EA7500 v1 and ea8500 with NSS driver are all working on ACwifidude's repo "OpenWrt SNAPSHOT r15598-c840f8c16a / LuCI Master git-21.016.32520-34e2d6e" Kernel Version 5.4.89
the speed up is impressive,but it's not lucky like R7800 have uptime 60days,it will auto-reboot less than 24 hours
Could you @Ansuel try to fix it? needs your help,Thank you
and here are dts file from you and @ACwifidude
qcom-ipq8064-eax500.dtsi
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
chosen {
bootargs = "console=ttyMSM0,115200n8";
/* append to bootargs adding the root deviceblock nbr from bootloader */
append-rootblock = "ubi.mtd=";
};
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
max-link-speed = <1>;
};
&pcie1 {
status = "okay";
};
&pcie2 {
status = "okay";
};
&nand_controller {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
nand@0 {
reg = <0>;
compatible = "qcom,nandcs";
nand-ecc-strength = <4>;
nand-bus-width = <8>;
nand-ecc-step-size = <512>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x0040000 0x0140000>;
read-only;
};
partition@180000 {
label = "SBL2";
reg = <0x0180000 0x0140000>;
read-only;
};
partition@2c0000 {
label = "SBL3";
reg = <0x02c0000 0x0280000>;
read-only;
};
partition@540000 {
label = "DDRCONFIG";
reg = <0x0540000 0x0120000>;
read-only;
};
partition@660000 {
label = "SSD";
reg = <0x0660000 0x0120000>;
read-only;
};
partition@780000 {
label = "TZ";
reg = <0x0780000 0x0280000>;
read-only;
};
partition@a00000 {
label = "RPM";
reg = <0x0a00000 0x0280000>;
read-only;
};
art: partition@c80000 {
label = "art";
reg = <0x0c80000 0x0140000>;
read-only;
};
partition@dc0000 {
label = "APPSBL";
reg = <0x0dc0000 0x0100000>;
read-only;
};
partition@ec0000 {
label = "u_env";
reg = <0x0ec0000 0x0040000>;
};
partition@f00000 {
label = "s_env";
reg = <0x0f00000 0x0040000>;
};
partition@f40000 {
label = "devinfo";
reg = <0x0f40000 0x0040000>;
};
partition@f80000 {
label = "kernel1";
reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs */
};
partition@1280000 {
label = "rootfs1";
reg = <0x1280000 0x2500000>;
};
partition@3780000 {
label = "kernel2";
reg = <0x3780000 0x2800000>;
};
partition@3a80000 {
label = "rootfs2";
reg = <0x3a80000 0x2500000>;
};
};
};
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x00010 0x2613a0 /* PWS_REG */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
};
&gmac1 {
status = "okay";
compatible = "qcom,nss-gmac";
reg = <0x37200000 0x200000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
phy-mode = "rgmii";
qcom,id = <1>;
qcom,pcs-chanid = <0>;
qcom,phy-mdio-addr = <0>;
qcom,poll-required = <0>;
qcom,rgmii-delay = <1>;
qcom,phy_mii_type = <0>;
qcom,emulation = <0>;
qcom,forced-speed = <1000>;
qcom,forced-duplex = <1>;
qcom,socver = <0>;
qcom,irq = <255>;
mdiobus = <&mdio0>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
compatible = "qcom,nss-gmac";
reg = <0x37400000 0x200000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
phy-mode = "sgmii";
qcom,id = <2>;
qcom,pcs-chanid = <1>;
qcom,phy-mdio-addr = <4>;
qcom,poll-required = <0>; /* no polling */
qcom,rgmii-delay = <0>;
qcom,phy_mii_type = <1>;
qcom,emulation = <0>;
qcom,forced-speed = <1000>;
qcom,forced-duplex = <1>;
qcom,socver = <0>;
qcom,irq = <258>;
mdiobus = <&mdio0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&adm_dma {
status = "okay";
};
qcom-ipq8064-ea8500.dts
#include "qcom-ipq8064-eax500.dtsi"
/ {
model = "Linksys EA8500 WiFi Router";
compatible = "linksys,ea8500", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x1e000000>;
device_type = "memory";
};
aliases {
mdio-gpio0 = &mdio0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wifi {
label = "wifi";
gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
wps {
label = "green:wps";
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
};
led_power: power {
label = "white:power";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wifi {
label = "green:wifi";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio65", "gpio67", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio6", "gpio53", "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};
&partitions {
partition@5f80000 {
label = "syscfg";
reg = <0x5f80000 0x2080000>;
};
};
&mdio0 {
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&gmac1 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
};
/* LAN */
&gmac2 {
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
};
qcom-ipq8064-ea7500-v1.dts
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-eax500.dtsi"
/ {
model = "Linksys EA7500 V1 WiFi Router";
compatible = "linksys,ea7500-v1", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0xe000000>;
device_type = "memory";
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
/* look for root deviceblock nbr in this bootarg */
find-rootblock = "ubi.mtd=";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power: power {
label = "white:power";
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio65", "gpio68";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
led_pins: led_pins {
mux {
pins = "gpio6";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
};
&partitions {
partition@5f80000 {
label = "sysdiag";
reg = <0x5f80000 0x100000>;
};
partition@6080000 {
label = "syscfg";
reg = <0x6080000 0x1f80000>;
};
};
&mdio0 {
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&gmac1 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
};
/* LAN */
&gmac2 {
qcom,phy_mdio_addr = <0>; /* none */
qcom,poll_required = <0>; /* no polling */
qcom,rgmii_delay = <0>;
qcom,emulation = <0>;
};