 0.200278] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.200362] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.203823] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.203972] pci 0000:01:00.0: [14c3:7961] type 00 class 0x028000
[ 0.204018] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
[ 0.204054] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
[ 0.204088] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
[ 0.204207] pci 0000:01:00.0: supports D1 D2
[ 0.204220] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207576] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.207620] pci 0000:00:00.0: BAR 9: assigned [mem 0x600000000-0x6001fffff 64bit pref]
[ 0.207646] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x6000fffff 64bit pref]
[ 0.207679] pci 0000:01:00.0: BAR 2: assigned [mem 0x600100000-0x600103fff 64bit pref]
[ 0.207711] pci 0000:01:00.0: BAR 4: assigned [mem 0x600104000-0x600104fff 64bit pref]
[ 0.207743] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.207760] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6001fffff 64bit pref]
[ 0.207967] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.208099] pcieport 0000:00:00.0: PME: Signaling with IRQ 42
[ 0.208377] pcieport 0000:00:00.0: AER: enabled with IRQ 42
[ 0.296656] pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
[ 0.296693] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 0.296714] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000
[ 0.296734] pcieport 0000:00:00.0: [ 7] BadDLLP
[ 0.297776] pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
[ 0.297804] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 0.297822] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000
[ 0.297842] pcieport 0000:00:00.0: [ 7] BadDLLP
[ 0.298217] pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
[ 0.298247] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 0.298267] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000
[ 0.298287] pcieport 0000:00:00.0: [ 7] BadDLLP
[ 0.298510] pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
[ 0.298538] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 0.298557] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000
[ 0.298576] pcieport 0000:00:00.0: [ 7] BadDLLP
[ 0.298679] pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
[ 0.298705] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 0.298724] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000
[ 0.298743] pcieport 0000:00:00.0: [ 7] BadDLLP
[ 0.299111] pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0
[ 0.299138] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 0.299156] pcieport 0000:00:00.0: device [14e4:2711] error status/mask=00000080/00002000
[ 0.299180] pcieport 0000:00:00.0: [ 7] BadDLLP
[ 0.299198] pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
[ 0.299220] pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0