my cudy wr1300 v3 model router , when I use OpenWrt on my router signal is very low
what's version 5.02 ?
2 Likes
I presume you followed this page:
https://openwrt.org/toh/hwdata/cudy/cudy_wr1300_v2
and thus downloaded openwrt-23.05.2-ramips-mt7621-cudy_wr1300-v2-squashfs-sysupgrade.bin ? (which would be 23.05.2 then)
This version only works properly with WR1300 v2 - in recent snapshot-builds, there is a dedicated build for v3, see https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-cudy_wr1300-v1-initramfs-kernel.bin
Edit: This post explains the 3dBm-Issue: Openwrt firmware realease for cudy wr1300 v3 router - #5 by zekica
2 Likes