Is it possible using imagebuilder to create initramfs-kernel.bin?

I'm try to build rb-nor-flash-16M-ac-initramfs-kernel.bin using:
openwrt-imagebuilder-19.07.2-ar71xx-mikrotik.Linux-x86_64
Purpose - remote TFTP boot device with all packages that i'm specified...

But "openwrt-imagebuilder" produce only:

make image PROFILE="rb-nor-flash-16M-ac" EXTRA_IMAGE_NAME="test04"

openwrt-19.07.2-test04-ar71xx-mikrotik-device-rb-nor-flash-16m-ac.manifest
openwrt-19.07.2-test04-ar71xx-mikrotik-rb-nor-flash-16M-ac-kernel.bin
openwrt-19.07.2-test04-ar71xx-mikrotik-rb-nor-flash-16M-ac-squashfs-sysupgrade.bin
openwrt-19.07.2-test04-ar71xx-mikrotik-root.squashfs
openwrt-19.07.2-test04-ar71xx-mikrotik-vmlinux.bin
openwrt-19.07.2-test04-ar71xx-mikrotik-vmlinux.elf
openwrt-19.07.2-test04-ar71xx-mikrotik-vmlinux.lzma
openwrt-19.07.2-test04-ar71xx-mikrotik-vmlinux-lzma.elf

Is it any way to create ...initramfs-kernel.bin using openwrt-imagebuilder?

1 Like

Hello!
Same problem. Didn't find a solution?
Is it possible to use a ready-made initramfs image (https://downloads.openwrt.org/releases/19.07.4/targets/ar71xx/mikrotik/openwrt-19.07.4-ar71xx-mikrotik-rb-nor-flash-16M-ac-initramfs -kernel.bin) to install my image rb-nor-flash-16M-ac-squashfs-sysupgrade.bin built with Image Builder ???

Same issue here. Any new?