And.....
dmesg
[ 0.000000] Linux version 5.4.80 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15104-451c1eb8c2)) #0 SMP Sun Nov 29 01:12:36 2020
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] printk: bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Linksys EA7300 v1
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] Normal zone: 576 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344
[ 0.000000] pcpu-alloc: s26768 r8192 d22384 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Writing ErrCtl register=00016010
[ 0.000000] Readback ErrCtl register=00016010
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 250404K/262144K available (5946K kernel code, 210K rwdata, 1276K rodata, 1260K init, 238K bss, 11740K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 256
[ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0
[ 0.000000] CPU Clock: 880MHz
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007803] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
[ 0.041999] pid_max: default: 32768 minimum: 301
[ 0.046772] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.053997] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.064402] rcu: Hierarchical SRCU implementation.
[ 0.069841] smp: Bringing up secondary CPUs ...
[ 9.117080] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 9.117091] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 9.117104] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 9.117204] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.102600] Synchronize counters for CPU 1: done.
[ 9.178377] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 9.178385] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 9.178392] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 9.178452] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.167300] Synchronize counters for CPU 2: done.
[ 9.239755] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 9.239762] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 9.239771] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 9.239834] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.225163] Synchronize counters for CPU 3: done.
[ 0.255036] smp: Brought up 1 node, 4 CPUs
[ 0.263620] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.273309] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.280380] pinctrl core: initialized pinctrl subsystem
[ 0.287268] NET: Registered protocol family 16
[ 0.302770] FPU Affinity set after 4688 emulations
[ 0.318449] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.329677] clocksource: Switched to clocksource GIC
[ 0.336270] NET: Registered protocol family 2
[ 0.341958] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.350304] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.357909] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.364992] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.371413] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.377899] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.385107] NET: Registered protocol family 1
[ 0.389428] PCI: CLS 0 bytes, default 32
[ 0.481640] 4 CPUs re-calibrate udelay(lpj = 1163264)
[ 0.487738] random: fast init done
[ 0.490865] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.509303] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.515093] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.526580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.535786] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.541664] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.547496] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 0.553839] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.563846] printk: console [ttyS0] disabled
[ 0.568150] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[ 0.577133] printk: console [ttyS0] enabled
[ 0.585391] printk: bootconsole [early0] disabled
[ 0.597103] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
[ 0.604671] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 0.611014] nand: Macronix MX30LF1G18AC
[ 0.614849] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.622406] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
[ 0.628950] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[ 0.636249] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
[ 0.643543] Scanning device for bad blocks
[ 1.138208] Bad eraseblock 387 at 0x000003060000
[ 1.219415] Bad eraseblock 448 at 0x000003800000
[ 1.951968] 11 fixed-partitions partitions found on MTD device mt7621-nand
[ 1.958831] Creating 11 MTD partitions on "mt7621-nand":
[ 1.964141] 0x000000000000-0x000000080000 : "boot"
[ 1.970465] 0x000000080000-0x0000000c0000 : "u_env"
[ 1.976632] 0x0000000c0000-0x000000100000 : "factory"
[ 1.983099] 0x000000100000-0x000000140000 : "s_env"
[ 1.989216] 0x000000140000-0x000000180000 : "devinfo"
[ 1.995656] 0x000000180000-0x000000580000 : "kernel"
[ 2.001979] 0x000000580000-0x000002980000 : "ubi"
[ 2.008257] 0x000002980000-0x000002d80000 : "alt_kernel"
[ 2.014940] 0x000002d80000-0x000005180000 : "alt_rootfs"
[ 2.021976] 0x000005180000-0x000005280000 : "sysdiag"
[ 2.028320] 0x000005280000-0x000007f80000 : "syscfg"
[ 2.036315] libphy: Fixed MDIO Bus: probed
[ 2.068056] libphy: mdio: probed
[ 2.071581] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[ 2.080018] mtk_soc_eth 1e100000.ethernet: generated random MAC address 6e:45:04:57:60:2b
[ 2.089150] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 2.099566] mt7621-pci 1e140000.pcie: Parsing DT failed
[ 2.107571] NET: Registered protocol family 10
[ 2.113795] Segment Routing with IPv6
[ 2.117553] NET: Registered protocol family 17
[ 2.122079] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.135258] 8021q: 802.1Q VLAN Support v1.8
[ 2.141338] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[ 2.157568] libphy: dsa slave smi: probed
[ 2.162059] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
[ 2.171689] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
[ 2.181412] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
[ 2.191097] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
[ 2.200789] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
[ 2.210650] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[ 2.221889] DSA: tree 0 setup
[ 2.225153] rt2880-pinmux pinctrl: pcie is already enabled
[ 2.230653] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
[ 2.238264] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[ 2.245851] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[ 2.353065] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[ 2.358648] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[ 2.463968] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[ 2.470923] mt7621-pci 1e140000.pcie: PCIE0 enabled
[ 2.475800] mt7621-pci 1e140000.pcie: PCIE1 enabled
[ 2.480678] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[ 2.490131] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[ 2.496493] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
[ 2.503358] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 2.510227] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.515749] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 2.521782] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.528050] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
[ 2.534380] pci 0000:00:00.0: supports D1
[ 2.538394] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.544509] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 2.550551] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 2.556827] pci 0000:00:01.0: reg 0x14: [mem 0x60210000-0x6021ffff]
[ 2.563145] pci 0000:00:01.0: supports D1
[ 2.567158] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 2.574407] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
[ 2.580463] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 2.587403] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 2.602480] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.607712] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
[ 2.613799] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.620586] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.627385] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
[ 2.633440] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 2.640379] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 2.655398] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[ 2.660637] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff]
[ 2.666725] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
[ 2.673509] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 2.680172] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 2.686788] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.693745] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.700353] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.707308] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.714093] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[ 2.720877] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[ 2.727662] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
[ 2.734449] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
[ 2.741234] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff]
[ 2.748024] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[ 2.755335] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.760303] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff]
[ 2.767083] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.773876] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[ 2.781185] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.786149] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff]
[ 2.792931] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
[ 2.800247] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
[ 2.801343] UBI: auto-attach mtd6
[ 2.810507] ubi0: attaching mtd6
[ 3.179927] ubi0: scanning is finished
[ 3.199984] ubi0: attached mtd6 (name "ubi", size 36 MiB)
[ 3.205411] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.212274] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.219045] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.225989] ubi0: good PEBs: 288, bad PEBs: 0, corrupted PEBs: 0
[ 3.231978] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.239184] ubi0: max/mean erase counter: 5/1, WL threshold: 4096, image sequence number: 1606612356
[ 3.248288] ubi0: available PEBs: 0, total reserved PEBs: 288, PEBs reserved for bad PEB handling: 20
[ 3.257501] ubi0: background thread "ubi_bgt0d" started, PID 502
[ 3.259447] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.268982] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.275937] hctosys: unable to open rtc device (rtc0)
[ 3.287086] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.298547] Freeing unused kernel memory: 1260K
[ 3.303108] This architecture does not have kernel memory protection.
[ 3.309532] Run /sbin/init as init process
[ 3.856930] init: Console is alive
[ 3.860587] init: - watchdog -
[ 4.629254] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.723416] usbcore: registered new interface driver usbfs
[ 4.729002] usbcore: registered new interface driver hub
[ 4.734468] usbcore: registered new device driver usb
[ 4.749403] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
[ 4.758191] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[ 4.767170] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 4.772510] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 4.785854] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 4.795072] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 4.802116] hub 1-0:1.0: USB hub found
[ 4.806002] hub 1-0:1.0: 2 ports detected
[ 4.810623] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 4.816001] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 4.823494] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 4.830062] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.839021] hub 2-0:1.0: USB hub found
[ 4.842885] hub 2-0:1.0: 1 port detected
[ 4.853084] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.862023] init: - preinit -
[ 5.454243] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[ 5.462568] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 5.471049] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.640140] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.702823] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.922027] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.233222] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 6.240260] 8021q: adding VLAN 0 to HW filter on device lan1
[ 8.290174] mt7530 mdio-bus:1f lan1: Link is Up - 100Mbps/Full - flow control off
[ 8.297743] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[ 10.427700] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 10.433667] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 653
[ 10.515120] UBIFS (ubi0:1): recovery needed
[ 10.739038] UBIFS (ubi0:1): recovery completed
[ 10.743625] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 10.751444] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 10.761337] UBIFS (ubi0:1): FS size: 28823552 bytes (27 MiB, 227 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 10.771749] UBIFS (ubi0:1): reserved for root: 1361407 bytes (1329 KiB)
[ 10.778360] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID E94ADA93-891D-4DC5-8523-D0D0838A447D, small LPT model
[ 10.806570] mount_root: loading kmods from internal overlay
[ 11.100159] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 11.555439] SCSI subsystem initialized
[ 11.583647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.590942] ohci-platform: OHCI generic platform driver
[ 11.598288] ohci-pci: OHCI PCI platform driver
[ 11.619702] usbcore: registered new interface driver usb-storage
[ 11.631140] usbcore: registered new interface driver uas
[ 11.636791] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 11.951501] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 11.964873] block: extroot: not configured
[ 11.972772] mount_root: switching to ubifs overlay
[ 11.993005] urandom-seed: Seeding with /etc/urandom.seed
[ 12.054282] mt7530 mdio-bus:1f lan1: Link is Down
[ 12.076452] procd: - early -
[ 12.079517] procd: - watchdog -
[ 12.689831] procd: - watchdog -
[ 12.693273] procd: - ubus -
[ 12.804796] procd: - init -
[ 13.508588] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.635376] urngd: v1.0.2 started.
[ 13.702857] Key type cifs.idmap registered
[ 13.747017] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 13.780146] random: crng init done
[ 13.783604] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.805817] fuse: init (API version 7.31)
[ 13.815392] Loading modules backported from Linux version v5.8-0-gbcf876870b95
[ 13.822634] Backport generated by backports.git v5.8-1-0-g79400d9e
[ 13.864590] usbcore: registered new interface driver ums-alauda
[ 13.871855] usbcore: registered new interface driver ums-cypress
[ 13.879205] usbcore: registered new interface driver ums-datafab
[ 13.886489] usbcore: registered new interface driver ums-freecom
[ 13.893877] usbcore: registered new interface driver ums-isd200
[ 13.901147] usbcore: registered new interface driver ums-jumpshot
[ 13.908508] usbcore: registered new interface driver ums-karma
[ 13.917327] usbcore: registered new interface driver ums-sddr09
[ 13.924657] usbcore: registered new interface driver ums-sddr55
[ 13.932071] usbcore: registered new interface driver ums-usbat
[ 13.945950] xt_time: kernel timezone is -0000
[ 14.005589] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
[ 14.011060] pci 0000:00:00.0: enabling device (0006 -> 0007)
[ 14.016726] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
[ 14.035041] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.039694] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24
[ 14.045232] pci 0000:00:01.0: enabling device (0006 -> 0007)
[ 14.050686] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[ 14.050686]
[ 14.050970] mt7615e 0000:02:00.0: enabling device (0000 -> 0002)
[ 14.082720] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 14.104138] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[ 14.104138]
[ 14.129917] PPP generic driver version 2.4.2
[ 14.137484] NET: Registered protocol family 24
[ 14.159393] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.373197] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[ 14.373264] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[ 14.435707] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
[ 14.444460] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
[ 20.647073] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[ 20.654335] mtk_soc_eth 1e100000.ethernet: PPE table busy
[ 20.677795] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[ 20.686089] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.694788] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.702482] device eth0 entered promiscuous mode
[ 20.707715] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 20.715306] 8021q: adding VLAN 0 to HW filter on device lan1
[ 20.724597] br-lan: port 1(lan1) entered blocking state
[ 20.729896] br-lan: port 1(lan1) entered disabled state
[ 20.736329] device lan1 entered promiscuous mode
[ 20.763901] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 20.771637] 8021q: adding VLAN 0 to HW filter on device lan2
[ 20.781039] br-lan: port 2(lan2) entered blocking state
[ 20.786406] br-lan: port 2(lan2) entered disabled state
[ 20.793811] device lan2 entered promiscuous mode
[ 20.808789] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 20.816275] 8021q: adding VLAN 0 to HW filter on device lan3
[ 20.825446] br-lan: port 3(lan3) entered blocking state
[ 20.830852] br-lan: port 3(lan3) entered disabled state
[ 20.838760] device lan3 entered promiscuous mode
[ 20.852663] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 20.860080] 8021q: adding VLAN 0 to HW filter on device lan4
[ 20.870600] br-lan: port 4(lan4) entered blocking state
[ 20.875972] br-lan: port 4(lan4) entered disabled state
[ 20.883428] device lan4 entered promiscuous mode
[ 20.910275] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
[ 20.918380] 8021q: adding VLAN 0 to HW filter on device wan
[ 22.754288] mt7530 mdio-bus:1f lan1: Link is Up - 100Mbps/Full - flow control off
[ 22.818249] mt7530 mdio-bus:1f lan2: Link is Up - 100Mbps/Full - flow control rx/tx
[ 22.914332] mt7530 mdio-bus:1f lan4: Link is Up - 100Mbps/Full - flow control rx/tx
[ 23.655421] br-lan: port 5(wlan0) entered blocking state
[ 23.660807] br-lan: port 5(wlan0) entered disabled state
[ 23.666897] device wlan0 entered promiscuous mode
[ 23.672071] br-lan: port 5(wlan0) entered blocking state
[ 23.677487] br-lan: port 5(wlan0) entered forwarding state
[ 23.684585] br-lan: port 1(lan1) entered blocking state
[ 23.689929] br-lan: port 1(lan1) entered forwarding state
[ 23.696053] br-lan: port 2(lan2) entered blocking state
[ 23.701344] br-lan: port 2(lan2) entered forwarding state
[ 23.707624] br-lan: port 5(wlan0) entered disabled state
[ 23.713706] br-lan: port 4(lan4) entered blocking state
[ 23.719003] br-lan: port 4(lan4) entered forwarding state
[ 23.725263] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 24.762192] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.768909] br-lan: port 5(wlan0) entered blocking state
[ 24.774273] br-lan: port 5(wlan0) entered forwarding state
[ 24.900723] mt7530 mdio-bus:1f lan3: Link is Up - 1Gbps/Full - flow control rx/tx
[ 25.026302] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control off
[ 26.075023] br-lan: port 6(wlan1) entered blocking state
[ 26.080397] br-lan: port 6(wlan1) entered disabled state
[ 26.086484] device wlan1 entered promiscuous mode
[ 26.091730] br-lan: port 6(wlan1) entered blocking state
[ 26.097167] br-lan: port 6(wlan1) entered forwarding state
[ 26.103578] br-lan: port 3(lan3) entered blocking state
[ 26.108919] br-lan: port 3(lan3) entered forwarding state
[ 26.115101] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[ 26.123469] br-lan: port 6(wlan1) entered disabled state
[ 27.184385] pppoe-wan: renamed from ppp0
[ 28.549242] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 28.555955] br-lan: port 6(wlan1) entered blocking state
[ 28.561343] br-lan: port 6(wlan1) entered forwarding state
[ 53.241768] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-mtk
[ 53.271765] scsi host0: uas
[ 53.276318] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 4
[ 53.284758] xhci-mtk 1e1c0000.xhci: @000000000f1f3300 0e8db000 00000000 05000000 01058001
[ 53.292902] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 6
[ 53.301313] xhci-mtk 1e1c0000.xhci: @000000000f1f3310 0e8db100 00000000 05000000 01078001
[ 74.029760] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 74.037330] scsi 0:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[ 74.043636] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[ 74.053435] xhci-mtk 1e1c0000.xhci: ep deq seg = 93f90f6a, deq ptr = 2ad62379
[ 74.069797] scsi host0: uas_eh_device_reset_handler start
[ 74.075467] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[ 74.085270] xhci-mtk 1e1c0000.xhci: ep deq seg = 5665094e, deq ptr = 6569a1f4
[ 74.218127] usb 2-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-mtk
[ 74.243711] scsi host0: uas_eh_device_reset_handler success
[ 74.249877] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 4
[ 74.258301] xhci-mtk 1e1c0000.xhci: @000000000f1f3480 0e8db200 00000000 05000000 01058001
[ 74.269793] scsi 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[ 74.277090] scsi 0:0:0:0: tag#0 CDB: opcode=0x0 00 00 00 00 00 00
[ 74.283320] scsi host0: uas_eh_device_reset_handler start
[ 74.288821] xhci-mtk 1e1c0000.xhci: Mismatch between completed Set TR Deq Ptr command & xHCI internal state.
[ 74.298621] xhci-mtk 1e1c0000.xhci: ep deq seg = 008a7312, deq ptr = 270b0e69
[ 74.434114] usb 2-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-mtk
[ 74.459741] scsi host0: uas_eh_device_reset_handler success
[ 74.465362] scsi 0:0:0:0: Device offlined - not ready after error recovery