This is a single R7800 that I have running my home. I have had recent images run for 8 days. I think I had one run 10 or more days. The run time seems variable and does not seem to be based on load. Can you put this 'ramoops log' feature in the next builds at least until we can get it figured out? I am not building my own here, but using yours that you provide from git. The spontaneous reboot has been a 'feature' of the NSS builds for a while and I really think it needs to be resolved so we can get to a 'stable' build.
I have managed to get your image working, doing the configuration again. dns certainly does not work from internal network WIRED LAN, wireless if it works. why?
If I put a wifi adapter to my PC, and I connect to mired wifi, IF IT WORKS.
I use a lot the external DNS address mydirectionip.com to use my services from LAN
1 Like
I don’t know what is causing the internal DNS issue. There has to be a firewall tweak / port forward that is easy to implement.
I can build a 600mhz NSS core build and see if that is more stable (Ansuel wants to test if the higher speed needs more voltage - thus the crashes possible are a voltage issue rather than a kernel issue). Should be able to build it tonight.
1 Like
@ACwifidude Here are logs from serial console of ea7500 firmware 20201231 (it's the best but will reboot at night sometime)
Updating boot_count ... done
Hit any key to stop autoboot: 0
MMC Device 0 not found
MMC Device 0 not found
Loading from nand0, offset 0xf80000
Image Name: ARM OpenWrt Linux-5.4.85
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2909657 Bytes = 2.8 MiB
Load Address: 42208000
Entry Point: 42208000
Automatic boot of image at addr 0x44000000 ...
Image Name: ARM OpenWrt Linux-5.4.85
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2909657 Bytes = 2.8 MiB
Load Address: 42208000
Entry Point: 42208000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
mtdids not defined, no default present
info: "mtdparts" not set
Using machid 0x1260 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.85 (HTPC@localhost.localdomain) (gcc version 8.
4.0 (OpenWrt GCC 8.4.0 r15337+80-b0b7f2b8f3)) #0 SMP Thu Dec 31 18:57:44 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys EA7500 V1 WiFi Router
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 15 pages/cpu s30220 r8192 d23028 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 56840
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=14
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 init=
/sbin/init rootfstype=squashfs ubi.mtd=14,2048 ubi.block=0,0 root=/dev/ubiblock0
_0 rootwait ro
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, l
inear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, lin
ear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 217228K/229376K available (6226K kernel code, 196K rwdata
, 1556K rodata, 1024K init, 233K bss, 12148K reserved, 0K cma-reserved, 0K highm
em)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif
fies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x4ec wit
h crng_init=0
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, m
ax_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 34359
7383600ns
[ 0.000023] Switching to timer-based delay loop, resolution 160ns
[ 0.000260] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000279] pid_max: default: 32768 minimum: 301
[ 0.000471] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea
r)
[ 0.000489] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,
linear)
[ 0.001522] CPU: Testing write buffer coherency: ok
[ 0.002693] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.002878] rcu: Hierarchical SRCU implementation.
[ 0.003366] smp: Bringing up secondary CPUs ...
[ 0.005271] smp: Brought up 1 node, 2 CPUs
[ 0.005290] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.005301] CPU: All CPU(s) started in SVC mode.
[ 0.016180] VFP support v0.3: implementor 51 architecture 64 part 4d variant
2 rev 0
[ 0.016330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 19112604462750000 ns
[ 0.016359] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.016532] pinctrl core: initialized pinctrl subsystem
[ 0.017664] NET: Registered protocol family 16
[ 0.017977] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.019344] cpuidle: using governor ladder
[ 0.019413] cpuidle: using governor menu
[ 0.055383] usbcore: registered new interface driver usbfs
[ 0.055464] usbcore: registered new interface driver hub
[ 0.055552] usbcore: registered new device driver usb
[ 0.055612] pps_core: LinuxPPS API ver. 1 registered
[ 0.055624] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[ 0.055656] PTP clock support registered
[ 0.056489] workqueue: max_active 576 requested for napi_workq is out of rang
e, clamping between 1 and 512
[ 0.057643] clocksource: Switched to clocksource dg_timer
[ 0.058527] thermal_sys: Registered thermal governor 'step_wise'
[ 0.060924] NET: Registered protocol family 2
[ 0.061705] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes, linear)
[ 0.061750] TCP established hash table entries: 2048 (order: 1, 8192 bytes, l
inear)
[ 0.061784] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.061819] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.061923] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.061954] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.062362] NET: Registered protocol family 1
[ 0.062412] PCI: CLS 0 bytes, default 64
[ 0.063716] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.070537] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.070555] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[ 0.110572] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using
dummy regulator
[ 0.110722] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, u
sing dummy regulator
[ 0.110830] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found
, using dummy regulator
[ 0.111097] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.111169] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe0000
0
[ 0.111207] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x0800000
0
[ 0.333345] qcom-pcie 1b500000.pci: Link up
[ 0.333520] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.333546] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.333568] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus addr
ess [0xfe00000-0xfefffff])
[ 0.333584] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.333648] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.333821] pci 0000:00:00.0: supports D1
[ 0.333837] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.337824] PCI: bus0: Fast back to back transfers disabled
[ 0.338283] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.338665] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.339902] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.340211] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by
2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.344157] PCI: bus1: Fast back to back transfers disabled
[ 0.344246] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.344272] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bi
t]
[ 0.344411] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.344436] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.345188] pcieport 0000:00:00.0: AER: enabled with IRQ 40
[ 0.345743] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using
dummy regulator
[ 0.345868] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, u
sing dummy regulator
[ 0.346003] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found
, using dummy regulator
[ 0.346264] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.346328] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e0000
0
[ 0.346362] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e00000
0
[ 0.575046] qcom-pcie 1b700000.pci: Link up
[ 0.575199] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.575219] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.575236] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.575295] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.575449] pci 0001:00:00.0: supports D1
[ 0.575464] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.579502] PCI: bus0: Fast back to back transfers disabled
[ 0.579822] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.580173] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.581318] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.585506] PCI: bus1: Fast back to back transfers disabled
[ 0.585581] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.585606] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bi
t]
[ 0.585730] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.585751] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.586575] pcieport 0001:00:00.0: AER: enabled with IRQ 42
[ 0.587137] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda not found, using
dummy regulator
[ 0.587271] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_phy not found, u
sing dummy regulator
[ 0.587375] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_refclk not found
, using dummy regulator
[ 0.587658] qcom-pcie 1b900000.pci: host bridge /soc/pci@1b900000 ranges:
[ 0.587723] qcom-pcie 1b900000.pci: IO 0x35e00000..0x35efffff -> 0x35e0000
0
[ 0.587838] qcom-pcie 1b900000.pci: MEM 0x32000000..0x35dfffff -> 0x3200000
0
[ 1.737641] qcom-pcie 1b900000.pci: Phy link never came up
[ 1.739667] qcom-pcie 1b900000.pci: cannot initialize host
[ 1.740068] qcom-pcie: probe of 1b900000.pci failed with error -110
[ 1.742558] L2 @ QSB rate. Forcing new rate.
[ 1.742781] L2 @ 384000 KHz
[ 1.742973] CPU0 @ 800000 KHz
[ 1.742988] CPU1 @ QSB rate. Forcing new rate.
[ 1.743117] CPU1 @ 384000 KHz
[ 1.746933] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.749326] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.750181] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.750236] msm_serial 16340000.serial: uartclk = 7372800
[ 1.750312] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 43, base_baud
= 460800) is a MSM
[ 1.750349] msm_serial: console setup on port #0
[ 2.603946] printk: console [ttyMSM0] enabled
[ 2.608987] msm_serial: driver initialized
[ 2.618231] loop: module loaded
[ 2.619835] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.620186] nand: AMD/Spansion S34MS01G2
[ 2.626782] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz
e: 64
[ 2.630986] 19 fixed-partitions partitions found on MTD device qcom_nand.0
[ 2.638165] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.644931] 0x000000000000-0x000000040000 : "SBL1"
[ 2.651917] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.658139] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.662741] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.665350] random: fast init done
[ 2.673720] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.676511] 0x000000660000-0x000000780000 : "SSD"
[ 2.680799] 0x000000780000-0x000000a00000 : "TZ"
[ 2.687764] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.692874] 0x000000c80000-0x000000dc0000 : "art"
[ 2.695845] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.699412] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.703145] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.707751] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.712658] 0x000000f80000-0x000003780000 : "kernel1"
[ 2.782813] 0x000001280000-0x000003780000 : "rootfs1"
[ 2.845071] 0x000003780000-0x000005f80000 : "kernel2"
[ 2.911340] 0x000003a80000-0x000005f80000 : "rootfs2"
[ 2.972820] 0x000005f80000-0x000006080000 : "sysdiag"
[ 2.975426] 0x000006080000-0x000008000000 : "syscfg
[ 3.001390] random: crng init done
[ 3.031216] libphy: ipq8064_mdio_bus: probed
[ 3.051863] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio
-mii
[ 3.885641] ar8327: qca,phy-rgmii-en is not specified
[ 3.886221] libphy: Fixed MDIO Bus: probed
[ 3.890322] i2c /dev entries driver
[ 3.896086] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operatio
ns
[ 3.897256] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operatio
ns
[ 3.905149] sdhci: Secure Digital Host Controller Interface driver
[ 3.911722] sdhci: Copyright(c) Pierre Ossman
[ 3.917967] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.924678] NET: Registered protocol family 10
[ 3.930247] Segment Routing with IPv6
[ 3.932385] NET: Registered protocol family 17
[ 3.936122] Bridge firewalling registered
[ 3.940678] 8021q: 802.1Q VLAN Support v1.8
[ 3.944520] Registering SWP/SWPB emulation handler
[ 3.972611] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.985121] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.985382] s1a: supplied by regulator-dummy
[ 3.989373] s1b: Bringing 0uV into 1050000-1050000uV
[ 3.993610] s1b: supplied by regulator-dummy
[ 3.998555] s2a: Bringing 0uV into 800000-800000uV
[ 4.002803] s2a: supplied by regulator-dummy
[ 4.007334] s2b: Bringing 0uV into 800000-800000uV
[ 4.011937] s2b: supplied by regulator-dummy
[ 4.025113] ubi0: attaching mtd14
[ 4.350735] ubi0: scanning is finished
[ 4.362969] ubi0: attached mtd14 (name "rootfs1", size 37 MiB)
[ 4.362995] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.367693] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.374644] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.381491] ubi0: good PEBs: 296, bad PEBs: 0, corrupted PEBs: 0
[ 4.388257] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12
8
[ 4.394433] ubi0: max/mean erase counter: 48/34, WL threshold: 4096, image se
quence number: 1594157890
[ 4.401533] ubi0: available PEBs: 0, total reserved PEBs: 296, PEBs reserved
for bad PEB handling: 20
[ 4.411861] ubi0: background thread "ubi_bgt0d" started, PID 67
[ 4.411881] block ubiblock0_0: created from ubi0:0(rootfs)
[ 4.425764] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 4.431402] hctÿ[ 4.444318] squashfs: SQUASHFS error: Xattrs in filesystem
, these will be ignored
[ 4.444354] unable to read xattr id index table
[ 4.472591] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 4.474611] Freeing unused kernel memory: 1024K
[ 4.489099] Run /sbin/init as init process
[ 5.064077] init: Console is alive
[ 5.064211] init: - watchdog -
[ 7.185659] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 7.332641] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.335847] SCSI subsystem initialized
[ 7.348608] ehci-fsl: Freescale EHCI Host controller driver
[ 7.349297] ehci-platform: EHCI generic platform driver
[ 7.357090] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.358970] ohci-platform: OHCI generic platform driver
[ 7.366498] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[ 7.369635] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[ 7.375464] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[ 7.381615] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[ 7.389226] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[ 7.393174] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[ 7.398994] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[ 7.404978] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[ 7.412512] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[ 7.512060] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[ 7.614391] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 7.614440] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu
mber 1
[ 7.619015] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100
quirks 0x0000000002010010
[ 7.626457] xhci-hcd xhci-hcd.0.auto: irq 46, io mem 0x11000000
[ 7.636700] hub 1-0:1.0: USB hub found
[ 7.642033] hub 1-0:1.0: 1 port detected
[ 7.645633] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 7.649565] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu
mber 2
[ 7.654800] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 7.662541] usb usb2: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 7.669373] hub 2-0:1.0: USB hub found
[ 7.677283] hub 2-0:1.0: 1 port detected
[ 7.681096] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.684834] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu
mber 3
[ 7.690348] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100
quirks 0x0000000002010010
[ 7.697710] xhci-hcd xhci-hcd.1.auto: irq 47, io mem 0x10000000
[ 7.708352] hub 3-0:1.0: USB hub found
[ 7.712973] hub 3-0:1.0: 1 port detected
[ 7.716969] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 7.720912] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu
mber 4
[ 7.726154] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 7.733868] usb usb4: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 7.740704] hub 4-0:1.0: USB hub found
[ 7.748677] hub 4-0:1.0: 1 port detected
[ 7.754644] usbcore: registered new interface driver usb-storage
[ 7.756285] kmodloader: done loading kernel modules from /etc/modules-boot.d/
*
[ 7.768232] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 20.703404] mount_root: loading kmods from internal overlay
[ 20.738141] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 20.739566] kmodloader: done loading kernel modules from //etc/modules-boot.d
/*
[ 20.751838] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(RE
AD) flags 0x80700 phys_seg 4 prio class 0
[ 20.752786] blk_update_request: I/O error, dev mtdblock0, sector 8 op 0x0:(RE
AD) flags 0x80700 phys_seg 3 prio class 0
[ 20.762866] blk_update_request: I/O error, dev mtdblock0, sector 16 op 0x0:(R
EAD) flags 0x80700 phys_seg 2 prio class 0
[ 20.773726] blk_update_request: I/O error, dev mtdblock0, sector 24 op 0x0:(R
EAD) flags 0x80700 phys_seg 1 prio class 0
[ 20.784228] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(RE
AD) flags 0x0 phys_seg 1 prio class 0
[ 20.794065] Buffer I/O error on dev mtdblock0, logical block 0, async page re
ad
[ 20.850535] blk_update_request: I/O error, dev mtdblock0, sector 32 op 0x0:(R
EAD) flags 0x80700 phys_seg 7 prio class 0
[ 20.851650] blk_update_request: I/O error, dev mtdblock0, sector 40 op 0x0:(R
EAD) flags 0x80700 phys_seg 6 prio class 0
[ 20.861289] blk_update_request: I/O error, dev mtdblock0, sector 48 op 0x0:(R
EAD) flags 0x80700 phys_seg 5 prio class 0
[ 20.872019] blk_update_request: I/O error, dev mtdblock0, sector 56 op 0x0:(R
EAD) flags 0x80700 phys_seg 4 prio class 0
[ 20.882793] blk_update_request: I/O error, dev mtdblock0, sector 64 op 0x0:(R
EAD) flags 0x80700 phys_seg 3 prio class 0
[ 20.896632] Buffer I/O error on dev mtdblock0, logical block 1, async page re
ad
[ 20.912128] Buffer I/O error on dev mtdblock1, logical block 0, async page re
ad
[ 20.924448] Buffer I/O error on dev mtdblock1, logical block 1, async page re
ad
[ 21.279807] Buffer I/O error on dev mtdblock2, logical block 0, async page re
ad
[ 21.290900] Buffer I/O error on dev mtdblock2, logical block 1, async page re
ad
[ 21.297071] Buffer I/O error on dev mtdblock3, logical block 0, async page re
ad
[ 21.300534] Buffer I/O error on dev mtdblock3, logical block 0, async page re
ad
[ 21.310202] Buffer I/O error on dev mtdblock4, logical block 0, async page re
ad
[ 21.323594] Buffer I/O error on dev mtdblock4, logical block 0, async page re
ad
[ 21.472948] UBIFS (ubi0:1): default file-system created
[ 21.473870] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 21.477333] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 170
[ 21.579711] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root
fs_data"
[ 21.579737] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u
nit sizes: 2048 bytes/2048 bytes
[ 21.586518] UBIFS (ubi0:1): FS size: 25395200 bytes (24 MiB, 200 LEBs), journ
al size 1269760 bytes (1 MiB, 10 LEBs)
[ 21.596469] UBIFS (ubi0:1): reserved for root: 1199478 bytes (1171 KiB)
[ 21.606722] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 220DB
B05-4606-42EA-8F8F-06F8B2B4A087, small LPT model
[ 21.614262] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 21.624854] block: unable to load configuration (fstab: Entry not found)
[ 21.631616] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 21.638554] block: unable to load configuration (fstab: Entry not found)
[ 21.644794] block: attempting to load /etc/config/fstab
[ 21.654158] block: unable to load configuration (fstab: Entry not found)
[ 21.656510] block: no usable configuration
[ 21.666426] UBIFS (ubi0:1): un-mount UBI device 0
[ 21.667338] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 21.679270] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 21.679700] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 171
[ 21.769861] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root
fs_data"
[ 21.769886] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u
nit sizes: 2048 bytes/2048 bytes
[ 21.776666] UBIFS (ubi0:1): FS size: 25395200 bytes (24 MiB, 200 LEBs), journ
al size 1269760 bytes (1 MiB, 10 LEBs)
[ 21.786627] UBIFS (ubi0:1): reserved for root: 1199478 bytes (1171 KiB)
[ 21.796882] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 220DB
B05-4606-42EA-8F8F-06F8B2B4A087, small LPT model
[ 22.270242] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 22.270340] block: unable to load configuration (fstab: Entry not found)
[ 22.276044] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 22.283111] block: unable to load configuration (fstab: Entry not found)
[ 22.289461] block: attempting to load /etc/config/fstab
[ 22.296106] block: unable to load configuration (fstab: Entry not found)
[ 22.301176] block: no usable configuration
[ 22.311195] mount_root: overlay filesystem has not been fully initialized yet
[ 22.312461] mount_root: switching to ubifs overlay
[ 22.327989] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 22.373624] procd: - early -
[ 22.373741] procd: - watchdog -
[ 22.957538] procd: - watchdog -
[ 23.000227] procd: - ubus -
[ 23.161773] procd: - init -
Please press Enter to activate this console.
[ 23.651368] urngd: v1.0.2 started.
[ 23.684276] kmodloader: loading kernel modules from /etc/modules.d/*
[ 23.736197] Key type cifs.idmap registered
[ 23.743117] NET: Registered protocol family 15
[ 23.744424] Initializing XFRM netlink socket
[ 23.747764] tun: Universal TUN/TAP device driver, 1.6
[ 23.753880] **********************************************************
[ 23.755820] * Driver :NSS GMAC Driver - RTL v(3.72a)
[ 23.762307] * Version :1.0
[ 23.767359] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All ri
ghts reserved.
[ 23.770566] **********************************************************
[ 23.929828] nss_driver - fw of size 536324 bytes copied to load addr: 400000
00, nss_id : 0
[ 23.930564] nss_driver - Turbo Support 1
[ 23.936983] Supported Frequencies -
[ 23.936985] 733Mhz
[ 23.941217] 733Mhz
[ 23.944699] 733Mhz
[ 23.946524]
[ 23.950915] d5b23f5f: meminfo init succeed
[ 23.979848] nss_driver - fw of size 218224 bytes copied to load addr: 408000
00, nss_id : 1
[ 23.980128] cef08963: meminfo init succeed
[ 23.987095] node size 1 # items 2
[ 23.987103] memory: 0 0 (avl 223502336) items 2 active_cores 2
[ 23.987113] d5b23f5f: nss core 0 booted successfully
[ 24.000442] debugfs: File 'n2h' in directory 'stats' already present!
[ 24.005409] debugfs: File 'qrfs' in directory 'stats' already present!
[ 24.011821] debugfs: File 'c2c_tx' in directory 'stats' already present!
[ 24.018224] debugfs: File 'c2c_rx' in directory 'stats' already present!
[ 24.025029] debugfs: File 'unaligned' in directory 'stats' already present!
[ 24.035739] node size 1 # items 2
[ 24.038470] memory: 0 0 (avl 223502336) items 2 active_cores 2
[ 24.041863] cef08963: nss core 1 booted successfully
[ 24.066876] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 24.074151] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 24.123548] PPP generic driver version 2.4.2
[ 24.124288] NET: Registered protocol family 24
[ 24.132013] Mirror/redirect action on
[ 24.136688] u32 classifier
[ 24.136706] input device check on
[ 24.138382] Actions configured
[ 24.150123] fuse: init (API version 7.31)
[ 24.152745] Loading modules backported from Linux version v5.8.18-0-gab435ce4
9bd1
[ 24.153122] Backport generated by backports.git v5.8.18-1-0-ga630fd46
[ 24.177212] wireguard: WireGuard 1.0.20201112 loaded. See www.wireguard.com f
or information.
[ 24.177240] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c
4.com>. All Rights Reserved.
[ 24.213806] xt_time: kernel timezone is -0000
[ 24.271157] ath10k 5.8 driver, optimized for CT firmware, probing pci device:
0x40.
[ 24.272580] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 24.278577] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 r
eset_mode 0
[ 26.193647] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id
0x003b01ff sub 168c:0002
[ 26.193681] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs
1 testmode 0
[ 26.203599] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9980-fW-13-5ae337b
b1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regd
ump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc
-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 b
36a12bf
[ 26.277678] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09
f2
[ 27.436775] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid
: 96
[ 27.436808] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 27.514763] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 1
86 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 27.515473] ath10k_pci 0000:01:00.0: wmi print 'free: 31080 iram: 23028 sram:
9596'
[ 27.831119] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-ca
l-file max-sta 32 raw 0 hwcrypto 1
[ 27.944131] ath10k 5.8 driver, optimized for CT firmware, probing pci device:
0x40.
[ 27.945722] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 27.951653] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 r
eset_mode 0
[ 28.861623] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id
0x003b01ff sub 168c:0002
[ 28.861669] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs
1 testmode 0
[ 28.872248] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9980-fW-13-5ae337b
b1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regd
ump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc
-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 b
36a12bf
[ 28.944022] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09
f2
[ 30.093742] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid
: 96
[ 30.093772] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 30.171300] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 1
86 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 30.171364] ath10k_pci 0001:01:00.0: wmi print 'free: 31080 iram: 23028 sram:
9596'
[ 30.436855] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-ca
l-file max-sta 32 raw 0 hwcrypto 1
[ 30.533437] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 39.823416] ECM init
[ 39.823467] ECM database jhash random seed: 0xcedb43ad
[ 39.826061] ECM init complete
[ 42.685232] print_req_error: 224 callbacks suppressed
[ 42.685240] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(RE
AD) flags 0x80700 phys_seg 4 prio class 0
[ 42.690290] blk_update_request: I/O error, dev mtdblock0, sector 8 op 0x0:(RE
AD) flags 0x80700 phys_seg 3 prio class 0
[ 42.700896] blk_update_request: I/O error, dev mtdblock0, sector 16 op 0x0:(R
EAD) flags 0x80700 phys_seg 2 prio class 0
[ 42.711731] blk_update_request: I/O error, dev mtdblock0, sector 24 op 0x0:(R
EAD) flags 0x80700 phys_seg 1 prio class 0
[ 42.722272] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(RE
AD) flags 0x0 phys_seg 1 prio class 0
[ 42.732044] buffer_io_error: 26 callbacks suppressed
[ 42.732049] Buffer I/O error on dev mtdblock0, logical block 0, async page re
ad
[ 42.750121] blk_update_request: I/O error, dev mtdblock0, sector 32 op 0x0:(R
EAD) flags 0x80700 phys_seg 4 prio class 0
[ 42.755635] blk_update_request: I/O error, dev mtdblock0, sector 40 op 0x0:(R
EAD) flags 0x80700 phys_seg 3 prio class 0
[ 42.766518] blk_update_request: I/O error, dev mtdblock0, sector 48 op 0x0:(R
EAD) flags 0x80700 phys_seg 3 prio class 0
[ 42.777249] blk_update_request: I/O error, dev mtdblock0, sector 56 op 0x0:(R
EAD) flags 0x80700 phys_seg 2 prio class 0
[ 42.788007] blk_update_request: I/O error, dev mtdblock0, sector 64 op 0x0:(R
EAD) flags 0x80700 phys_seg 2 prio class 0
[ 42.801851] Buffer I/O error on dev mtdblock0, logical block 1, async page re
ad
[ 42.813704] Buffer I/O error on dev mtdblock1, logical block 0, async page re
ad
[ 42.824274] Buffer I/O error on dev mtdblock1, logical block 1, async page re
ad
[ 43.128099] Buffer I/O error on dev mtdblock2, logical block 0, async page re
ad
[ 43.138124] Buffer I/O error on dev mtdblock2, logical block 1, async page re
ad
[ 43.143706] Buffer I/O error on dev mtdblock3, logical block 0, async page re
ad
[ 43.147314] Buffer I/O error on dev mtdblock3, logical block 0, async page re
ad
[ 43.156930] Buffer I/O error on dev mtdblock4, logical block 0, async page re
ad
[ 43.169752] Buffer I/O error on dev mtdblock4, logical block 0, async page re
ad
[ 43.770373] ipq8064-mdio 37000000.mdio eth1: 1000 Mbps Full Duplex
[ 44.894270] device eth1 entered promiscuous mode
[ 44.894995] br-lan: port 1(eth1.1) entered blocking state
[ 44.898141] br-lan: port 1(eth1.1) entered disabled state
[ 44.903981] device eth1.1 entered promiscuous mode
[ 44.920415] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 44.937135] br-lan: port 1(eth1.1) entered blocking state
[ 44.937163] br-lan: port 1(eth1.1) entered forwarding state
[ 44.999527] ipq8064-mdio 37000000.mdio eth0: 1000 Mbps Full Duplex
[ 46.090961] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 46.091538] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 46.096864] device eth0 entered promiscuous mode
And Here is the the ea7500 firmware of 20210124 (auto rebooting after 10 secs issue)
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.91 (HTPC@localhost.localdomain) (gcc version 8.
4.0 (OpenWrt GCC 8.4.0 r15592+17-96017a6013)) #0 SMP Sun Jan 24 18:14:57 2021
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys EA7500 V1 WiFi Router
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] percpu: Embedded 15 pages/cpu s30220 r8192 d23028 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 56840
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=16
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 init=
/sbin/init rootfstype=squashfs ubi.mtd=16,2048 ubi.block=0,0 root=/dev/ubiblock0
_0 rootwait ro
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, l
inear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, lin
ear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 217228K/229376K available (6244K kernel code, 196K rwdata
, 1556K rodata, 1024K init, 233K bss, 12148K reserved, 0K cma-reserved, 0K highm
em)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif
fies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x4ec wit
h crng_init=0
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, m
ax_idle_ns: 305801671480 ns
[ 0.000009] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 34359
7383600ns
[ 0.000024] Switching to timer-based delay loop, resolution 160ns
[ 0.000271] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000292] pid_max: default: 32768 minimum: 301
[ 0.000484] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea
r)
[ 0.000503] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,
linear)
[ 0.001557] CPU: Testing write buffer coherency: ok
[ 0.002714] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.002891] rcu: Hierarchical SRCU implementation.
[ 0.003385] smp: Bringing up secondary CPUs ...
[ 0.005301] smp: Brought up 1 node, 2 CPUs
[ 0.005316] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.005326] CPU: All CPU(s) started in SVC mode.
[ 0.016317] VFP support v0.3: implementor 51 architecture 64 part 4d variant
2 rev 0
[ 0.016467] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 19112604462750000 ns
[ 0.016495] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.016640] pinctrl core: initialized pinctrl subsystem
[ 0.017785] NET: Registered protocol family 16
[ 0.018094] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.019476] cpuidle: using governor ladder
[ 0.019546] cpuidle: using governor menu
[ 0.055728] usbcore: registered new interface driver usbfs
[ 0.055808] usbcore: registered new interface driver hub
[ 0.055876] usbcore: registered new device driver usb
[ 0.055932] pps_core: LinuxPPS API ver. 1 registered
[ 0.055946] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[ 0.055979] PTP clock support registered
[ 0.056838] workqueue: max_active 576 requested for napi_workq is out of rang
e, clamping between 1 and 512
[ 0.057994] clocksource: Switched to clocksource dg_timer
[ 0.058863] thermal_sys: Registered thermal governor 'step_wise'
[ 0.061320] NET: Registered protocol family 2
[ 0.062277] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes, linear)
[ 0.062318] TCP established hash table entries: 2048 (order: 1, 8192 bytes, l
inear)
[ 0.062349] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.062383] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.062488] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.062516] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.062766] NET: Registered protocol family 1
[ 0.062815] PCI: CLS 0 bytes, default 64
[ 0.064152] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.071101] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.071118] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT
Y) (c) 2001-2006 Red Hat, Inc.
[ 0.110218] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using
dummy regulator
[ 0.110363] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, u
sing dummy regulator
[ 0.110470] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found
, using dummy regulator
[ 0.110732] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.110808] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe0000
0
[ 0.110846] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x0800000
0
[ 0.333471] qcom-pcie 1b500000.pci: Link up
[ 0.333645] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.333669] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.333690] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus addr
ess [0xfe00000-0xfefffff])
[ 0.333707] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.333769] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.333944] pci 0000:00:00.0: supports D1
[ 0.333960] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.337985] PCI: bus0: Fast back to back transfers disabled
[ 0.338447] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.338828] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.340067] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.340375] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by
2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.344363] PCI: bus1: Fast back to back transfers disabled
[ 0.344448] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.344472] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bi
t]
[ 0.344610] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.344635] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.345373] pcieport 0000:00:00.0: AER: enabled with IRQ 40
[ 0.345940] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using
dummy regulator
[ 0.346071] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, u
sing dummy regulator
[ 0.346198] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found
, using dummy regulator
[ 0.346460] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.346520] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e0000
0
[ 0.346556] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e00000
0
[ 0.575394] qcom-pcie 1b700000.pci: Link up
[ 0.575552] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.575571] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.575588] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.575644] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.575784] pci 0001:00:00.0: supports D1
[ 0.575799] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.579856] PCI: bus0: Fast back to back transfers disabled
[ 0.580177] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.580528] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.581670] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.585861] PCI: bus1: Fast back to back transfers disabled
[ 0.585933] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.585958] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bi
t]
[ 0.586084] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.586105] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.586920] pcieport 0001:00:00.0: AER: enabled with IRQ 42
[ 0.587500] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda not found, using
dummy regulator
[ 0.587620] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_phy not found, u
sing dummy regulator
[ 0.587736] qcom-pcie 1b900000.pci: 1b900000.pci supply vdda_refclk not found
, using dummy regulator
[ 0.588009] qcom-pcie 1b900000.pci: host bridge /soc/pci@1b900000 ranges:
[ 0.588189] qcom-pcie 1b900000.pci: IO 0x35e00000..0x35efffff -> 0x35e0000
0
[ 0.588224] qcom-pcie 1b900000.pci: MEM 0x32000000..0x35dfffff -> 0x3200000
0
[ 1.737987] qcom-pcie 1b900000.pci: Phy link never came up
[ 1.740012] qcom-pcie 1b900000.pci: cannot initialize host
[ 1.740390] qcom-pcie: probe of 1b900000.pci failed with error -110
[ 1.742940] L2 @ QSB rate. Forcing new rate.
[ 1.743177] L2 @ 384000 KHz
[ 1.743364] CPU0 @ 800000 KHz
[ 1.743377] CPU1 @ QSB rate. Forcing new rate.
[ 1.743511] CPU1 @ 384000 KHz
[ 1.747378] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 1.749820] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.750688] msm_serial 16340000.serial: msm_serial: detected port #0
[ 1.750743] msm_serial 16340000.serial: uartclk = 7372800
[ 1.750815] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 43, base_baud
= 460800) is a MSM
[ 1.750857] msm_serial: console setup on port #0
[ 2.604445] printk: console [ttyMSM0] enabled
[ 2.609482] msm_serial: driver initialized
[ 2.618811] loop: module loaded
[ 2.620464] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 2.620763] nand: AMD/Spansion S34MS01G2
[ 2.627358] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz
e: 64
[ 2.631548] 19 fixed-partitions partitions found on MTD device qcom_nand.0
[ 2.638729] Creating 19 MTD partitions on "qcom_nand.0":
[ 2.645508] 0x000000000000-0x000000040000 : "SBL1"
[ 2.652502] 0x000000040000-0x000000180000 : "MIBIB"
[ 2.658656] 0x000000180000-0x0000002c0000 : "SBL2"
[ 2.663312] 0x0000002c0000-0x000000540000 : "SBL3"
[ 2.665927] random: fast init done
[ 2.674336] 0x000000540000-0x000000660000 : "DDRCONFIG"
[ 2.677141] 0x000000660000-0x000000780000 : "SSD"
[ 2.681366] 0x000000780000-0x000000a00000 : "TZ"
[ 2.688472] 0x000000a00000-0x000000c80000 : "RPM"
[ 2.693491] 0x000000c80000-0x000000dc0000 : "art"
[ 2.696478] 0x000000dc0000-0x000000ec0000 : "APPSBL"
[ 2.699979] 0x000000ec0000-0x000000f00000 : "u_env"
[ 2.703713] 0x000000f00000-0x000000f40000 : "s_env"
[ 2.708310] 0x000000f40000-0x000000f80000 : "devinfo"
[ 2.713247] 0x000000f80000-0x000003780000 : "kernel1"
[ 2.783360] 0x000001280000-0x000003780000 : "rootfs1"
[ 2.845483] 0x000003780000-0x000005f80000 : "kernel2"
[ 2.912175] 0x000003a80000-0x000005f80000 : "rootfs2"
[ 2.973789] 0x000005f80000-0x000006080000 : "sysdiag"
[ 2.976412] 0x000006080000-0x000008000000 : "syscfg"
[ 3.003759] random: crng init done
[ 3.033779] libphy: ipq8064_mdio_bus: probed
[ 3.054425] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio
-mii
[ 3.895953] ar8327: qca,phy-rgmii-en is not specified
[ 3.896544] libphy: Fixed MDIO Bus: probed
[ 3.900640] i2c /dev entries driver
[ 3.906418] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operatio
ns
[ 3.907565] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operatio
ns
[ 3.915471] sdhci: Secure Digital Host Controller Interface driver
[ 3.922029] sdhci: Copyright(c) Pierre Ossman
[ 3.928277] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.935000] NET: Registered protocol family 10
[ 3.940614] Segment Routing with IPv6
[ 3.942689] NET: Registered protocol family 17
[ 3.946429] Bridge firewalling registered
[ 3.951008] 8021q: 802.1Q VLAN Support v1.8
[ 3.954830] Registering SWP/SWPB emulation handler
[ 3.982325] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 3.995992] s1a: Bringing 0uV into 1050000-1050000uV
[ 3.996259] s1a: supplied by regulator-dummy
[ 4.000243] s1b: Bringing 0uV into 1050000-1050000uV
[ 4.004468] s1b: supplied by regulator-dummy
[ 4.009432] s2a: Bringing 0uV into 800000-800000uV
[ 4.013674] s2a: supplied by regulator-dummy
[ 4.018303] s2b: Bringing 0uV into 800000-800000uV
[ 4.022701] s2b: supplied by regulator-dummy
[ 4.035957] ubi0: attaching mtd14
[ 4.304375] ubi0: scanning is finished
[ 4.314466] ubi0: attached mtd14 (name "rootfs1", size 37 MiB)
[ 4.314487] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.319248] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.326038] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.332966] ubi0: good PEBs: 296, bad PEBs: 0, corrupted PEBs: 0
[ 4.339737] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12
8
[ 4.345920] ubi0: max/mean erase counter: 46/33, WL threshold: 4096, image se
quence number: 1594157890
[ 4.353014] ubi0: available PEBs: 0, total reserved PEBs: 296, PEBs reserved
for bad PEB handling: 20
[ 4.363068] block ubiblock0_0: created from ubi0:0(rootfs)
[ 4.363300] ubi0: background thread "ubi_bgt0d" started, PID 66
[ 4.371600] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 4.371606] hctosys: unable to open rtc device (rtc0)
[ 4.403169] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ign
ored
[ 4.403204] unable to read xattr id index table
[ 4.413420] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 4.417575] Freeing unused kernel memory: 1024K
[ 4.439439] Run /sbin/init as init process
[ 4.914233] init: Console is alive
[ 4.914364] init: - watchdog -
[ 6.306090] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.382020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.385179] SCSI subsystem initialized
[ 6.397586] ehci-fsl: Freescale EHCI Host controller driver
[ 6.398775] ehci-platform: EHCI generic platform driver
[ 6.405888] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.407667] ohci-platform: OHCI generic platform driver
[ 6.415679] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[ 6.418618] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[ 6.424440] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[ 6.430568] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[ 6.438231] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[ 6.442146] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[ 6.447874] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[ 6.454049] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[ 6.467061] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[ 6.560306] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[ 6.659243] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.659310] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu
mber 1
[ 6.663924] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100
quirks 0x0000000002010010
[ 6.671372] xhci-hcd xhci-hcd.0.auto: irq 46, io mem 0x11000000
[ 6.681690] hub 1-0:1.0: USB hub found
[ 6.686505] hub 1-0:1.0: 1 port detected
[ 6.690922] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 6.694356] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu
mber 2
[ 6.699714] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 6.707282] usb usb2: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 6.714206] hub 2-0:1.0: USB hub found
[ 6.722146] hub 2-0:1.0: 1 port detected
[ 6.725883] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.729771] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu
mber 3
[ 6.735117] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100
quirks 0x0000000002010010
[ 6.742626] xhci-hcd xhci-hcd.1.auto: irq 47, io mem 0x10000000
[ 6.753100] hub 3-0:1.0: USB hub found
[ 6.757835] hub 3-0:1.0: 1 port detected
[ 6.761877] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.765713] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus nu
mber 4
[ 6.771067] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 6.778695] usb usb4: We don't know the algorithms for LPM for this host, dis
abling LPM.
[ 6.785498] hub 4-0:1.0: USB hub found
[ 6.793495] hub 4-0:1.0: 1 port detected
[ 6.799611] usbcore: registered new interface driver usb-storage
[ 6.801150] kmodloader: done loading kernel modules from /etc/modules-boot.d/
*
[ 6.809877] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 19.212621] mount_root: loading kmods from internal overlay
[ 19.248093] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 19.251649] kmodloader: done loading kernel modules from //etc/modules-boot.d
/*
[ 19.262728] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(RE
AD) flags 0x80700 phys_seg 4 prio class 0
[ 19.263775] blk_update_request: I/O error, dev mtdblock0, sector 8 op 0x0:(RE
AD) flags 0x80700 phys_seg 3 prio class 0
[ 19.273408] blk_update_request: I/O error, dev mtdblock0, sector 16 op 0x0:(R
EAD) flags 0x80700 phys_seg 2 prio class 0
[ 19.288434] blk_update_request: I/O error, dev mtdblock0, sector 24 op 0x0:(R
EAD) flags 0x80700 phys_seg 1 prio class 0
[ 19.308459] blk_update_request: I/O error, dev mtdblock0, sector 0 op 0x0:(RE
AD) flags 0x0 phys_seg 1 prio class 0
[ 19.308488] Buffer I/O error on dev mtdblock0, logical block 0, async page re
ad
[ 19.383340] blk_update_request: I/O error, dev mtdblock0, sector 32 op 0x0:(R
EAD) flags 0x80700 phys_seg 8 prio class 0
[ 19.384425] blk_update_request: I/O error, dev mtdblock0, sector 40 op 0x0:(R
EAD) flags 0x80700 phys_seg 7 prio class 0
[ 19.394033] blk_update_request: I/O error, dev mtdblock0, sector 48 op 0x0:(R
EAD) flags 0x80700 phys_seg 6 prio class 0
[ 19.404810] blk_update_request: I/O error, dev mtdblock0, sector 56 op 0x0:(R
EAD) flags 0x80700 phys_seg 5 prio class 0
[ 19.415553] blk_update_request: I/O error, dev mtdblock0, sector 64 op 0x0:(R
EAD) flags 0x80700 phys_seg 4 prio class 0
[ 19.429378] Buffer I/O error on dev mtdblock0, logical block 1, async page re
ad
[ 19.443557] Buffer I/O error on dev mtdblock1, logical block 0, async page re
ad
[ 19.456520] Buffer I/O error on dev mtdblock1, logical block 1, async page re
ad
[ 19.761664] Buffer I/O error on dev mtdblock2, logical block 0, async page re
ad
[ 19.772277] Buffer I/O error on dev mtdblock2, logical block 1, async page re
ad
[ 19.778166] Buffer I/O error on dev mtdblock3, logical block 0, async page re
ad
[ 19.781695] Buffer I/O error on dev mtdblock3, logical block 0, async page re
ad
[ 19.791375] Buffer I/O error on dev mtdblock4, logical block 0, async page re
ad
[ 19.804389] Buffer I/O error on dev mtdblock4, logical block 0, async page re
ad
[ 19.918174] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 19.928357] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 171
[ 19.993120] UBIFS (ubi0:1): recovery needed
[ 20.057194] UBIFS (ubi0:1): recovery completed
[ 20.057280] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root
fs_data"
[ 20.060639] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u
nit sizes: 2048 bytes/2048 bytes
[ 20.068495] UBIFS (ubi0:1): FS size: 25268224 bytes (24 MiB, 199 LEBs), journ
al size 1269760 bytes (1 MiB, 10 LEBs)
[ 20.078405] UBIFS (ubi0:1): reserved for root: 1193480 bytes (1165 KiB)
[ 20.088659] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 10D33
955-39A5-4B54-B19A-33548C264BC0, small LPT model
[ 20.096192] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 20.106795] block: unable to load configuration (fstab: Entry not found)
[ 20.113500] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 20.120490] block: unable to load configuration (fstab: Entry not found)
[ 20.126700] block: attempting to load /etc/config/fstab
[ 20.134018] block: unable to load configuration (fstab: Entry not found)
[ 20.138497] block: no usable configuration
[ 20.145433] UBIFS (ubi0:1): un-mount UBI device 0
[ 20.149332] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 20.158496] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 20.161469] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 172
[ 20.260689] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root
fs_data"
[ 20.260715] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u
nit sizes: 2048 bytes/2048 bytes
[ 20.267495] UBIFS (ubi0:1): FS size: 25268224 bytes (24 MiB, 199 LEBs), journ
al size 1269760 bytes (1 MiB, 10 LEBs)
[ 20.277462] UBIFS (ubi0:1): reserved for root: 1193480 bytes (1165 KiB)
[ 20.287702] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 10D33
955-39A5-4B54-B19A-33548C264BC0, small LPT model
[ 20.750633] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 20.750739] block: unable to load configuration (fstab: Entry not found)
[ 20.756431] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 20.763484] block: unable to load configuration (fstab: Entry not found)
[ 20.769766] block: attempting to load /etc/config/fstab
[ 20.776498] block: unable to load configuration (fstab: Entry not found)
[ 20.781518] block: no usable configuration
[ 20.790492] mount_root: overlay filesystem has not been fully initialized yet
[ 20.796513] mount_root: switching to ubifs overlay
[ 20.821011] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 20.886264] procd: - early -
[ 20.886352] procd: - watchdog -
[ 21.487594] procd: - watchdog -
[ 21.488888] procd: - ubus -
[ 21.543101] procd: - init -
Please press Enter to activate this console.
[ 22.021126] urngd: v1.0.2 started.
[ 22.124085] kmodloader: loading kernel modules from /etc/modules.d/*
[ 22.149151] Key type cifs.idmap registered
[ 22.156448] NET: Registered protocol family 15
[ 22.157853] Initializing XFRM netlink socket
[ 22.161272] tun: Universal TUN/TAP device driver, 1.6
[ 22.167346] **********************************************************
[ 22.169248] * Driver :NSS GMAC Driver - RTL v(3.72a)
[ 22.175571] * Version :1.0
[ 22.180743] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All ri
ghts reserved.
[ 22.183823] **********************************************************
[ 22.193873] 8<--- cut here ---
[ 22.198568] Unable to handle kernel NULL pointer dereference at virtual addre
ss 00000038
[ 22.201535] pgd = 88d48686
[ 22.209826] [00000038] *pgd=4e430835, *pte=00000000, *ppte=00000000
[ 22.212299] Internal error: Oops: 17 [#1] SMP ARM
[ 22.218455] Modules linked in: qca_nss_gmac(+) tunnel4 ip_tunnel tun xfrm_use
r xfrm_ipcomp af_key xfrm_algo vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls
_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha512_generic sha1_generic seqiv md5
md4 echainiv ecb des_generic libdes ctr cmac ccm cbc authenc arc4 usb_storage le
ds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom ohci_platform ohci_hcd ph
y_qcom_ipq806x_usb ahci fsl_mph_dr_of ehci_platform ehci_fsl sd_mod ahci_platfor
m libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbc
ache jbd2 crc32c_generic
[ 22.251956] CPU: 0 PID: 400 Comm: kmodloader Not tainted 5.4.91 #0
[ 22.274186] Hardware name: Generic DT based system
[ 22.280270] PC is at phy_attach_direct+0x30/0x290
[ 22.285037] LR is at phy_connect_direct+0x24/0x68
[ 22.289809] pc : [<c06c9190>] lr : [<c06c9474>] psr: a0000013
[ 22.294498] sp : cc453c10 ip : 00000002 fp : cddfd164
[ 22.300575] r10: cd035000 r9 : 00000000 r8 : 00000000
[ 22.305781] r7 : 00000008 r6 : ccfe3000 r5 : ccfe3000 r4 : cd035c00
[ 22.310993] r3 : 00000000 r2 : 00000000 r1 : cd035c00 r0 : ccfe3000
[ 22.317590] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 22.324102] Control: 10c5787d Table: 4e4c806a DAC: 00000051
[ 22.331305] Process kmodloader (pid: 400, stack limit = 0x29181dfb)
[ 22.337034] Stack: (0xcc453c10 to 0xcc454000)
[ 22.343114] 3c00: cd035c00 bf322690 ccfe3
000 bf322690
[ 22.347638] 3c20: 00000008 00000000 ccfe34c0 c06c9474 cd035c00 cc453cc4 ccfe3
000 c06c9510
[ 22.355797] 3c40: ccfe3000 c0c04e48 00000000 00000008 bf326744 bf31f464 00000
004 00000000
[ 22.363956] 3c60: bf3260d0 c07569c8 ffffffff 00000001 00000000 cd959600 c0c67
6c4 37200000
[ 22.372116] 3c80: 373fffff cddfd1b8 00000200 00000000 00000000 00000000 00000
000 00000004
[ 22.380276] 3ca0: 00000001 00000000 00000008 c0755a88 cc67f840 000003e8 00000
001 00000000
[ 22.388437] 3cc0: 00000000 30303733 30303030 69646d2e 696d2d6f 34303a69 bf326
000 0000001e
[ 22.396596] 3ce0: cd954d80 c04d6c1c 00000000 cc67f840 cc67f780 cc67f780 cc67f
840 cd954d80
[ 22.404756] 3d00: c0a4f148 991b5ec6 bf3260d0 cd959610 bf3260d0 c0c6625c 00000
000 00000000
[ 22.412915] 3d20: bf3260d0 0000001e c0c04e48 c0663784 c0c66264 cd959610 c0c66
25c c0661a98
[ 22.421074] 3d40: cd959610 00000000 bf3260d0 00000000 00000000 cc67ea24 bf326
580 c06620ac
[ 22.429235] 3d60: 00000000 bf3260d0 cd959610 c0662114 cd959610 bf3260d0 c0662
0b4 c065fc94
[ 22.437394] 3d80: cd809b58 cd9517b4 bf3260d0 cced4980 c0c233e8 c0660e00 bf325
26c bf326740
[ 22.445554] 3da0: bf3260d0 bf3260d0 c0c32014 ffffe000 bf32b098 c0662728 bf326
740 c0c32014
[ 22.453714] 3dc0: ffffe000 bf32b06c c0c04e48 bf32b0e8 c0c04e48 c03027a4 80400
03f cc65db40
[ 22.461873] 3de0: c0a62000 cc65db40 00000000 cd801e00 cc65dbc0 cdfbf514 cd801
e00 cc65dbc0
[ 22.470032] 3e00: 8040003e cc67ea00 00000001 c0442aa4 00000001 cd801e00 cc65d
b40 cdfbf514
[ 22.478193] 3e20: cc67ea00 991b5ec6 bf326580 cc67eac0 cf0ed000 cc67ea00 00000
001 c03a2fcc
[ 22.486352] 3e40: 00000001 cc453f34 cc453f34 00000001 cf0ed000 c03a52bc bf326
58c 00007fff
[ 22.494512] 3e60: bf326580 c03a2268 cd8044e8 bf3265c8 cc569818 c03a1770 c09c6
1e4 c09c6330
[ 22.502674] 3e80: bf32658c c0c04e48 00000000 c09c613c c09c6194 c0c04e48 cc65d
bc0 bf3254b4
[ 22.510832] 3ea0: 00000001 cc65db40 0000000f 0000000f bf324018 00000009 bf324
084 00000002
[ 22.518991] 3ec0: 00000000 00000000 6e72656b 00006c65 00000000 00000000 00000
000 00000000
[ 22.527150] 3ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000
000 00000000
[ 22.535311] 3f00: 00000000 991b5ec6 00000000 0000e4bc cf0fb4bc 00000000 01330
4cc ffffe000
[ 22.543470] 3f20: 000129d5 00000051 00000000 c03a5684 00000000 cf0f457b cf0f4
c80 cf0ed000
[ 22.551631] 3f40: 0000e4bc cf0fadb4 cf0fabec cf0f73f4 0000a000 0000af20 00004
ad8 0000c1ac
[ 22.559790] 3f60: 00000000 00000000 00000000 00004ac8 0000002a 0000002b 00000
022 00000000
[ 22.567948] 3f80: 00000017 00000000 00000000 00000000 00000004 00000080 c0301
204 cc452000
[ 22.576109] 3fa0: 00000080 c0301000 00000000 00000000 01322010 0000e4bc 00012
9d5 00000013
[ 22.584269] 3fc0: 00000000 00000000 00000004 00000080 0000e4bc 00000000 0131d
cf0 00000000
[ 22.592429] 3fe0: bee33d14 bee33cf8 00011e14 b6eeff24 60000010 01322010 00000
000 00000000
[ 22.600589] [<c06c9190>] (phy_attach_direct) from [<c06c9474>] (phy_connect_d
irect+0x24/0x68)
[ 22.608743] [<c06c9474>] (phy_connect_direct) from [<c06c9510>] (phy_connect+
0x58/0x9c)
[ 22.617270] [<c06c9510>] (phy_connect) from [<bf31f464>] (nss_gmac_probe+0x64
0/0x72c [qca_nss_gmac])
[ 22.625104] [<bf31f464>] (nss_gmac_probe [qca_nss_gmac]) from [<c0663784>] (p
latform_drv_probe+0x40/0x80)
[ 22.634442] [<c0663784>] (platform_drv_probe) from [<c0661a98>] (really_probe
+0x214/0x37c)
[ 22.643900] [<c0661a98>] (really_probe) from [<c06620ac>] (device_driver_atta
ch+0x6c/0x74)
[ 22.652057] [<c06620ac>] (device_driver_attach) from [<c0662114>] (__driver_a
ttach+0x60/0xd0)
[ 22.660305] [<c0662114>] (__driver_attach) from [<c065fc94>] (bus_for_each_de
v+0x6c/0x9c)
[ 22.668898] [<c065fc94>] (bus_for_each_dev) from [<c0660e00>] (bus_add_driver
+0x1dc/0x1ec)
[ 22.677057] [<c0660e00>] (bus_add_driver) from [<c0662728>] (driver_register+
0x84/0x11c)
[ 22.685232] [<c0662728>] (driver_register) from [<bf32b06c>] (nss_gmac_regist
er_driver+0x6c/0x98 [qca_nss_gmac])
[ 22.693496] [<bf32b06c>] (nss_gmac_register_driver [qca_nss_gmac]) from [<bf3
2b0e8>] (init_module+0x50/0xf68 [qca_nss_gmac])
[ 22.703640] [<bf32b0e8>] (init_module [qca_nss_gmac]) from [<c03027a4>] (do_o
ne_initcall+0x90/0x1fc)
[ 22.714828] [<c03027a4>] (do_one_initcall) from [<c03a2fcc>] (do_init_module+
0x64/0x234)
[ 22.723935] [<c03a2fcc>] (do_init_module) from [<c03a52bc>] (load_module+0x20
74/0x22d4)
[ 22.732007] [<c03a52bc>] (load_module) from [<c03a5684>] (sys_init_module+0x1
68/0x19c)
[ 22.739731] [<c03a5684>] (sys_init_module) from [<c0301000>] (ret_fast_syscal
l+0x0/0x54)
[ 22.747714] Exception stack(0xcc453fa8 to 0xcc453ff0)
[ 22.755962] 3fa0: 00000000 00000000 01322010 0000e4bc 00012
9d5 00000013
[ 22.760918] 3fc0: 00000000 00000000 00000004 00000080 0000e4bc 00000000 0131d
cf0 00000000
[ 22.769073] 3fe0: bee33d14 bee33cf8 00011e14 b6eeff24
[ 22.777231] Code: e58da018 e58de01c 1595334c e591a108 (15933038)
[ 22.782338] ---[ end trace 94048e2620abfcb1 ]---
[ 22.788392] Kernel panic - not syncing: Fatal exception
[ 22.793972] CPU1: stopping
[ 22.797983] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 5.4.91
#0
[ 22.800756] Hardware name: Generic DT based system
[ 22.807985] [<c030f954>] (unwind_backtrace) from [<c030b974>] (show_stack+0x1
4/0x20)
[ 22.812848] [<c030b974>] (show_stack) from [<c08fbb20>] (dump_stack+0x94/0xa8
)
[ 22.820741] [<c08fbb20>] (dump_stack) from [<c030eb80>] (handle_IPI+0x184/0x1
b8)
[ 22.827778] [<c030eb80>] (handle_IPI) from [<c05dbe90>] (gic_handle_irq+0xb4/
0xb8)
[ 22.835322] [<c05dbe90>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0
x90)
[ 22.842686] Exception stack(0xcd85bf18 to 0xcd85bf60)
[ 22.850244] bf00: 00000
000 00000005
[ 22.855303] bf20: 0d2a0000 cdde0a80 cd036800 00000001 cdddfe30 00000005 00000
005 00000000
[ 22.863462] bf40: 4ea03360 4e5953a0 00000015 cd85bf68 c072d248 c072d24c 00000
013 ffffffff
[ 22.871613] [<c0301a8c>] (__irq_svc) from [<c072d24c>] (cpuidle_enter_state+0
x94/0x498)
[ 22.879767] [<c072d24c>] (cpuidle_enter_state) from [<c072d694>] (cpuidle_ent
er+0x30/0x4c)
[ 22.887579] [<c072d694>] (cpuidle_enter) from [<c034ac04>] (do_idle+0x1d8/0x2
40)
[ 22.895909] [<c034ac04>] (do_idle) from [<c034af14>] (cpu_startup_entry+0x1c/
0x20)
[ 22.903459] [<c034af14>] (cpu_startup_entry) from [<423024cc>] (0x423024cc)
[ 22.910834] Rebooting in 1 seconds..
Hi, completely new to the custom NSS build here and I've tried the latest commit (45f5433) on my R7800 but occasionally got the following syslog:
Mon Jan 25 15:56:10 2021 kern.err kernel: [34716.128002] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:10 2021 kern.warn kernel: [34716.128012] Failed [2] to send skb [len: 70, protocol: 0x0] to NSS!
Mon Jan 25 15:56:11 2021 kern.err kernel: [34716.844153] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:11 2021 kern.err kernel: [34716.844387] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:12 2021 kern.err kernel: [34717.743809] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:12 2021 kern.err kernel: [34717.833796] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:12 2021 kern.err kernel: [34717.833934] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:13 2021 kern.err kernel: [34718.394071] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:13 2021 kern.err kernel: [34718.394309] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:13 2021 kern.err kernel: [34718.493431] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:13 2021 kern.err kernel: [34718.493523] wlan0-1: NSS TX failed with error: NSS_TX_FAILURE_QUEUE
Mon Jan 25 15:56:13 2021 kern.warn kernel: [34718.665068] Failed [2] to send skb [len: 98, protocol: 0x0] to NSS!
Mon Jan 25 15:56:13 2021 kern.warn kernel: [34718.766340] Failed [2] to send skb [len: 70, protocol: 0x0] to NSS!
Mon Jan 25 15:56:13 2021 kern.warn kernel: [34718.766507] Failed [2] to send skb [len: 70, protocol: 0x0] to NSS!
Mon Jan 25 15:56:17 2021 kern.warn kernel: [34722.423258] net_ratelimit: 62 callbacks suppressed
The router itself doesn't crash or reboot but I don't know what's going on with the NSS driver. Is it safe to ignore these errors?
Anyone getting these in the syslog and kernel log? It seems to be accompanied with degraded performance through the WAN. I'm going to disable hardware offloading for now.
Wed Jan 27 09:23:53 2021 kern.err kernel: [24745.203388] wlan5ghz: NSS TX failed with error: NSS_TX_FAILURE_TOO_SHORT
Wed Jan 27 09:24:56 2021 kern.err kernel: [24808.747737] wlan2ghz: NSS TX failed with error: NSS_TX_FAILURE_TOO_SHORT
https://morfikov.github.io/post/nat-reflection-oraz-nat-loopback-w-openwrt/
hello friend, do you understand this? this is what makes what i need work. In Kong I did not create any special rule, the same is missing a package that performs this.
config include 'qcanssecm'
option type 'script'
option path '/etc/firewall.d/qca-nss-ecm'
option family 'any'
option reload '1'
what does that do exactly? etc/config/firewall
Hej @ACwifidude,
to night, since 04:28 (CEST), i get several times a second:
[401960.882149] ath10k_pci 0001:01:00.0: SWBA overrun on vdev 0, skipped old beacon
And every now and then:
[402454.150120] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[402454.150166] rcu: 1-...0: (1 GPs behind) idle=056/1/0x40000000 softirq=11860868/11860868 fqs=21830
[402454.155202] (detected by 0, t=52542 jiffies, g=34391849, q=4661)
[402454.164313] Sending NMI from CPU 0 to CPUs 1:
A restart helps.
I use R7800-20210124-MasterNSS.
Cheers from Germany,
Nico
@ACwifidude the version from 1/24 just rebooted after less than 5 days. Light load only me reading the fake news NYTimes and my wife browsing zulilly.
Is the memory oops logging enabled in the 1/24 version? Do I just need to set it up to log in 'local startup', or do I have to build a version to be able to log it.
The only other issue I note is that my time based firewall rules (turing off internet for specific devices at specific times) no longer work. I have made no changes to the firewall rules. I just keep the settings when I upgrade the image. It was working, but recently, I notice that It no longer shuts down the internet to the MAC addresses of interest. I noticed that I cannot enable any of the time based rules from the UI. Typical rule:
config rule
option stop_time '07:00:00'
option target 'REJECT'
option extra '--weekdays Fri'
option name 'Kids-Friday'
option src 'lan'
option dest 'wan'
list src_mac 'xx:xx:xx:xx:xx:xx'
list src_mac 'xx:xx:xx:xx:xx:xx'
list src_mac 'xx:xx:xx:xx:xx:xx'
list src_mac 'xx:xx:xx:xx:xx:xx'
list src_mac 'xx:xx:xx:xx:xx:xx'
list src_mac 'xx:xx:xx:xx:xx:xx'
option enabled '0'
option start_time '23:59:00'
The Luci page looks like this:
If I select 'Enable' then 'Save and apply', it says that there are no changes to apply.
Local time is set as is my timezone. If I select the enable the rule than save, it just unselects it.
If I edit the /etc/config/firewall to enable the rules then run "/etc/init.d/firewall reload" and go back to the web interface, the rules now show as 'enabled'. I guess they will work again. It is just that I cannot enable them from the Luci UI.
There is a known bug for firewall in master. I’ll have to find the post - somebody has written a fix.... it just isn’t in master yet.
Build based on r15598+80-1fb413e657 (C2600) - still not working WAN (eth0) - No IP address.
dmesg at https://gist.github.com/imkebe/a293e21aff954f4b13531668028aa52a
5Ghz WiFi was working. Not sure why 2,4Ghz not (probably not included firmware)
How about yesterday’s build?
New build has the cryptodev package, a fix that might help ipq8064 devices, and a 600mHz build for r7800 users with crashes (see if it is more stable). Enjoy!
1 Like
Thanks my Friend for cryptodev package - you are very receptive to user input and I for one appreciate that attitude along with your dedication and efforts
Peace and Stay safe
2 Likes
Looks like putting the interface in promiscuous mode could work with custom internal DNS configurations. Something like this:
ifconfig br-lan promisc
You can turn it off like this:
ifconfig br-lan -promisc
Works! THANKS! 
Now can use the DDNS-Alias with port forwarding from internal.
I am also new to this build. I just pulled a C2600 out of my junk bin, is there a stable release with nss from someone? (not having a working wan port would suck, and forgive me for not reading the whole thread). I don't mind pitching in on new features, just
would like to start with something that mostly worked....
Nobody has reported in on the last two builds for the C2600. All the settings are based off the successful 31 December build.
Feel free to try it out and see what you think.