Is there a way to install openwrt on my xiaomi 4Agigabit v2?

froyic · November 17, 2024, 12:08am

is there a way to install openwrt on my xiaomi 4A gigabit v2? the title

brada4 · November 17, 2024, 12:52am

Is it gigabit or 100mbps? Add photo of the label.

froyic · November 17, 2024, 12:57am

its a gigabit its a v2 in the openwrt toh says its not possible but in oepnwrt firmware selector says the v2

evs · November 17, 2024, 12:58am

github.com/openwrt/openwrt

add support for Xiaomi Mi Router 4A Gigabit Edition v2

opened 04:53PM - 09 Jan 23 UTC

closed 12:58PM - 10 Jan 23 UTC

e323w

### Describe the bug hello! please add support for `Xiaomi Mi Router 4A Giga…bit Edition v2` (I do not want to do it myself due to the requirement to disclose personal data in 'Signed-off-by', I'm so sorry) you can use this [branch](https://github.com/e323w/openwrt-xiaomi-r4ag-v2/tree/r4agv2) as a base for a pull request (it is based on this [work](https://github.com/Ser9ei/xiaomi-r4agv2-openwrt_patch)) device is the same as `Xiaomi Mi Router 4A Gigabit Edition`, except of: - 5 GHz wifi is MT7663 - addresses of leds, wifi and eth ports are slightly changed - at the end of the flash, another `Config` partition was added, I'm not sure if we should preserve it, but I did it - patch `ramips: mt7621-dts: mux phy0/4 to gmac1` does not seem to work for this device. with him on the `wan` port there is only Tx traffic, but no Rx. so I didn't add it in this branch, I split `mt7621_xiaomi_mi-router-4a-3g-v2.dtsi` into two files: `mt7621_xiaomi_mi-router-4a-common.dtsi` (with common nodes for all 4a* devices) and original `mt7621_xiaomi_mi-router-4a-3g-v2.dtsi` (with only 4a-v1 and 3g-v2 specific nodes). it was possible to use the original file, but then the configuration for v2 would use hacks, including deleting nodes, so why I added this division. I am currently using a build based on this branch and it seems to be working as expected (btw, I'm not sure that the power adjustment for 5 GHz wifi works. at least I did not notice a difference in signal strength at different values) thank you! ### OpenWrt version master ### OpenWrt target/subtarget ramips/mt7621 ### Device Xiaomi Mi Router 4A Gigabit Edition v2 ### Image kind Self-built image ### Steps to reproduce _No response_ ### Actual behaviour _No response_ ### Expected behaviour _No response_ ### Additional info _No response_ ### Diffconfig _No response_ ### Terms - [X] I am reporting an issue for OpenWrt, not an unsupported fork.