where to enter config 'samba' not work in softwer lui now in ssh
Unknown package 'smbcontrol'. lui
login as: root
root@192.168.1.27's password:
Access denied
root@192.168.1.27's password:
BusyBox v1.28.4 () built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt 18.06.9, r8077-7cbbab7246
-----------------------------------------------------
root@TL-WR1043v1:~# config 'samba'
-ash: config: not found
root@TL-WR1043v1:~#
root@TL-WR1043v1:~# smbcontrol
-ash: smbcontrol: not found
root@TL-WR1043v1:~#
`
in mozila same
Not Found
The requested URL /etc/config/samba was not found on this server.
did sda1 will be mounted after i enter password and user name wich i no idea how to set or have how
did mounted sda1 should be on link ui mounted points or that and mounted file system
and is it ok all installed? all packaged frollic where is my wrong in all these?
dear openwrt i will finish topic dont worry i just need know how to setup username pass acces on open wrt i never do that these is why i ask so much sorry
how to go in common options?
These are the default settings for the common options:
config 'samba'
option 'name' 'lede'
option 'workgroup' 'lede'
option 'description' 'Samba on lede'
option 'charset' 'UTF-8'
option 'homes' '0'
option 'interface' 'loopback lan'
whu i cant connect on 23 via telnet?
putty says permisson denied? so what now why that
-----------------------------------------------------
root@TL-WR1043v1:~# config 'samba'
-ash: config: not found
root@TL-WR1043v1:~# config
-ash: config: not found
root@TL-WR1043v1:~# config -ash
-ash: config: not found
root@TL-WR1043v1:~# -ash
-ash: -ash: not found
root@TL-WR1043v1:~# help
-ash: help: not found
root@TL-WR1043v1:~# cd
root@TL-WR1043v1:~# cd/tmp
-ash: cd/tmp: not found
root@TL-WR1043v1:~# cd
root@TL-WR1043v1:~# config
-ash: config: not found
root@TL-WR1043v1:~# /etc/config/samba
-ash: /etc/config/samba: Permission denied
root@TL-WR1043v1:~# ^C
root@TL-WR1043v1:~#
nothing
root@TL-WR1043v1:~# # cd /etc/
root@TL-WR1043v1:~# # l -d samba
root@TL-WR1043v1:~# # l samba
root@TL-WR1043v1:~# config
-ash: config: not found
root@TL-WR1043v1:~# /etc/selinux/config
-ash: /etc/selinux/config: not found
root@TL-WR1043v1:~#
root@TL-WR1043v1:~#
root@TL-WR1043v1:~# ^C
root@TL-WR1043v1:~# /etc/config/samba
-ash: /etc/config/samba: Permission denied
root@TL-WR1043v1:~#
i go in winscp open passwd file and set my username save that go in telnet use username to set passwd set restart samba and go in ip link enter user and pass i set says wrong but some times says that sda1 is not avaible
seems like i dont know to save password why that what i miss
another thing i notice after restart service samba in ip shows sda1 sda2 and folder with user name is that ok
i addeded username via scp in file password than go on 6 set password for user and 7 after that sda1 shows but password dont work
In looking at the documentation, luci-app-samba was released in OpenWRT version 19.07.0.
Your version 18.06 of OpenWRT is no longer supported. The oldest version that is still supported is 19.07.8
You might consider upgrading to that.
However, your device only has 32 MB of memory, so running Samba with that limitation will be problematic.
From the wiki article...
On devices with 32Mbyte of RAM you will most likely run into memory issues, adding swap might help but devices with at least 128Mbyte is recommended and a 128-256Mbyte swap if possible.
Since there is overhead with running swap, you may need to purchase a device with more RAM in order to do what you want.