Is it possible to install OpenWrt on Tp-Link WR841N V13.1?

Installing and Using OpenWrt
6

Please explain to me.
Because the site says that the firmware should be edited. But I do not know

7

No,

it says it have to be stripped if the name of the image contains the word boot,
and then it tells you how to do it.

Have you checked the images available for your router at TP-Link ?

1 Like
8

No
I do not know. Please check it out for me

9

Then you probably shouldn't continue down the OpenWRT road ...

I'm also out of toilet paper.

3 Likes
10

What should I do after removing the word "boot" from the firmware?

11

That is not what it says ...

  • in case the file name of this firmware file does contain the word “boot” in it, you need to cut off parts of the image file before flashing it:

The following method applies for the V1, V3, V5, V7, V8, V9, V10 and V13 since the bootloader is the same size.

An example of an image file with the word “boot” in it is wr841nv9_en_3_14_4_up_boot(131129).bin.

Cut the first 0x20200 (that is 131,584 = 257*512) Bytes from original firmware:
dd if=orig.bin of=tplink.bin skip=257 bs=512

1 Like
12

I Find Stripped Openwrt file for V13.
Now how can I revert to stuck frimware.

13
1 Like
14

https://cloud.disroot.org/s/oksmiAS4iM9mx7D/download

Name: tp_recovery(TL-WR841N(EU)_V13_STRIPPED).zip

I downloaded this file .Now how can I revert to stuck frimware

15

Yup, it's right in there .... if you'd just bother and actually read it.

1 Like
16

Ummm, you've been told 3 times:

See Here

And Here

1 Like
17

Sorry I do not understand what you mean. Because my English is weak

18

:confused:

19

Well,

we don't know your language, and the instructions given by us (in english) will be the same as the ones in the wiki anyway ...

1 Like
21

OpenWrt Site: https://translate.google.com/translate?sl=en&tl=fa&u=https://openwrt.org

به انجمن خوش آمدید

:wave:

22

Thanks for the help. But if you do not mind, please explain to me step by step.
Or at least say that to return to the original stock after removing the boot part of the main firmware, you must install it with TFTP, like the installation steps on the router

23

:open_mouth:

این اطلاعات چندین بار ارائه شده است.

This information has been provided multiple times.

:man_facepalming: Again, see: https://translate.google.com/translate?hl=&sl=en&tl=fa&u=https%3A%2F%2Fopenwrt.org%2Ftoh%2Ftp-link%2Ftl-wr841nd%23go_back_to_original_firmware

اگر در مورد مراحل سوالی دارید ، به ما اطلاع دهید.

Let us know if you have any questions about the steps.

24

Any real questions.... ,)

1 Like
25

Hi frollic.thank you for help me
I install openwrt but I have problems. how can I install wps.

26