Linksys EA6350 v3

I have a Linksys EA6350 v3, and i have flashed it in the past. But i went to pull it out and use it as a repeater, but i could not get connected to the webgui. Below is the version i can get from the SSH. All the how-to's have me downloading the image from the internet to the device, but the device IP is setup to my present router. So any idea to help it would be great.

I am pretty advanced in programing with instructions but i am stuck trying to update it.

OpenWrt 19.07.2, r10947-65030d81f3


since you have SSH access, it should be no problem to upgrade to the latest stable release:

You can just transfer the sysupgrade image with SCP to your router:
scp openwrt-23.05.3-ipq40xx-generic-linksys_ea6350v3-squashfs-sysupgrade.bin root@

Then SSH into your router and upgrade with:
sysupgrade -n /tmp/openwrt-23.05.3-ipq40xx-generic-linksys_ea6350v3-squashfs-sysupgrade.bin

The -n option being, do not keep the existing configuration.

check the wiki page closely before upgrading to 23.05:
Seems you need to set fw_setenv kernsize 500000 before updating.

You mentioned overlapping IP ranges?
You can change away from default in luci/network/interfaces/lan with a single isolated computer connected to something non-conflicting with current network.