LEDE reboot interface

Hello friends,
I have a problem, I have a WR940N v2 / WR941ND v5 router.
After installing lede constantly connects and disconnects the network interface and I do not know how to solve that.

Can somebody help me?

SSH in to the router and run the following...

cat /etc/config/network

This method solve infinite loop?

Nope. It gives some information on which we can base our sugestions.
And while you are doing "cat /etc.." you might also do:

logread | tail -n 30

And give us the result of both commands here.

But since this could help me, remember that the router connects and disconnects constantly :frowning:

Do you mean that it disconects so fast that you cant login?
That most probably means you have used wrong image and have bricked your routers.

1 Like

Thanks For Answering Yasen.
Once the image is finished flashing, my pc connects and disconnects indefinitely from the router.
Then I'm assuming it's the router.
The image I use is the following: lede-17.01.4-ar71xx-generic-tl-wr941nd-v5-squashfs-factory.bin

This the version of my router firmware


Try with other PC or laptop with with ethernet port and another lan cable. If the problem stays the same, you probably need to learn about usbTTL and serial console.

To be honest at the time I saw a tutorial on YouTube, and I think I installed openwrt version 12.09 and everything is perfect when the version is higher than 12.09 has these problems