# LEDE Image builder Problem **URL:** \ **Category:** For Developers\ **Created:** [May 12, 2017, 9:54am UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680 "2017-05-12T09:54:32Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![amanjuman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/amanjuman/32/3501_2.png) [@amanjuman](https://forum.openwrt.org/u/amanjuman)\ **Post date:** [May 12, 2017, 9:54am UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/1 "2017-05-12T09:54:32Z")
Today I tried to build few images. Last time I tried to build an image for bcm-2710. So my command was `sudo make image PROFILE=rpi-3` I got error like same with other architects ``` Activating init scripts Building images... Creating filesystem with parameters: Size: 268435456 Block size: 4096 Blocks per group: 32768 Inodes per group: 8192 Inode size: 256 Journal blocks: 0 Label: Blocks: 65536 Block groups: 2 Reserved blocks: 0 Reserved block group size: 15 Created filesystem with 821/16384 inodes and 3244/65536 blocks mkfs.fat 4.1 (2017-01-24) /home/ubuntu/lede-imagebuilder-brcm2708-bcm2710.Linux-x86_64/build_dir/target-aarch64_cortex-a53+neon-vfpv4_musl/linux-brcm2708_bcm2710/linux-4.9.20/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dtb: No such file or directory Makefile:82: recipe for target '/home/ubuntu/lede-imagebuilder-brcm2708-bcm2710.Linux-x86_64/build_dir/target-aarch64_cortex-a53+neon-vfpv4_musl/linux-brcm2708_bcm2710/tmp/lede-brcm2708-bcm2710-rpi-3-ext4-sdcard.img' failed make[3]: *** [/home/ubuntu/lede-imagebuilder-brcm2708-bcm2710.Linux-x86_64/build_dir/target-aarch64_cortex-a53+neon-vfpv4_musl/linux-brcm2708_bcm2710/tmp/lede-brcm2708-bcm2710-rpi-3-ext4-sdcard.img] Error 1 Makefile:168: recipe for target 'build_image' failed make[2]: *** [build_image] Error 2 Makefile:109: recipe for target '_call_image' failed make[1]: *** [_call_image] Error 2 Makefile:195: recipe for target 'image' failed make: *** [image] Error 2 ``` was same problem during build image for ARXX. What will be the solution? ---
**Author:** ![stangri](https://forum.openwrt.org/user_avatar/forum.openwrt.org/stangri/32/58_2.png) [@stangri](https://forum.openwrt.org/u/stangri)\ **Post date:** [May 12, 2017, 10:47am UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/2 "2017-05-12T10:47:09Z")
Probably not the reason for your problems, but I run make from a regular user (not a super-user) and it runs fine. I'd delete current IB directory, re-download and extract image builder as a regular user and try to run make from the regular user, without sudo. ---
**Author:** ![amanjuman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/amanjuman/32/3501_2.png) [@amanjuman](https://forum.openwrt.org/u/amanjuman)\ **Post date:** [May 12, 2017, 12:07pm UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/3 "2017-05-12T12:07:17Z")
I tried with `sudo su` same problem then I tried without super user access. I think this is not the problem, as you saw problems in last lines. ---
**Author:** ![Bartvz](https://forum.openwrt.org/user_avatar/forum.openwrt.org/bartvz/32/787_2.png) [@Bartvz](https://forum.openwrt.org/u/Bartvz)\ **Post date:** [May 12, 2017, 1:06pm UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/4 "2017-05-12T13:06:49Z")
Looks like a missing file: > /home/ubuntu/lede-imagebuilder-brcm2708-bcm2710.Linux-x86\_64/build\_dir/target-aarch64\_cortex-a53+neon-vfpv4\_musl/linux-brcm2708\_bcm2710/linux-4.9.20/arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dtb: No such file or directory Could be that the image builder is missing those files atm but since I don't use it I simply don't know. ---
**Author:** ![amanjuman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/amanjuman/32/3501_2.png) [@amanjuman](https://forum.openwrt.org/u/amanjuman)\ **Post date:** [May 13, 2017, 3:43pm UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/5 "2017-05-13T15:43:15Z")
I manually created that directory, but no luck. ---
**Author:** ![Bartvz](https://forum.openwrt.org/user_avatar/forum.openwrt.org/bartvz/32/787_2.png) [@Bartvz](https://forum.openwrt.org/u/Bartvz)\ **Post date:** [May 14, 2017, 9:47am UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/6 "2017-05-14T09:47:33Z")
dts stands for Device Tree Source files, so unless you have those files you cannot use the image builder. My suggestion is to start from scratch, delete everything and try again. ---
**Author:** ![amanjuman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/amanjuman/32/3501_2.png) [@amanjuman](https://forum.openwrt.org/u/amanjuman)\ **Post date:** [May 14, 2017, 3:56pm UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/7 "2017-05-14T15:56:13Z")
Tried 7 times with 3 different PC ---
**Author:** ![jow](https://forum.openwrt.org/user_avatar/forum.openwrt.org/jow/32/13_2.png) [@jow](https://forum.openwrt.org/u/jow)\ **Post date:** [May 14, 2017, 6:53pm UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/8 "2017-05-14T18:53:57Z")
This is a packaging bug in LEDE. I staged a fix for this in my tree, [https://git.lede-project.org/a915c482](https://git.lede-project.org/a915c482) ---
**Author:** ![Mazilo](https://forum.openwrt.org/letter_avatar/mazilo/32/5_5575768a8748004e209b776fc1b2916d.png) [@Mazilo](https://forum.openwrt.org/u/Mazilo)\ **Post date:** [May 14, 2017, 11:02pm UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/9 "2017-05-14T23:02:48Z")
Same thing here when trying to build LEDE for a Target System (PLXTECH/Oxford NAS782x/OX82x) with Target Profile (Cloud Engines Pogoplug Pro (with mPCIe)), even after a make dirclean. Here is the excerpt to show the error message. `sh /home/local/devel/LEDE-git/scripts/sysupgrade-tar.sh --board pogoplug-pro --kernel /home/local/devel/LEDE-git/build_dir/target-arm_mpcore_musl_eabi/linux-oxnas/pogoplug-pro-uImage --rootfs /home/local/devel/LEDE-git/build_dir/target-arm_mpcore_musl_eabi/linux-oxnas/root.squashfs /home/local/devel/LEDE-git/build_dir/target-arm_mpcore_musl_eabi/linux-oxnas/tmp/lede-oxnas-pogoplug-pro-squashfs-sysupgrade.tar tar: Option --mtime: Treating date '@1494714844' as 2017-05-13 22:34:04 sysupgrade-pogoplug-pro/ sysupgrade-pogoplug-pro/kernel sysupgrade-pogoplug-pro/root tar: sysupgrade.tar: Wrote only 2048 of 10240 bytes tar: Error is not recoverable: exiting now Makefile:107: recipe for target '/home/local/devel/LEDE-git/build_dir/target-arm_mpcore_musl_eabi/linux-oxnas/tmp/lede-oxnas-pogoplug-pro-squashfs-sysupgrade.tar' failed make[4]: *** [/home/local/devel/LEDE-git/build_dir/target-arm_mpcore_musl_eabi/linux-oxnas/tmp/lede-oxnas-pogoplug-pro-squashfs-sysupgrade.tar] Error 2 make[4]: Leaving directory '/home/local/devel/LEDE-git/target/linux/oxnas/image' Makefile:30: recipe for target 'install' failed make[3]: *** [install] Error 2 make[3]: Leaving directory '/home/local/devel/LEDE-git/target/linux/oxnas' Makefile:13: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '/home/local/devel/LEDE-git/target/linux' target/Makefile:23: recipe for target 'target/linux/install' failed make[1]: *** [target/linux/install] Error 2 make[1]: Leaving directory '/home/local/devel/LEDE-git' /home/local/devel/LEDE-git/include/toplevel.mk:206: recipe for target 'target/install' failed make: *** [target/install] Error 2` ---
**Author:** ![jow](https://forum.openwrt.org/user_avatar/forum.openwrt.org/jow/32/13_2.png) [@jow](https://forum.openwrt.org/u/jow)\ **Post date:** [May 15, 2017, 6:52am UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/10 "2017-05-15T06:52:35Z")
This is not the same issue. The original report is about missing DTS files, your issue is ``` tar: sysupgrade.tar: Wrote only 2048 of 10240 bytes tar: Error is not recoverable: exiting now ``` ... which usually indicates a full disk. ---
**Author:** ![Mazilo](https://forum.openwrt.org/letter_avatar/mazilo/32/5_5575768a8748004e209b776fc1b2916d.png) [@Mazilo](https://forum.openwrt.org/u/Mazilo)\ **Post date:** [May 17, 2017, 4:35pm UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/11 "2017-05-17T16:35:32Z")
Jow, Thank you and you are right! I checked my OpenSuSE Linux desktop computer and found it only had about 250 MB root partition. After some housing cleaning, the root partition (where /tmp is) now has about 1/2 GB storage spa ceand the compilation completes sans a problem. BTW, is there away to configure buildroot so that it will use the LEDE buildroot/tmp directory, instead of /tmp directory? Right now, I still have about 15 GB storage space left on my LEDE buildroot directory. ---
**Author:** ![amanjuman](https://forum.openwrt.org/user_avatar/forum.openwrt.org/amanjuman/32/3501_2.png) [@amanjuman](https://forum.openwrt.org/u/amanjuman)\ **Post date:** [May 18, 2017, 11:54am UTC](https://forum.openwrt.org/t/lede-image-builder-problem/3680/12 "2017-05-18T11:54:25Z")
Ayyyy, Seems it fixed. Thanks a lot in my way of custom router firmware. 😃