重启后获取不到ipv6地址的问题 Translation: The IPv6 address cannot be obtained after the restart

The reason we do not know if it will brick it is because we do not know how different it is from original.

We cannot even suggest you return to OEM because if we suggest something and it bricks the router it becomes our fault.

1 Like

so you need talk to Kiddin', no matter what ....

Temporarily use this branch, as ordinary people, other complex can not do, thank you for your patience to answer, 88

1 Like

Colours in first report are from ImmortalWRT https://github.com/immortalwrt
One of prominent copies from OpenWRT with friendly Chinese speaking comunity.

they should tell you to ask Kiddin' too, their ImmortalWRT have nothing to do with the one you've installed.

I wish you luck, never the less.

To change LuCI to Chinese.

ImmortalWRT Update is too slow, not on the pace of the source code

OP is using the firmware coming from openwrt.ai, which is created by folks in China (since there are many local branded routers like the CMCC one started to have OpenWrt variant in China first, then someone ported it to official OpenWrt later), that's why OP says "online compilation"

1 Like

seems like you are using customized version of openwrt which have support of device that official version doesn't have. please contact the origin author of this firmware for further help.
看起来你正在使用一个包含官方版本尚未支持的设备的修改版openwrt,请联系固件原作者以获取更多帮助

2 Likes

openwrt23.05.3
CMCC ARX3000M
试验关闭电源重启光猫后,openwrt无法给在线的终端设备分配IPV6地址,只能分配IPV4地址,再一次重启光猫,故障一直在。经过摸索,本人获得一些解决问题的经验,把wan6口重启一下,各终端设备立即获得IPV6地址。对于没有经验的普通人,就无法解决这样问题,希望改进。

After turning off the power and restarting the optical cat, openwrt can not assign IPV 6 addresses to online terminal devices, only IPV 4 addresses. Repeat restart light cat, the fault is always there. After groping, I get some experience to solve the problem, the wan 6 port restart, the terminal equipment immediately get IPV 6 address. For ordinary people without experience, can not solve such a problem, hope to improve.

if you're still using the 3rd party fw from 重启后获取不到ipv6地址的问题 Translation: The IPv6 address cannot be obtained after the restart - #15 by LilRedDog, ask the 3rd party.

1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.