# MR36 bootloader uboot source code

**URL:** <https://forum.openwrt.org/t/mr36-bootloader-uboot-source-code/204097>\
**Category:** For Developers\
**Created:** [July 15, 2024, 3:04pm UTC](https://forum.openwrt.org/t/mr36-bootloader-uboot-source-code/204097 "2024-07-15T15:04:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Toufik](https://forum.openwrt.org/letter_avatar/toufik/32/5_5575768a8748004e209b776fc1b2916d.png) [@Toufik](https://forum.openwrt.org/u/Toufik)\
**Post date:** [July 15, 2024, 3:04pm UTC](https://forum.openwrt.org/t/mr36-bootloader-uboot-source-code/204097/1 "2024-07-15T15:04:13Z")

</div>

Hello

I’m starting this discussion to share my experience from last year when I requested the source code for the bootloader of the Meraki MR36 from Cisco. Although I no longer have the router, I believe this information could be valuable to the community. Here is their response:

"The open source bootloader you requested can be downloaded using the following link:  
[https://dl.meraki.net/oss/U-boot-MR36-20240711.tar.bz2](https://dl.meraki.net/oss/U-boot-MR36-20240711.tar.bz2)

The build instructions are as follows:  
export CROSS\_COMPILE=/path/to/arm64-cross-toolchain  
cd U-boot.MR44  
make axe\_defconfig  
make

Best Regards,  
Meraki Open Source"

Hope this will help