Hi to all
i have Cudy WR1000, dual band
2.4 GHz working fine, i could setup multiple AP SSID
but on 5 GHz, only one SSID
tried with 19.07 and 21.02
did i make something wrong? or MT67x2e support only one SSID ??
It should work. It uses the same mediatek chips as xiaomi 4a 100m, which i do own and have tested.
thank you for reply
Fri Oct 8 16:54:26 2021 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=5500 channel=100
Fri Oct 8 16:54:26 2021 daemon.err hostapd: Using interface wlan1 with hwaddr c0:03:01:00:01:02 and ssid "ele-lan5"
Fri Oct 8 16:54:27 2021 kern.info kernel: [90895.086617] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
Fri Oct 8 16:54:27 2021 kern.info kernel: [90895.099455] br-lan200: port 2(wlan1) entered blocking state
Fri Oct 8 16:54:27 2021 kern.info kernel: [90895.110553] br-lan200: port 2(wlan1) entered forwarding state
Fri Oct 8 16:54:27 2021 kern.info kernel: [90895.145472] br-lan2: port 3(wlan1-1) entered blocking state
Fri Oct 8 16:54:27 2021 kern.info kernel: [90895.156604] br-lan2: port 3(wlan1-1) entered disabled state
Fri Oct 8 16:54:27 2021 kern.info kernel: [90895.168016] device wlan1-1 entered promiscuous mode
Fri Oct 8 16:54:27 2021 daemon.err hostapd: Could not set interface wlan1-1 flags (UP): Resource busy
this is the error which came up if i try to enable more than one SSID on 5GHz side
same config working fine on other type wifi chips