Hello,
I have upgraded 2days ago my Linksys EA8300 from 19.7 to 21.02. Everything works as before except, it seems to use only cpu0 when performing traffic, whereas cpu0 and cpu1 before.
Cpu usage 19.7 on the left, 21.02 on the right:
Even if I dont see any problems, I wanted to know if it could be an issue on openwrt?
And can changing /etc/config/network could improve it? Sorry I am still pretty new in VLAN Tagging etc
I use it to replace my ISP router which has the internet into VLAN 832.
Here's my network config (with credentials redacted):
config interface 'loopback'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
option device 'lo'
config globals 'globals'
config interface 'lan'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option delegate '0'
option ip6assign '64'
option device 'br-lan'
config interface 'wan'
option proto 'dhcp'
option broadcast '1'
option vendorid 'sagem'
option reqopts '1 15 28 51 58 59 90'
option sendopts '77:<redacted>'
list dns '1.1.1.1'
list dns '1.0.0.1'
option peerdns '0'
option device 'eth1.832'
config interface 'wan6'
option proto 'dhcpv6'
option reqprefix 'auto'
option reqaddress 'none'
option defaultreqopts '0'
option sendopts '11:<redacted>15:FSVDSL_livebox.Internet.softathome.livebox3<redacted>'
option reqopts '11 17 23 24'
option noclientfqdn '1'
option noacceptreconfig '1'
list dns '2606:4700:4700::1111'
list dns '2606:4700:4700::1001'
option peerdns '0'
option device 'eth1.832'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '1 2 3 4 0'
config switch_vlan
option device 'switch0'
option vlan '101'
option vid '832'
option ports '0t 5t'
config device
option name 'br-lan'
option type 'bridge'
list ports 'eth0'
option mtu '1500'