hi everyone, i have a tplink 8970 working great with lede 17.01.4, but last night i update to 18.06-rc1.
like 17.01.4 i installed the kmod ath9k_htc usb driver but is not working. also going back to lede 17.01.4 was not so easy, flashing from web interface was not possible, so i forced the flash via ssh.
hi, i still cannot make this work in the last openwrt! there is any way to make it work,please?
kmodloader: done loading kernel modules from /etc/modules.d/*
[ 471.450775] usb 2-1: USB disconnect, device number 2
[ 504.929680] usb 1-1: USB disconnect, device number 2
[ 505.409300] usb 1-1: new high-speed USB device number 3 using dwc2
[ 505.644419] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 505.931462] usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 506.183616] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 506.604933] ath: phy3: Mac Chip Rev 0x0f.3 is not supported by this driver
[ 506.610452] ath: phy3: Unable to initialize hardware; initialization status: -122
[ 506.617954] ath: phy3: Unable to initialize hardware; initialization status: -122
[ 506.625426] ath9k_htc: Failed to initialize the device
[ 506.637417] usb 1-1: ath9k_htc: USB layer deinitialized
[ 517.325693] usb 1-1: USB disconnect, device number 3
[ 518.897016] usb 1-1: new high-speed USB device number 4 using dwc2
[ 519.131416] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 519.418798] usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 519.671053] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 520.104710] ath: phy4: Mac Chip Rev 0x0f.3 is not supported by this driver
[ 520.110244] ath: phy4: Unable to initialize hardware; initialization status: -122
[ 520.117736] ath: phy4: Unable to initialize hardware; initialization status: -122
[ 520.125206] ath9k_htc: Failed to initialize the device
[ 520.136961] usb 1-1: ath9k_htc: USB layer deinitialized
[ 529.805835] usb 2-1: new high-speed USB device number 3 using dwc2
[ 581.791734] usb 2-1: USB disconnect, device number 3
[ 585.511464] usb 1-1: USB disconnect, device number 4
[ 587.587216] usb 2-1: new high-speed USB device number 4 using dwc2
[ 587.822779] usb 2-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 588.111384] usb 2-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 588.363605] ath9k_htc 2-1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 588.795102] ath: phy5: Mac Chip Rev 0x0f.3 is not supported by this driver