Hello,
How can I set up a mesh network using mesh11sd?
I need to know the required packages and the necessary uci commands. I have two AX routers.
What should I configure on the first router and what should I configure on the second router?
Thank you in advance! 
Read this first:
https://openwrt.org/docs/guide-user/network/wifi/mesh/rapiddeployment
Then come back and ask questions.
root@OpenWrt:~# mesh11sd status
{
"setup":{
"version":"4.1.1",
"enabled":"1",
"procd_status":"running",
"portal_detect":"1",
"portal_detect_threshold":"0",
"portal_channel":"default",
"channel_tracking_checkinterval":"30",
"mesh_basename":"m-11s-",
"auto_config":"1",
"auto_mesh_network":"lan",
"auto_mesh_band":"2g40",
"auto_mesh_id":"ef04536e0c631e396b20753b05418b",
"mesh_gate_enable":"1",
"mesh_leechmode_enable":"0",
"mesh_gate_encryption":"sae",
"txpower":"",
"mesh_path_cost":"10",
"mesh_path_stabilisation":"1",
"checkinterval":"10",
"interface_timeout":"10",
"ssid_suffix_enable":"1",
"debuglevel":"1"
},
"interfaces":{
}
}
Okay, I just set it up, but once installed, my LAN keeps connecting and disconnecting constantly.
I don't understand why.
Clearly you have not followed the documentation - your status output is showing invalid options have been set and no wireless interfaces have started.
In the Firmware selector custom page, what did you put in the
?
Please also show the output, for each device, of:
ubus call system board
i will stop my investigation because my wireless is broken, sorry
wifi broken while 2 days root@meshnode-1f20fe:~# mesh11sd status awk: cmd. line:1: (FILENAME=- FNR=2) fatal: not enough arguments to satisfy format string %s phy1-mesh0'
^ ran out for this one
{
many bug i'm lost
`
i have learn the read me but is not really clear for me i has make many test for my home
