Is there OpenWrt for AirGrid M5 HP

Would like to reopen this topic as before it was i.m.h.o. incorrectly answered with 'no' because of supposed 32MB RAM.
But the HP version of this device actually comes with 64 MB of RAM, 8M Flash, and a SoC AR9342 v2.
It can work with current OpenWrt compiled for ath79 / nanostation-loco-M-XW firmware.

from dmesg:
CPU0 revision is: 0001974c (MIPS 74Kc)
spi-nor spi0.0: mx25l6405d (8192 Kbytes)
Memory: 57284K/65536K available (4818K kernel code, 190K rwdata, 1112K rodata, 1232K init, 196K bss, 8252K reserved, 0K cma-reserved) indicates you should look at

It is just to correct post

when one searches the forum for this specific device.
That post is 'closed' and nothing can be added.

That is the answer: run Nanostation loco-M-XW firmware on it. It is the same hardware platform, in a dish antenna form factor.

The wiki may need to have this added.

There are some old dish models with the XM platform-- which is an AR7241 CPU with 32 MB RAM. These use the Nanostation XM Loco build, with the 32 M limitation.

@wwortel FYI - I have reverted your edits to the dataentry of the AirGrid M5 and have created a new dataentry for the AirGrid M5 HP instead.

I have created a deviepage for the HP version as well:

Feel free to add usefull information about the AirGrid M5 HP there!