Hi Team,
Below my dmesg output using the lede r2220+24
_________
/ /\ _ ___ ___ ___
/ LE / \ | | | __| \| __|
/ DE / \ | |__| _|| |) | _|
/________/ LE \ |____|___|___/|___| lede-project.org \ \ DE /
\ LE \ / -----------------------------------------------------------
\ DE \ / Reboot (HEAD, r2220+24)
\________\/
root@mulambo:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.32 (hyniu@o2.pl) (gcc version 5.4.0 (LEDE GCC 5.4.0 r2098+1) ) #0 SMP Sat Nov 19 16:57:09 2016
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: TP-Link Archer C2600
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c07f1480, node_mem_map ddc39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ddc0f000 s13824 r8192 d23040 u45056
[ 0.000000] pcpu-alloc: s13824 r8192 d23040 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)[ 0.000000] Memory: 480536K/491520K available (4261K kernel code, 246K rwdata, 1548K rodata, 220K init, 228K bss, 10984K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0208000 - 0xc07b49d8 (5811 kB)
.init : 0xc07b5000 - 0xc07ec000 ( 220 kB)
.data : 0xc07ec000 - 0xc0829980 ( 247 kB)
.bss : 0xc082c000 - 0xc0865080 ( 229 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000024] Switching to timer-based delay loop, resolution 160ns
[ 0.000209] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000232] pid_max: default: 32768 minimum: 301
[ 0.000331] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000346] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000950] CPU: Testing write buffer coherency: ok
[ 0.001307] Setting up static identity map for 0x42208280 - 0x422082d8
[ 0.004357] Brought up 2 CPUs
[ 0.004376] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004386] CPU: All CPU(s) started in SVC mode.
[ 0.013580] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.013817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.013961] pinctrl core: initialized pinctrl subsystem
[ 0.015342] NET: Registered protocol family 16
[ 0.016597] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.041483] cpuidle: using governor ladder
[ 0.072497] cpuidle: using governor menu
[ 0.084419] gpiochip_add: registered GPIOs 0 to 68 on device: 800000.pinmux
[ 0.084441] GPIO chip 800000.pinmux: created GPIO range 0->68 ==> 800000.pinmux PIN 0->68
[ 0.085949] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 0.126740] pps_core: LinuxPPS API ver. 1 registered
[ 0.126756] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.126799] PTP clock support registered
[ 0.127997] clocksource: Switched to clocksource dg_timer
[ 0.129252] NET: Registered protocol family 2
[ 0.129812] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.129855] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.129907] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.129952] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.129974] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.130170] NET: Registered protocol family 1
[ 0.130231] PCI: CLS 0 bytes, default 64
[ 0.131489] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.131587] No memory allocated for crashlog
[ 0.138715] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.138741] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.141578] io scheduler noop registered
[ 0.141599] io scheduler deadline registered (default)
[ 0.142217] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_export/usb1_power[0]' - status (0)
[ 0.142358] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_export/usb2_power[0]' - status (0)
[ 0.142463] gpio-export gpio_export: 2 gpio(s) exported
[ 0.142974] qcom-pcie 1b500000.pci: GPIO lookup for consumer perst
[ 0.142991] qcom-pcie 1b500000.pci: using device tree for GPIO lookup
[ 0.143013] of_get_named_gpiod_flags: parsed 'perst-gpios' property of node '/soc/pci@1b500000[0]' - status (0)
[ 0.143099] 1b500000.pci supply vdda not found, using dummy regulator
[ 0.143184] 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.143264] 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.143679] PCI host bridge /soc/pci@1b500000 ranges:
[ 0.143717] IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.143740] MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.176026] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.176047] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.176066] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.176080] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff][ 0.176095] pci_bus 0000:00: scanning bus
[ 0.176140] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.176246] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
[ 0.176300] pci 0000:00:00.0: supports D1
[ 0.176316] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.176334] pci 0000:00:00.0: PME# disabled
[ 0.176562] pci_bus 0000:00: fixups for bus
[ 0.176587] PCI: bus0: Fast back to back transfers disabled
[ 0.176605] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.176740] pci_bus 0000:01: scanning bus
[ 0.176886] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.177200] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.177565] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
[ 0.177943] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.177980] pci 0000:01:00.0: PME# disabled
[ 0.178344] pci_bus 0000:01: fixups for bus
[ 0.178416] PCI: bus1: Fast back to back transfers disabled
[ 0.178431] pci_bus 0000:01: bus scan returning with max=01
[ 0.178451] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.178471] pci_bus 0000:00: bus scan returning with max=01
[ 0.178536] pci 0000:00:00.0: fixup irq: got 133
[ 0.178549] pci 0000:00:00.0: assigning IRQ 133
[ 0.178611] pci 0000:01:00.0: fixup irq: got 133
[ 0.178624] pci 0000:01:00.0: assigning IRQ 133
[ 0.178686] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.178709] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.178814] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.178834] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.179175] aer 0000:00:00.0:pcie02: service driver aer loaded
[ 0.179423] qcom-pcie 1b700000.pci: GPIO lookup for consumer perst
[ 0.179436] qcom-pcie 1b700000.pci: using device tree for GPIO lookup
[ 0.179457] of_get_named_gpiod_flags: parsed 'perst-gpios' property of node '/soc/pci@1b700000[0]' - status (0)
[ 0.179529] 1b700000.pci supply vdda not found, using dummy regulator
[ 0.179611] 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.179691] 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.180089] PCI host bridge /soc/pci@1b700000 ranges:
[ 0.180121] IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.180140] MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.209104] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.209124] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.209140] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff][ 0.209155] pci_bus 0001:00: scanning bus
[ 0.209195] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.209283] pci 0001:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
[ 0.209329] pci 0001:00:00.0: supports D1
[ 0.209344] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.209361] pci 0001:00:00.0: PME# disabled
[ 0.209587] pci_bus 0001:00: fixups for bus
[ 0.209608] PCI: bus0: Fast back to back transfers disabled
[ 0.209624] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.209758] pci_bus 0001:01: scanning bus
[ 0.209907] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[ 0.210219] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.210582] pci 0001:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
[ 0.210958] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.210996] pci 0001:01:00.0: PME# disabled
[ 0.211291] pci_bus 0001:01: fixups for bus
[ 0.211352] PCI: bus1: Fast back to back transfers disabled
[ 0.211365] pci_bus 0001:01: bus scan returning with max=01
[ 0.211382] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.211401] pci_bus 0001:00: bus scan returning with max=01
[ 0.211446] pcieport 0000:00:00.0: fixup irq: got 133
[ 0.211459] pcieport 0000:00:00.0: assigning IRQ 133
[ 0.211519] pci 0000:01:00.0: fixup irq: got 133
[ 0.211531] pci 0000:01:00.0: assigning IRQ 133
[ 0.211598] pci 0001:00:00.0: fixup irq: got 166
[ 0.211610] pci 0001:00:00.0: assigning IRQ 166
[ 0.211668] pci 0001:01:00.0: fixup irq: got 166
[ 0.211680] pci 0001:01:00.0: assigning IRQ 166
[ 0.211732] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.211754] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.211854] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.211872] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.212192] aer 0001:00:00.0:pcie02: service driver aer loaded
[ 0.214418] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.215464] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[ 0.216490] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.219388] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.219496] msm_serial 16340000.serial: uartclk = 1843200
[ 0.219558] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 167, base_baud = 115200) is a MSM
[ 0.219594] msm_serial: console setup on port #0
[ 0.865839] console [ttyMSM0] enabled
[ 0.870650] msm_serial: driver initialized
[ 0.880434] loop: module loaded
[ 0.881703] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.882456] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/gsbi@1a200000/spi@1a280000[0]' - status (0)
[ 0.883733] m25p80 spi32766.0: mx25u25635f (32768 Kbytes)
[ 0.889949] 25 ofpart partitions found on MTD device spi32766.0
[ 0.895054] Creating 25 MTD partitions on "spi32766.0":
[ 0.900879] 0x000000000000-0x000000020000 : "SBL1"
[ 0.907024] 0x000000020000-0x000000040000 : "MIBIB"
[ 0.911898] 0x000000040000-0x000000060000 : "SBL2"
[ 0.916589] 0x000000060000-0x000000090000 : "SBL3"
[ 0.921518] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
[ 0.926193] 0x0000000a0000-0x0000000b0000 : "SSD"
[ 0.931280] 0x0000000b0000-0x0000000e0000 : "TZ"
[ 0.936187] 0x0000000e0000-0x000000100000 : "RPM"
[ 0.940981] 0x000000100000-0x000000170000 : "fs-uboot"
[ 0.945463] 0x000000170000-0x0000001b0000 : "uboot-env"
[ 0.950603] 0x0000001b0000-0x0000001f0000 : "radio"
[ 0.955511] 0x0000001f0000-0x0000003f0000 : "os-image"
[ 0.960606] 0x0000003f0000-0x000001ef0000 : "rootfs"
[ 0.965706] mtd: device 12 (rootfs) set to be root filesystem
[ 0.970168] 1 squashfs-split partitions found on MTD device rootfs
[ 0.975526] 0x0000007a0000-0x000001ef0000 : "rootfs_data"
[ 0.982628] 0x000001ef0000-0x000001ef0200 : "default-mac"
[ 0.988028] 0x000001ef0200-0x000001ef0400 : "pin"
[ 0.993391] 0x000001ef0400-0x000001f00000 : "product-info"
[ 0.998136] 0x000001f00000-0x000001f10000 : "partition-table"
[ 1.003370] 0x000001f10000-0x000001f20000 : "soft-version"
[ 1.009516] 0x000001f20000-0x000001f30000 : "support-list"
[ 1.014789] 0x000001f30000-0x000001f40000 : "profile"
[ 1.020359] 0x000001f40000-0x000001f50000 : "default-config"
[ 1.025401] 0x000001f50000-0x000001f90000 : "user-config"
[ 1.030951] 0x000001f90000-0x000001fd0000 : "qos-db"
[ 1.036223] 0x000001fd0000-0x000001fe0000 : "usb-config"
[ 1.041345] 0x000001fe0000-0x000002000000 : "log"
[ 1.047338] libphy: Fixed MDIO Bus: probed
[ 1.050605] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/mdio[0]' - status (0)
[ 1.050630] of_get_named_gpiod_flags: parsed 'gpios' property of node '/soc/mdio[1]' - status (0)
[ 1.050646] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/soc/mdio[2]'
[ 1.050772] libphy: GPIO Bitbanged MDIO: probed
[ 1.076347] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 1.303507] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/soc/ethernet@37200000/fixed-link[0]'
[ 1.304090] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 1.304116] Ring mode enabled
[ 1.308112] DMA HW capability register supported
[ 1.311158] Enhanced/Alternate descriptors
[ 1.315837] Enabled extended descriptors
[ 1.319893] RX Checksum Offload Engine supported (type 2)
[ 1.324000] TX Checksum insertion supported
[ 1.329451] Wake-Up On Lan supported
[ 1.333807] Enable RX Mitigation via HW Watchdog Timer
[ 1.338387] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/soc/ethernet@37400000/fixed-link[0]'
[ 1.338880] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 1.342403] Ring mode enabled
[ 1.347608] DMA HW capability register supported
[ 1.350657] Enhanced/Alternate descriptors
[ 1.355333] Enabled extended descriptors
[ 1.359412] RX Checksum Offload Engine supported (type 2)
[ 1.363497] TX Checksum insertion supported
[ 1.368939] Wake-Up On Lan supported
[ 1.373302] Enable RX Mitigation via HW Watchdog Timer
[ 1.377493] i2c /dev entries driver
[ 1.387828] Speed bin: 0
[ 1.387849] PVS bin: 1
[ 1.389937] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 1.391628] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 1.399020] sdhci: Secure Digital Host Controller Interface driver
[ 1.406088] sdhci: Copyright(c) Pierre Ossman
[ 1.412438] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.418750] L2 @ QSB rate. Forcing new rate.
[ 1.422605] L2 @ 384000 KHz
[ 1.426867] CPU0 @ 800000 KHz
[ 1.429362] CPU1 @ QSB rate. Forcing new rate.
[ 1.432463] CPU1 @ 384000 KHz
[ 1.438413] NET: Registered protocol family 10
[ 1.441015] NET: Registered protocol family 17
[ 1.444183] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.448955] 8021q: 802.1Q VLAN Support v1.8
[ 1.461471] Registering SWP/SWPB emulation handler
[ 1.467351] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
[ 1.470809] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:1, -19
[ 1.478748] hctosys: unable to open rtc device (rtc0)
[ 1.500100] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
[ 1.500291] Freeing unused kernel memory: 220K (c07b5000 - c07ec000)
[ 1.721952] random: nonblocking pool is initialized
[ 3.159038] init: Console is alive
[ 3.159193] init: - watchdog -
[ 5.817096] usbcore: registered new interface driver usbfs
[ 5.817169] usbcore: registered new interface driver hub
[ 5.821601] usbcore: registered new device driver usb
[ 5.833177] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/wifi[0]' - status (0)
[ 5.833196] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/reset[0]' - status (0)
[ 5.833212] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/wps[0]' - status (0)
[ 5.833226] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/ledgeneral[0]' - status (0)
[ 5.836013] SCSI subsystem initialized
[ 5.838613] libata version 3.00 loaded.
[ 5.841673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.842082] ehci-platform: EHCI generic platform driver
[ 5.849690] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.852644] ohci-platform: OHCI generic platform driver
[ 5.960418] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.960500] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.965044] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
[ 5.972524] xhci-hcd xhci-hcd.0.auto: irq 169, io mem 0x11000000
[ 5.982324] hub 1-0:1.0: USB hub found
[ 5.987360] hub 1-0:1.0: 1 port detected
[ 5.991424] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.994941] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 6.000557] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.008908] hub 2-0:1.0: USB hub found
[ 6.016169] hub 2-0:1.0: 1 port detected
[ 6.020364] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.023779] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 6.029353] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
[ 6.036663] xhci-hcd xhci-hcd.1.auto: irq 170, io mem 0x10000000
[ 6.046060] hub 3-0:1.0: USB hub found
[ 6.051591] hub 3-0:1.0: 1 port detected
[ 6.055264] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 6.059225] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 6.064542] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.072488] hub 4-0:1.0: USB hub found
[ 6.080431] hub 4-0:1.0: 1 port detected
[ 6.084672] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/lan[0]' - status (0)
[ 6.084759] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/usb4[0]' - status (0)
[ 6.084828] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/usb2[0]' - status (0)
[ 6.084901] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/wps[0]' - status (0)
[ 6.084967] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/wan_red[0]' - status (0)
[ 6.085040] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/wan_blue[0]' - status (0)
[ 6.085114] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/status[0]' - status (0)
[ 6.085185] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/ledgnr[0]' - status (0)
[ 6.086497] usbcore: registered new interface driver usb-storage
[ 6.091901] init: - preinit -
[ 6.584065] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 6.624781] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 6.625194] scsi host0: usb-storage 4-1:1.0
[ 7.630325] scsi 0:0:0:0: Direct-Access Samsung D3 Station 0202 PQ: 0 ANSI: 6
[ 7.632359] sd 0:0:0:0: [sda] 732566645 4096-byte logical blocks: (3.00 TB/2.73 TiB)
[ 7.638498] sd 0:0:0:0: [sda] Write Protect is off
[ 7.645226] sd 0:0:0:0: [sda] Mode Sense: 2b 00 10 08
[ 7.645946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 7.731446] sda: sda1 sda2 sda3
[ 7.735697] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.403011] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 10.590235] mount_root: loading kmods from internal overlay
[ 13.018705] jffs2: notice: (169) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 13.019494] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab[ 13.161880] EXT4-fs (sda1): recovery complete
[ 13.162117] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
[ 13.236973] mount_root: switched to extroot
[ 13.239794] urandom-seed: Seeding with /etc/urandom.seed
[ 13.447740] procd: - early -
[ 13.447843] procd: - watchdog -
[ 14.116695] procd: - ubus -
[ 14.187785] procd: - init -
[ 16.111139] tun: Universal TUN/TAP device driver, 1.6
[ 16.111163] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.123795] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.128483] Netfilter messages via NETLINK v0.30.
[ 16.129889] ip_set: protocol 6
[ 16.143928] uhci_hcd: USB Universal Host Controller Interface driver
[ 16.145178] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[ 16.149451] Backport generated by backports.git backports-20160324-9-g0e38f5c
[ 16.174069] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 16.174150] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 16.174587] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 16.328618] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 16.328676] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 17.291933] Adding 131068k swap on /dev/sda2. Priority:-1 extents:1 across:131068k
[ 18.805607] EXT4-fs (sda3): recovery complete
[ 18.806953] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
[ 38.139856] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 38.585854] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 38.585889] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 38.595570] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[ 38.620734] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
[ 38.620933] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
[ 39.810314] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
[ 39.879084] ath: EEPROM regdomain: 0x0
[ 39.879107] ath: EEPROM indicates default country code should be used
[ 39.879124] ath: doing EEPROM country->regdmn map search
[ 39.879147] ath: country maps to regdmn code: 0x3a
[ 39.879166] ath: Country alpha2 being used: US
[ 39.879183] ath: Regpair used: 0x3a
[ 39.888459] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 39.888600] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 39.889213] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 40.019897] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
[ 40.019935] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 40.179308] firmware ath10k!pre-cal-pci-0001:01:00.0.bin: firmware_loading_store: map pages failed
[ 40.180405] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[ 40.187181] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 40.198662] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[ 40.204988] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
[ 40.213971] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
[ 41.396776] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
[ 41.459105] ath: EEPROM regdomain: 0x0
[ 41.459130] ath: EEPROM indicates default country code should be used
[ 41.459146] ath: doing EEPROM country->regdmn map search
[ 41.459170] ath: country maps to regdmn code: 0x3a
[ 41.459189] ath: Country alpha2 being used: US
[ 41.459206] ath: Regpair used: 0x3a
[ 41.477707] u32 classifier
[ 41.477743] input device check on
[ 41.479449] Actions configured
[ 41.486635] Mirror/redirect action on
[ 41.609451] Bridge firewalling registered
[ 41.610741] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 41.618063] nf_conntrack version 0.5.0 (7511 buckets, 30044 max)
[ 41.619261] ctnetlink v0.93: registering with nfnetlink.
[ 41.735687] xt_time: kernel timezone is -0000
[ 41.743367] PPP generic driver version 2.4.2
[ 41.745019] NET: Registered protocol family 24
[ 44.572630] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 44.580648] device eth1.3 entered promiscuous mode
[ 44.580672] device eth1 entered promiscuous mode
[ 44.587637] IPv6: ADDRCONF(NETDEV_UP): br-guest: link is not ready
[ 44.598071] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 45.274916] ath10k_pci 0001:01:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[ 45.274978] ath10k_pci 0000:01:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
[ 46.558395] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 46.608396] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 47.678453] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 47.679987] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 47.683329] br-lan: port 1(eth1) entered forwarding state
[ 47.689560] br-lan: port 1(eth1) entered forwarding state
[ 47.707668] device wlan1 entered promiscuous mode
[ 47.884924] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
[ 47.973046] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
[ 47.977072] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
[ 48.026495] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
[ 48.029622] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
[ 48.144920] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
[ 48.343589] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
[ 48.972970] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.973245] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 48.978002] br-guest: port 1(eth1.3) entered forwarding state
[ 48.984451] br-guest: port 1(eth1.3) entered forwarding state
[ 48.996515] device wlan0 entered promiscuous mode
[ 49.010405] IPv6: ADDRCONF(NETDEV_CHANGE): br-guest: link becomes ready
[ 49.688348] br-lan: port 1(eth1) entered forwarding state
[ 50.978476] br-guest: port 1(eth1.3) entered forwarding state
[ 51.223270] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 51.223438] br-lan: port 2(wlan1) entered forwarding state
[ 51.228871] br-lan: port 2(wlan1) entered forwarding state
[ 51.238612] device wlan1-1 entered promiscuous mode
[ 51.243997] IPv6: ADDRCONF(NETDEV_UP): wlan1-1: link is not ready
[ 51.244248] br-guest: port 2(wlan1-1) entered forwarding state
[ 51.250609] br-guest: port 2(wlan1-1) entered forwarding state
[ 51.353764] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
[ 53.228346] br-lan: port 2(wlan1) entered forwarding state
[ 53.248366] br-guest: port 2(wlan1-1) entered forwarding state
[ 65.057310] device wlan0 left promiscuous mode
[ 65.057569] br-lan: port 3(wlan0) entered disabled state
[ 66.515121] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 66.581804] device wlan0 entered promiscuous mode
root@mulambo:~#
Possible issues.
- The 5Ghz is a little bit slow than 2.4Ghz. Exist some options to boost the performance/range?
- Some warnings during the wireless driver load.
- Can't detect the internal sensors (i2c issue?)?
The sensors output is
root@mulambo:~# sensors
tsens_tz_sensor0-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor1-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor2-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor3-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor4-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor5-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor6-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor7-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor8-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor9-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
tsens_tz_sensor10-virtual-0
Adapter: Virtual device
temp1: +0.1°C (crit = +0.1°C)
root@mulambo:~#