KuWfi OpenWrt 300Mbps 4G LTE

Installing and Using OpenWrt
1

Hi,

I have one router with OpenWrt OpenWrt Chaos Calmer 15.05.1 r20 / LuCI (svn-r3) and I want update it to the new 18.06 release but i can´t find my router right firmware.

Maybe the is another router brand with compatible OpenWrt firmware.

This is my OpenWrt router:

Details:

Chipset Qualcomm : MDM9X07//9X15/9X25/9600/9200,MTK6375

QCA9531 ,2.4G, 802.11b/g/n
Interface: 1 *10/100Mbps WAN Port

4 *10/100Mbps LAN Port

1 USB 2.0 port
Data rate 300Mbps
Antennas 4 5dBi external antenna
high power 1000mW
Support SAMBA, FTP server and DLNA, it is a wireless router can sharing files
Support wireless AP, WiFi Router multi operation mode to meet with different requirement.
Support PPPOE, static IP, dynamic IP in gateway operation mode
Security 64/128-bit WEP;128bit WPA (TKIP/AES)
SIZE 15411029mm
Weight 572g

Thank´s for your Help.

2

It appears that the OpenWrt build you have installed is built by manufacturer. Your best bet would be to ask them if they have updated it.

If not, then at least they could provide the source.

3

it seems like you have a unielec router

i've got one of this in my hands , it has a different serial connector /debug /uart ttl , and when i connect my usb adapter it lock the boot process .....

it has another bootloader (i don't remember the name)

if you contact the seller on aliexpress or on their site they are very available , for another model i have they supply their source code and the bootloader bin too