I picked up a Netgear R6100 for $4. I did a quick searh here and saw it was supported. Not until I got home did I see only V1 is supported, the router just lists R6100. My mistake, I assume this router is not supported, correct? Thanks
Usually, if there is no version listed, it implies v1. That is not a guarantee, but it is often the case.
That said, check the firmware that is on there now -- you should be able to see if it identifies itself as a different version and/or check the firmware version/date and match that against what is on Netgear's website.
Excellent idea and thank you for the quick reply. I will do exactly as you mentioned. The loss is limited to $4 so its worth the try.
There is only one version of these. Also they're easy to debrick with nmrp.
I have had several with hardware failure of the 5 GHz radio it will only transmit a few feet. Test both radios on stock firmware before flashing.
Ok, will do. Thanks for taking time to reply.