With VLAN patches the upload speed stucked at 100Mb instead of 1Gb.
[65961.473728] mt7530 mdio-bus:1f lan1: Link is Up - 100Mbps/Full - flow control off
[65961.481419] br-lan: port 1(lan1) entered blocking state
[65961.486670] br-lan: port 1(lan1) entered listening state
[65965.775047] mt7530 mdio-bus:1f lan1: Link is Down
[65965.780251] br-lan: port 1(lan1) entered disabled state
[65967.848922] mt7530 mdio-bus:1f lan1: Link is Up - 100Mbps/Full - flow control off
[65967.856614] br-lan: port 1(lan1) entered blocking state
[65967.861839] br-lan: port 1(lan1) entered listening state
[65976.054938] br-lan: port 1(lan1) entered learning state
[65984.374771] br-lan: port 1(lan1) entered forwarding state
[65984.380182] br-lan: topology change detected, propagating
[65986.515766] mt7530 mdio-bus:1f lan1: Link is Down
[65986.520609] br-lan: port 1(lan1) entered disabled state
[65999.413392] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[65999.420971] br-lan: port 1(lan1) entered blocking state
[65999.426209] br-lan: port 1(lan1) entered listening state
[66008.054265] br-lan: port 1(lan1) entered learning state
[66016.374086] br-lan: port 1(lan1) entered forwarding state
[66016.379539] br-lan: topology change detected, propagating
iperf3 -c 192.168.1.1 -n 200m
PC->MI-R3P
Connecting to host 192.168.1.1, port 5201
[ 5] local 192.168.1.30 port 45512 connected to 192.168.1.1 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 12.4 MBytes 104 Mbits/sec 0 106 KBytes
[ 5] 1.00-2.00 sec 11.2 MBytes 93.8 Mbits/sec 0 153 KBytes
[ 5] 2.00-3.00 sec 11.2 MBytes 93.8 Mbits/sec 0 116 KBytes
[ 5] 3.00-4.00 sec 11.2 MBytes 93.8 Mbits/sec 0 96.2 KBytes
[ 5] 4.00-5.00 sec 11.2 MBytes 93.8 Mbits/sec 0 209 KBytes
[ 5] 5.00-6.00 sec 11.2 MBytes 93.8 Mbits/sec 0 99.0 KBytes
[ 5] 6.00-7.00 sec 11.2 MBytes 93.8 Mbits/sec 0 119 KBytes
[ 5] 7.00-8.00 sec 11.2 MBytes 94.3 Mbits/sec 0 140 KBytes
[ 5] 8.00-9.00 sec 11.2 MBytes 93.8 Mbits/sec 0 127 KBytes
[ 5] 9.00-10.00 sec 11.2 MBytes 93.8 Mbits/sec 0 130 KBytes
[ 5] 10.00-11.00 sec 10.8 MBytes 90.2 Mbits/sec 0 107 KBytes
[ 5] 11.00-12.00 sec 11.7 MBytes 97.9 Mbits/sec 0 120 KBytes
[ 5] 12.00-13.00 sec 11.2 MBytes 93.8 Mbits/sec 0 119 KBytes
[ 5] 13.00-14.00 sec 11.2 MBytes 93.8 Mbits/sec 0 105 KBytes
[ 5] 14.00-15.00 sec 10.7 MBytes 89.7 Mbits/sec 0 105 KBytes
[ 5] 15.00-16.00 sec 11.7 MBytes 97.9 Mbits/sec 0 127 KBytes
[ 5] 16.00-17.00 sec 10.8 MBytes 90.2 Mbits/sec 0 150 KBytes
[ 5] 17.00-17.78 sec 9.05 MBytes 96.7 Mbits/sec 0 90.5 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-17.78 sec 200 MBytes 94.3 Mbits/sec 0 sender
[ 5] 0.00-17.79 sec 199 MBytes 93.8 Mbits/sec receiver
MI-R3P->PC
root@MI-R3P:~# iperf3 -c 192.168.1.30 -n 200m
Connecting to host 192.168.1.30, port 5201
[ 5] local 192.168.1.1 port 1812 connected to 192.168.1.30 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 56.2 MBytes 472 Mbits/sec 0 368 KBytes
[ 5] 1.00-2.00 sec 49.5 MBytes 415 Mbits/sec 0 303 KBytes
[ 5] 2.00-3.00 sec 48.8 MBytes 408 Mbits/sec 0 379 KBytes
[ 5] 3.00-3.88 sec 45.4 MBytes 433 Mbits/sec 0 337 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-3.88 sec 200 MBytes 432 Mbits/sec 0 sender
[ 5] 0.00-3.89 sec 199 MBytes 429 Mbits/sec receiver