Hallo Gemeinde,
ich habe vor eier Weile einen Meraki MX65W bekommen und wollte Openwrt darauf installieren, weil mir die Verwaltung über Cloud überhaubt nicht gefällt. Sollte doch alles in meiner Hand sein.
Jetzt hab ich verschiedene Varianten ausprobiert, aber leider führte keine zum Ziel.
Ich bekomme einfach die *.bin nicht auf das Gerät d.h. über diese Protokolle bekomme ich zwar Verbindung aber kann nichts hochladen.
Hab es über scp, ssh oder hab auch ein serielles Kabel angeschlossen und so den konnect bekommen. Aber nichts hilft weiter.
Hat jemand für mich einen Leitfaden, an dem ich mich langhangeln kann und somit endlich zum Ziel komme? Bitte um Hilfe !
MfG
Ben
Da mein Englich nich gut ist hier die Übersetzung von Google:
Hello everyone,
I got a Meraki MX65W a while ago and wanted to install OpenWrt on it because I don't like cloud management at all. I should be able to manage everything myself.
I've tried various options, but unfortunately none of them worked.
I simply can't get the *.bin file on the device, meaning I can connect using these protocols, but I can't upload anything.
I've connected it via scp, ssh, or a serial cable and got the connection that way. But nothing helps.
Does anyone have a guide I can follow to finally achieve my goal? Please help!
Hallo,
ist leider nach der Anleitung voll in die Hose gegangen. Kein Zugriff über IP !! Nur noch über serielle Konsole und dann Kam die Meldung "can't get kernel Image".
Hoffe das ich ihn nicht voll geschrottet habe. Hat jemand eine Indee oder eine Anleitung??
MfG
Hier noch mal per Google übersetzt:
Hello,
Unfortunately, following the instructions completely failed. No access via IP!! Only via serial console, and then I got the message "can't get kernel image."
I hope I didn't completely ruin it. Does anyone have an idea or instructions??
Regards
On serial type 'printenv' to see what ip addresses are for device and server.
Make your PC ip address as server-ip and connect to device-ip.
Follow instructions on https://github.com/clayface/U-boot-MX64-20190430_MX65.
HI,
I did that. The IP was 192.168.0.1. A connection wasn't possible, neither via SSH nor Telnet, only via console.
This means the following description of how to proceed is out of the question. I'm really at a loss. Before this whole thing, I at least had a connection, but now nothing!!
Urgent help, please!!
Regards
Don't panic, but be more specific: The IP was 192.168.0.1, which ip was 192.168.0.1? What was the other ip?
First you have to make sure there is a connection between PC and your device. (normally port1, i asume)
You said you have a serial connection, use that to determine both ip addresses -> 'printenv'.
Hello,
I got it back to life with your help and on the *.bin from Winternull, thanks for that. Unfortunately, the Wi-Fi isn't working yet. The network adapter isn't recognized. Any idea why not? Is it a wrong driver?
Regards