Install in EdgeRouter Lite

Installing and Using OpenWrt
1

Hi, i am installing openwrt in EdgeRouter Lite. I used the instruction of install https://openwrt.org/toh/ubiquiti/edgerouter.lite . but this is not working. The USB memory has 2 partitions:

Dispositivo Inicio Comienzo   Final Sectores Tamaño Id Tipo
/dev/sdd1              2048  329727   327680   160M  c W95 FAT32 (LBA)
/dev/sdd2            329728 4030463  3700736   1,8G 83 Linux

via serial port, the device shows this:

U-Boot 1.1.1 (UBNT Build Version: e102_003_eace7) (May 27 2019 - 06:35:40)

BIST check passed.
UBNT_E100 r1:2, r2:14, f:4/71, serial #: DC9FDB2889D9
MPR 13-00000-00
Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM:  512 MB
Clearing DRAM....... done
ERROR: Unable to allocate linux reserved memory (addr: 0x100000, size: 0x8000000).
Flash:  4 MB
Net:   octeth0, octeth1, octeth2

USB:   (port 0) scanning bus for devices... 1 USB Devices found
       scanning bus for storage devices...
  Device 0: Vendor: Kingston Prod.: DataTravelerMini Rev: PMAP
            Type: Removable Hard Disk
            Capacity: 1968.0 MB = 1.9 GB (4030464 x 512)
leds_init 206
 0 
reading vmlinux.64
..................................

6947088 bytes read
reading vmlinux.64.md5
argv[2]: coremask=0x3
argv[3]: root=/dev/sda2
argv[4]: rootdelay=15
argv[5]: rw
argv[6]: rootsqimg=squashfs.img
argv[7]: rootsqwdir=w
argv[8]: mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)
ELF file is 64 bit
Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x17ea220
Allocated memory for ELF segment: addr: 0xffffffff81100000, size 0x17ea220
Processing PHDR 0
  Loading 69eb30 bytes at ffffffff81100000
  Clearing 114b6f0 bytes at ffffffff8179eb30
## Loading Linux kernel with entry point: 0xffffffff81630620 ...
Bootloader: Done loading app on coremask: 0x3
[    0.000000] Linux version 4.14.209 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11257-5090152ae3)) #0 SMP Su0
[    0.000000] CVMSEG size: 2 cache lines (256 bytes)
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d0601 (Cavium Octeon+)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 000000000d400000 @ 0000000002900000 (usable)
[    0.000000]  memory: 000000000fc00000 @ 0000000410000000 (usable)
[    0.000000]  memory: 00000000017ea220 @ 0000000001100000 (usable)
[    0.000000] Wasting 243712 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using internal Device Tree.

Looking for valid bootloader image....
Jumping to start of image at address 0xbfc80000


U-Boot 1.1.1 (UBNT Build Version: e102_003_eace7) (May 27 2019 - 06:35:40)

BIST check passed.
UBNT_E100 r1:2, r2:14, f:4/71, serial #: DC9FDB2889D9
MPR 13-00000-00
Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM:  512 MB
Clearing DRAM....... done
ERROR: Unable to allocate linux reserved memory (addr: 0x100000, size: 0x8000000).
Flash:  4 MB
Net:   octeth0, octeth1, octeth2

USB:   (port 0) scanning bus for devices... 1 USB Devices found
       scanning bus for storage devices...
  Device 0: Vendor: Kingston Prod.: DataTravelerMini Rev: PMAP
            Type: Removable Hard Disk
            Capacity: 1968.0 MB = 1.9 GB (4030464 x 512)
leds_init 206
 0 
reading vmlinux.64
..................................

6947088 bytes read
reading vmlinux.64.md5
argv[2]: coremask=0x3
argv[3]: root=/dev/sda2
argv[4]: rootdelay=15
argv[5]: rw
argv[6]: rootsqimg=squashfs.img
argv[7]: rootsqwdir=w
argv[8]: mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)
ELF file is 64 bit
Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x17ea220
Allocated memory for ELF segment: addr: 0xffffffff81100000, size 0x17ea220
Processing PHDR 0
  Loading 69eb30 bytes at ffffffff81100000
  Clearing 114b6f0 bytes at ffffffff8179eb30
## Loading Linux kernel with entry point: 0xffffffff81630620 ...
Bootloader: Done loading app on coremask: 0x3
[    0.000000] Linux version 4.14.209 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11257-5090152ae3)) #0 SMP Su0
[    0.000000] CVMSEG size: 2 cache lines (256 bytes)
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d0601 (Cavium Octeon+)
[    0.000000] Checking for the multiply/shift bug... no.
[    0.000000] Checking for the daddiu bug... no.
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 000000000d400000 @ 0000000002900000 (usable)
[    0.000000]  memory: 000000000fc00000 @ 0000000410000000 (usable)
[    0.000000]  memory: 00000000017ea220 @ 0000000001100000 (usable)
2

that's exactly what the doc says too, and tells you what to do with it.

3

I just set up an EdgeRouter Lite like a week ago following the instructions in the wiki. I can confirm they're correct and give you a functional EdgeRouter Lite running OpenWrt...

1 Like