Hi, I am a beginner with OpenWRT
I am considering to buy a raspberry 3B+ to install OpenWRT on it (buying a raspberry than a more specialized router since I will certainly use it for other projects later) , however I read that "OpenWRT 18.06.1 is not working on RPi 3B+ due to a problem with the GPU (which is responsible for the boot process)", so I was wondering if it was fixed on the 18.06.2 version, as I would like to avoid issue with my first use of OpenWRT.
Thank you for your answer.
Hi, as they wrote in
I think it would build with the trunk snapshot but not with the latest stable. Also they wrote about an issue to set the wifi as ap instead of wifi client.
I will give it a try next week and report after that.
Regards
Sebastian
1 Like
Hi illyasviel,
yet i tried Openwrt on Raspberry PI 3B+.
With the latest stable 18.06.2 it runs in an kernel panic and reboot (as you wrote).
With the latest snapshot (Thu Jan 31 03:41:58 2019) it boots,
but to access luci you have to
- logon in local console
- setup the Interface to correct static address or change to dhcp
- install luci (webinterface) if you wanted
It was possible for me to create wifi as access-point ,but the auto channel feature wont work.
If you can live with that buy one ,
I think its a great device also for other projects.
Best Regards
Sebastian
1 Like