# Installing LEDE on EA3500

**URL:** <https://forum.openwrt.org/t/installing-lede-on-ea3500/4460>\
**Category:** Installing and Using OpenWrt\
**Created:** [June 19, 2017, 1:47am UTC](https://forum.openwrt.org/t/installing-lede-on-ea3500/4460 "2017-06-19T01:47:13Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![DjiPi](https://forum.openwrt.org/user_avatar/forum.openwrt.org/djipi/32/12941_2.png) [@DjiPi](https://forum.openwrt.org/u/DjiPi)\
**Post date:** [June 20, 2017, 3:45am UTC](https://forum.openwrt.org/t/installing-lede-on-ea3500/4460/12 "2017-06-20T03:45:19Z")

</div>

Ok, here's my attempt at a step-by-step:

Preliminary step: router WAN port connected to your modem and LAN port connected to your computer.

1. Under Windows, [download and install Putty](http://www.putty.org/) or your favourite ssh emulator.
2. From the stock firmware, flash OpenWrt using this snapshot build: [https://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/openwrt-kirkwood-linksys-audi-squashfs-factory.bin](https://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/openwrt-kirkwood-linksys-audi-squashfs-factory.bin)
3. Using Putty or your favourite, connect to your router using host name 192.168.1.1, port 22, Connection type SSH  
a. Login as user `root`, no password
4. Type the command `opkg update`  
a. There should not be errors like "failure to download" - usually means that your Internet is down
5. Type the command `opkg install luci-ssl`
6. Type the command `reboot`  
a. Wait for the router to come back online (you can ping 192.168.1.1 from your connected PC to know when it will be available)
7. Using your browser, connect to "[https://192.168.1.1](https://192.168.1.1)". Add an exception for the warning about the certificate.
8. Go to the upgrade firmware menu and now use this firmware: [https://downloads.lede-project.org/releases/17.01.2/targets/kirkwood/generic/lede-17.01.2-kirkwood-linksys-audi-squashfs-sysupgrade.tar](https://downloads.lede-project.org/releases/17.01.2/targets/kirkwood/generic/lede-17.01.2-kirkwood-linksys-audi-squashfs-sysupgrade.tar)  
a. Do not retain settings
9. Now, you should be on LEDE finally
10. Assign a strong password to the root user
11. Set Dropbear listening interface on the LAN side only

If OpenWrt ==\> LEDE still doesn't work with Luci, you can try from the CLI using putty also; using the following commands would do a sysupgrade:

> cd /tmp  
> wget [https://downloads.lede-project.org/releases/17.01.2/targets/kirkwood/generic/lede-17.01.2-kirkwood-linksys-audi-squashfs-sysupgrade.tar](https://downloads.lede-project.org/releases/17.01.2/targets/kirkwood/generic/lede-17.01.2-kirkwood-linksys-audi-squashfs-sysupgrade.tar)  
> sysupgrade -n -v lede-17.01.2-kirkwood-linksys-audi-squashfs-sysupgrade.tar

---

_[View the full topic](https://forum.openwrt.org/t/installing-lede-on-ea3500/4460)._
