Moderately Customized LEDE Development Builds help

Installing and Using OpenWrt
1

good day everybody please help me in this matter so wrong I have introduced firmware to v1 acs in acs v2nga this version Moderately Customized LEDE Development Builds and now linsysi does not work light up ok ok yes i have no access to the internet with putty and winscp not I can enter the original firmware source with this sysupgrade command -n -F / tmp / FW to go back please advise how to go back to the factory software or lede 17.01.3 for the linksys wrt1900acs v2 version please help

2

please help

3

please help

4

The wrt routers have two partitions, firmware is installed on each, follow these instructions to switch over to the other partition and you may have working firmware there, although there is no way to be sure -

Power off router with power switch.
Turn power back on and Power LED will light.
As soon as all LEDs turn off (~2s), power off router with power switch
Turn power back on and Power LED will light.
As soon as all LEDs turn off (~2s), power off router with power switch
Turn power back on and Power LED will light.
As soon as all LEDs turn off (~2s), power off router with power switch
Turn power back on and allow router to fully boot.
It should now be booted to the alternate firmware partition
5

thanks sir verry thanks for help

6

its back to original firmware linksys