Can anyone teach me how can i use PADAVAN Firmware in my Mi Router 4C. Because the other users says the PADAVAN use correct drivers for MI 4C. so i want to use it. Because my wifi in Mi 4c still disappear
1 Like
It appears you are using firmware that is not from the official OpenWrt project.
When using forks/offshoots/vendor-specific builds that are "based on OpenWrt", there may be many differences compared to the official versions (hosted by OpenWrt.org). Some of these customizations may fundamentally change the way that OpenWrt works. You might need help from people with specific/specialized knowledge about the firmware you are using, so it is possible that advice you get here may not be useful.
You may find that the best options are:
- Install an official version of OpenWrt, if your device is supported (see https://firmware-selector.openwrt.org).
- Ask for help from the maintainer(s) or user community of the specific firmware that you are using.
- Provide the source code for the firmware so that users on this forum can understand how your firmware works (OpenWrt forum users are volunteers, so somebody might look at the code if they have time and are interested in your issue).
Please contact Padavan's support venues for questions about their firmware, this is OpenWrt, dealing with issues about OpenWrt.
3 Likes
I am already using Official openwrt firmware for mi router 4C.
If you continue using OpenWrt, this is the place to get help with your router. But your request was:
as @slh already said, if that's what you want, the padavan user community is where you should seek that type of assistance.
If you have a question about using OpenWrt, though, feel free to ask it here.
1 Like
same installation like openwrt all you have to do is to invade the router using OpenwrtInvasion
Login from telnet
cd /tmp
wget -O padavan.bin http://ip/padavan.bin (python.http.server)
mtd -e OS1 -r write /tmp/padavan.bin OS1
After reboot your router turn into a padavan