Mr600 archer v2 eu bootloader wiped

Please someone help me how to fix this. I mistakenly wiped my bootloader and uboot now my router completely dead not showing any lights when power.

I cant restore with ttl because ethernet doesnt work. Does anyone know how to fix this issue?

Router is Tplink MR600 v2 eu was running openwrt on it

Flash chip reader/writer.

Was :slight_smile:

Was? Lol you mean no fix?

Fix is what I wrote.

Please help explain how to Fix with flash chip. Router doesnt boot at all or show lights

Google ch341a flashing.

Well, you did wipe the boot loader.

Oh ok thanks i will be back let me check

I managed to flash stock dump i extracted from stock firmware and router boot to stock firmware. Now i cant flash openwrt and my lte and imei not working. It gives generic mac and imei

guess you wiped more than the boot loader.

Yes please is there a way for me?

you would need a flash dump from a working device.

Any available i can download please. Am so desperate

no one provides those AFAIK, you'll need to get/request one from someone who owns the same device you do.

I'm guessing you're not actually in EU ?
a ZTE MF28?? is probably 25€ nowadays making the resurrection of the MR600 not really worth the effort.

No am not in eu. Reason i need this specific router is because isp only requires it other routers doesnt work.

I finally found a dump online which works .

Problem i got different imei and mac in it. Anyway to fix that issue now?

if you use a EU router outside EU, how can the ISP limit you, it can't be an ISP branded device, or is it ?

you'll need to find and change them using a hex editor, I guess.

MAC not matching shouldn't really have any impact though, IMEI might.

Yes its isp branded. Isp need to see my imei while connecting to network otherwise they block the connection

then I guess any device would work, if you're able to change the IMEI.

Yes that is the issue. Finding that imei in the dump i flashed. I already open it in hex editor but cant find it

I assume you're looking for the corresponding hex values, not the actual numbers ?

Yes i looked for both dont find anything