LEDs on FritzBox 7362SL

Hi!
I installed OpenWRT on my 7362SL a few days ago, and now i am playing with "Led Configuration". On the list I see:
image
I don't know what is ath9k-phy0 and where is Fon LED.


TomekYeet

ath9k-phy0 = wifi interface

1 Like

Fon LED

for you it must flash for what reason ?

for example if there is lan or wan or wifi traffic or something else?


i have still green power and blinking green wlan

and what can you do?
all on / all off / based on traffic / other ?

exactly. I just want to use Fon LED as any other (eg. info)

what version of openwrt did you upload?

Can you post the output of the command:

find /sys/class/leds/*

my config

add led should help you

OpenWrt 22.03.5

root@OpenWrt:~# find /sys/class/leds/*
/sys/class/leds/ath9k-phy0
/sys/class/leds/green:dect
/sys/class/leds/green:info
/sys/class/leds/green:power
/sys/class/leds/green:wlan
/sys/class/leds/red:info
/sys/class/leds/red:power


i want this LED to light up

maybe i'm wrong, it should be like this:

/sys/class/leds/green:dect

try running this command:

echo 1 >  /sys/class/leds/green:dect/brightness

if it doesn't turn on try the command on the others and you will see that you find it (one at a time) to turn it off echo 0

dect is the third one from left

edit: dect is wlan phone and Fon is RJ11 phone

i have seen the picture and i have also seen the hardware chart of your fixture and it says "LED count 5" so i am assuming there is some way to turn it on.

unless it's a led linked only to the phone, and then you should contact the maintainer of your device and ask him (or try with the commands I gave you)

this should turn all the leds green

echo 1 > /sys/class/leds/ath9k-phy0/brightness
echo 1 > /sys/class/leds/green:dect/brightness
echo 1 > /sys/class/leds/green:info/brightness
echo 1 > /sys/class/leds/green:power/brightness
echo 1 > /sys/class/leds/green:wlan/brightness


Fon is still off

then you should contact the maintainer of your device and ask him

I assume it refers to the

"and telephony support (the latter not supported by OpenWrt)"

I'm sorry I can't be of more help to you

ok, thanks! if i contact avm i will update this post

not avm

but openwrt maintainer

ah, yes i misread maintainer as manufacturer