Nice work tmn505 the wrt32x is working now on kernel 4.19.
wrt32x boot log:
```[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.42 (jeff@jeff-pc) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10013-9e3a833283)) #0 SMP Wed May 15 21:59:32 2019
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WRT32X
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4cc with crng_init=0
[ 0.000000] percpu: Embedded 12 pages/cpu s19212 r8192 d21748 u49152
[ 0.000000] pcpu-alloc: s19212 r8192 d21748 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock8
[ 0.000000] Bootloader command line (ignored): console= root=/dev/mtdblock8
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 509940K/524288K available (6144K kernel code, 192K rwdata, 1472K rodata, 1024K init, 228K bss, 14348K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (7136 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 193 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 229 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000006] sched_clock: 64 bits at 933MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000014] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1ae5b571769, max_idle_ns: 881590513431 ns
[ 0.000025] Switching to timer-based delay loop, resolution 1ns
[ 0.000123] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000130] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.00 BogoMIPS (lpj=9330000)
[ 0.000249] pid_max: default: 32768 minimum: 301
[ 0.000299] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000304] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000499] CPU: Testing write buffer coherency: ok
[ 0.000509] CPU0: Spectre v2: using BPIALL workaround
[ 0.000603] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.000736] Setting up static identity map for 0x100000 - 0x100060
[ 0.000796] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.000859] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.000897] rcu: Hierarchical SRCU implementation.
[ 0.001055] smp: Bringing up secondary CPUs ...
[ 0.001156] Booting CPU 1
[ 0.001295] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.001297] CPU1: Spectre v2: using BPIALL workaround
[ 0.001339] smp: Brought up 1 node, 2 CPUs
[ 0.001343] SMP: Total of 2 processors activated (3732.00 BogoMIPS).
[ 0.001345] CPU: All CPU(s) started in SVC mode.
[ 0.002619] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.002664] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.002671] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.002717] pinctrl core: initialized pinctrl subsystem
[ 0.002950] NET: Registered protocol family 16
[ 0.003369] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.003949] cpuidle: using governor ladder
[ 0.004067] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.004073] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.009230] cryptd: max_cpu_qlen set to 1000
[ 0.009579] SCSI subsystem initialized
[ 0.009664] libata version 3.00 loaded.
[ 0.009754] usbcore: registered new interface driver usbfs
[ 0.009780] usbcore: registered new interface driver hub
[ 0.009806] usbcore: registered new device driver usb
[ 0.010359] clocksource: Switched to clocksource arm_global_timer
[ 0.010707] NET: Registered protocol family 2
[ 0.010904] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.010915] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.010934] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010961] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.010993] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.011006] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.011072] NET: Registered protocol family 1
[ 0.011084] PCI: CLS 0 bytes, default 64
[ 0.011832] Crashlog allocated RAM at address 0x3f00000
[ 0.011916] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.013493] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.013502] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.014581] io scheduler noop registered
[ 0.014587] io scheduler deadline registered (default)
[ 0.015089] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.015939] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.015949] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.015954] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.015958] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 0.016019] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.016125] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.016810] PCI: bus0: Fast back to back transfers disabled
[ 0.016817] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.016822] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.016868] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.016889] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[ 0.016898] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[ 0.016957] pci 0000:01:00.0: supports D1 D2
[ 0.016960] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.017677] PCI: bus1: Fast back to back transfers disabled
[ 0.017683] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.017733] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.017761] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[ 0.017772] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[ 0.017853] pci 0000:02:00.0: supports D1 D2
[ 0.017856] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.017874] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:02.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.018585] PCI: bus2: Fast back to back transfers disabled
[ 0.018591] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.018612] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[ 0.018617] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[ 0.018623] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.018632] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.018640] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.018645] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
[ 0.018651] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.018661] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[ 0.018669] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.018673] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
[ 0.018876] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.060701] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.060809] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.120653] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.120803] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.121051] console [ttyS0] disabled
[ 0.141116] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
[ 0.882713] console [ttyS0] enabled
[ 0.887540] loop: module loaded
[ 0.890958] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.900047] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.909190] scsi host0: ahci-mvebu
[ 0.912779] scsi host1: ahci-mvebu
[ 0.916247] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 0.924209] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 0.932699] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 0.939082] nand: AMD/Spansion S34ML02G2
[ 0.943032] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 0.950920] Bad block table found at page 131008, version 0x01
[ 0.957108] Bad block table found at page 130944, version 0x01
[ 0.963230] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 0.970308] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 0.975827] 0x000000000000-0x000000200000 : "u-boot"
[ 0.981035] 0x000000200000-0x000000220000 : "u_env"
[ 0.986098] 0x000000220000-0x000000260000 : "s_env"
[ 0.991166] 0x000000260000-0x000000820000 : "unused_area"
[ 0.996774] 0x0000007e0000-0x000000820000 : "devinfo"
[ 1.002033] 0x000000900000-0x000008400000 : "kernel1"
[ 1.007882] 0x000000c00000-0x000008400000 : "rootfs1"
[ 1.013718] 0x000008400000-0x00000ff00000 : "kernel2"
[ 1.019565] 0x000008700000-0x00000ff00000 : "ubi"
[ 1.025057] 0x00000ff00000-0x000010000000 : "BBT"
[ 1.030235] libphy: Fixed MDIO Bus: probed
[ 1.034634] libphy: orion_mdio_bus: probed
[ 1.038885] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.047676] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:c0:b1:a8
[ 1.057017] mvneta f1034000.ethernet eth1: Using hardware mac address 60:38:e0:c0:b1:a8
[ 1.065204] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.071767] ehci-platform: EHCI generic platform driver
[ 1.077069] ehci-orion: EHCI orion driver
[ 1.081176] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.086607] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.094257] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[ 1.120355] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.126488] hub 1-0:1.0: USB hub found
[ 1.130264] hub 1-0:1.0: 1 port detected
[ 1.134587] usbcore: registered new interface driver usb-storage
[ 1.140769] i2c /dev entries driver
[ 1.146740] orion_wdt: Initial timeout 171 sec
[ 1.151497] sdhci: Secure Digital Host Controller Interface driver
[ 1.157703] sdhci: Copyright(c) Pierre Ossman
[ 1.193682] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.201202] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.210342] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.217950] NET: Registered protocol family 10
[ 1.222855] Segment Routing with IPv6
[ 1.226568] NET: Registered protocol family 17
[ 1.231146] 8021q: 802.1Q VLAN Support v1.8
[ 1.235382] Registering SWP/SWPB emulation handler
[ 1.241623] usb_phy_generic usb3_1-phy: Linked as a consumer to regulator.1
[ 1.248760] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.254121] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.261710] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.266553] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.271002] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[ 1.276430] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.282473] hub 2-0:1.0: USB hub found
[ 1.291409] hub 2-0:1.0: 1 port detected
[ 1.295459] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.300812] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.308335] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.314840] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.323137] hub 3-0:1.0: USB hub found
[ 1.326922] hub 3-0:1.0: 1 port detected
[ 1.331219] UBI: auto-attach mtd8
[ 1.334550] ubi0: attaching mtd8
[ 1.382700] random: fast init done
[ 1.387111] mmc0: new high speed SDIO card at address 0001
[ 2.119606] ubi0: scanning is finished
[ 2.127838] ubi0: attached mtd8 (name "ubi", size 120 MiB)
[ 2.133353] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.140258] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.147078] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.154074] ubi0: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0
[ 2.160105] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.167363] ubi0: max/mean erase counter: 22/15, WL threshold: 4096, image sequence number: 1997026322
[ 2.176713] ubi0: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 40
[ 2.185980] ubi0: background thread "ubi_bgt0d" started, PID 716
[ 2.186355] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.197529] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 2.204699] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mii:10
[ 2.211524] mvsw61xx 10.mvsw61xx: Using direct addressing
[ 2.224828] hctosys: unable to open rtc device (rtc0)
[ 2.231985] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.239635] Freeing unused kernel memory: 1024K
[ 2.270444] Run /sbin/init as init process
[ 2.413553] init: Console is alive
[ 2.417025] init: - watchdog -
[ 2.671354] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.694393] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.701950] init: - preinit -
[ 2.835829] mvneta f1070000.ethernet tmp0: renamed from eth0
[ 2.841761] random: procd: uninitialized urandom read (4 bytes read)
[ 2.891607] mvneta f1034000.ethernet eth0: renamed from eth1
[ 2.931525] mvneta f1070000.ethernet eth1: renamed from tmp0
[ 3.184376] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.216424] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.363870] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 3.371606] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.377633] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 3.385755] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.455680] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 826
[ 6.638050] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.645923] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.655890] UBIFS (ubi0:1): FS size: 109834240 bytes (104 MiB, 865 LEBs), journal size 5459968 bytes (5 MiB, 43 LEBs)
[ 6.666550] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 6.673197] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 25787AAB-3313-4A5A-B3FE-68825813622E, small LPT model
[ 6.685246] mount_root: overlay filesystem has not been fully initialized yet
[ 6.692733] mount_root: switching to ubifs overlay
[ 6.701333] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
[ 6.794999] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 6.827267] mvneta f1034000.ethernet eth0: Link is Down
[ 6.891988] procd: - early -
[ 6.894901] procd: - watchdog -
[ 7.502616] procd: - watchdog -
[ 7.505848] procd: - ubus -
[ 7.523666] urandom_read: 3 callbacks suppressed
[ 7.523668] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.558139] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.564602] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.571168] procd: - init -
[ 7.662857] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.671211] tun: Universal TUN/TAP device driver, 1.6
[ 7.677446] l2tp_core: L2TP core driver, V2.0
[ 7.682128] l2tp_netlink: L2TP netlink interface
[ 7.687047] gre: GRE over IPv4 demultiplexor driver
[ 7.692441] ip_gre: GRE over IPv4 tunneling driver
[ 7.701106] Loading modules backported from Linux version v4.19.32-0-g3a2156c839c7
[ 7.708716] Backport generated by backports.git v4.19.32-1-0-g1c4f7569
[ 7.726270] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181210>>
[ 7.734371] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 7.740173] ieee80211 phy0: priv->pcmd_buf = (ptrval) priv->pphys_cmd_buf = (ptrval)
[ 7.800383] ieee80211 phy0: fw download start
[ 7.800388] ieee80211 phy0: ddr init: download start
[ 7.800767] ieee80211 phy0: ddr init: download complete
[ 7.939126] ieee80211 phy0: FwSize = 450732 downloaded Size = 450732 curr_iteration 65521
[ 10.806352] ieee80211 phy0: fw download complete
[ 10.806387] ieee80211 phy0: device node: pcie@1,0
[ 10.821241] ieee80211 phy0: pcmd = (ptrval)
[ 10.839283] ieee80211 phy0: firmware version: 0x9030206
[ 11.199357] ieee80211 phy0: firmware region code: 10
[ 11.238210] ieee80211 phy0: 2G disabled, 5G enabled
[ 11.243145] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 11.248690] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 11.254548] ieee80211 phy1: priv->pcmd_buf = (ptrval) priv->pphys_cmd_buf = (ptrval)
[ 11.260395] ieee80211 phy1: fw download start
[ 11.260401] ieee80211 phy1: ddr init: download start
[ 11.260783] ieee80211 phy1: ddr init: download complete
[ 11.402342] ieee80211 phy1: FwSize = 450732 downloaded Size = 450732 curr_iteration 65526
[ 12.596357] ieee80211 phy1: fw download complete
[ 12.596392] ieee80211 phy1: device node: pcie@2,0
[ 12.611256] ieee80211 phy1: pcmd = (ptrval)
[ 12.629298] ieee80211 phy1: firmware version: 0x9030206
[ 12.989358] ieee80211 phy1: firmware region code: 10
[ 13.021278] ieee80211 phy1: 2G enabled, 5G disabled
[ 13.026186] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 13.052757] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.061968] Bluetooth: Core ver 2.22
[ 13.065592] NET: Registered protocol family 31
[ 13.070056] Bluetooth: HCI device and connection manager initialized
[ 13.076470] Bluetooth: HCI socket layer initialized
[ 13.081388] Bluetooth: L2CAP socket layer initialized
[ 13.086480] Bluetooth: SCO socket layer initialized
[ 13.091910] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.097252] Bluetooth: BNEP filters: protocol multicast
[ 13.102529] Bluetooth: BNEP socket layer initialized
[ 13.108950] Bluetooth: vendor=0x2df, device=0x9136, class=255, fn=2
[ 13.434312] random: crng init done
[ 13.437738] random: 1 urandom warning(s) missed due to ratelimiting
[ 13.822581] Bluetooth: FW download over, size 616840 bytes
[ 14.420379] sdio platform data not available
[ 14.425466] usbcore: registered new interface driver btusb
[ 14.431758] Bluetooth: HCI UART driver ver 2.3
[ 14.436224] Bluetooth: HCI UART protocol H4 registered
[ 14.441394] Bluetooth: HCI UART protocol BCSP registered
[ 14.447213] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 14.453177] Bluetooth: HIDP socket layer initialized
[ 14.465728] Bluetooth: RFCOMM TTY layer initialized
[ 14.470654] Bluetooth: RFCOMM socket layer initialized
[ 14.475823] Bluetooth: RFCOMM ver 1.11
[ 14.479997] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[ 14.487005] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 14.492250] xt_time: kernel timezone is -0000
[ 14.496967] PPP generic driver version 2.4.2
[ 14.501814] PPP MPPE Compression module registered
[ 14.506973] NET: Registered protocol family 24
[ 14.513931] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 14.519427] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.526707] mwifiex_sdio mmc0:0001:1: Unknown api_id: 4
[ 14.544346] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p189)
[ 14.552507] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p189)
[ 18.090016] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 18.097559] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.103472] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 18.111372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.119069] br-lan: port 1(eth0.1) entered blocking state
[ 18.124545] br-lan: port 1(eth0.1) entered disabled state
[ 18.130185] device eth0.1 entered promiscuous mode
[ 18.135023] device eth0 entered promiscuous mode
[ 18.141871] br-lan: port 1(eth0.1) entered blocking state
[ 18.147302] br-lan: port 1(eth0.1) entered forwarding state
[ 18.153020] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 18.162451] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 18.170523] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.176422] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 18.190328] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 19.059451] ieee80211 phy1: change: 0xffffffff
[ 19.149667] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 19.156162] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 19.169461] br-lan: port 2(wlan1) entered blocking state
[ 19.174845] br-lan: port 2(wlan1) entered disabled state
[ 19.180297] device wlan1 entered promiscuous mode
[ 19.382591] ieee80211 phy0: change: 0xffffffff
[ 19.489525] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.495695] ieee80211 phy1: change: 0x100
[ 19.508762] ieee80211 phy1: change: 0x42
[ 19.657382] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 19.663835] br-lan: port 2(wlan1) entered blocking state
[ 19.669175] br-lan: port 2(wlan1) entered forwarding state
[ 19.674835] br-lan: port 3(wlan0) entered blocking state
[ 19.680174] br-lan: port 3(wlan0) entered disabled state
[ 19.685604] device wlan0 entered promiscuous mode
[ 19.690374] br-lan: port 3(wlan0) entered blocking state
[ 19.695709] br-lan: port 3(wlan0) entered forwarding state
[ 19.737604] ieee80211 phy0: change: 0x100
[ 19.750390] ieee80211 phy0: change: 0x60
[ 19.970366] ieee80211 phy0: change: 0x40
[ 20.170564] br-lan: port 3(wlan0) entered disabled state
[ 20.190362] ieee80211 phy0: change: 0x60
[ 20.288379] ieee80211 phy0: change: 0x100
[ 20.344667] ieee80211 phy0: change: 0x100
[ 20.357380] ieee80211 phy0: change: 0x62
[ 20.525384] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 20.531864] br-lan: port 3(wlan0) entered blocking state
[ 20.537206] br-lan: port 3(wlan0) entered forwarding state