I decided to install OpenWrt on my Linksys ea8300 to use as an AP.
The installation process went great and I had it fully up and running and properly functioning.
The problem when I realized I had Misconfigured my networking settings so that I was going to have issues with the switch I plugged it into.
So I unplugged it and brought it back to my workstation. I first tried bringing up the management interface using the custom IP address I gave it. After several unsuccessful attempts, I decided it would be faster to reset it so I use the reset button on the back to do so.
Now I can't get access to it at all. I tried the debricking method on the wiki page (https://openwrt.org/toh/linksys/ea8300#linksys_ea8300). I tried accessing it using the custom IP address I gave it and the default IP address but I am not getting anywhere.
I noticed the strange behavior from it that after I turn it on, all four of the port lights will flash momentarily and then after a while the WPS light flashes and then everything goes dark.
Did I just brick the router?
Thanks in advance