I uploaded r3g image on r3p by mistake

Installing and Using OpenWrt
1

hinh1
hinh11152×648 109 KB

After pressing the above button, add the file
breed-mt7621-xiaomi-r3g.bin
My router hasn't set up the IP and the light is on
I hope I can get some help

2

ULed where?

3

lights on the router

4

image
It doesn't light up, I've tried everything

5
  1. Use English.
  2. What are we looking at ? A black hole ? HAL ?
6

It doesn't light up, I've tried everything

7

As to the OpenWRT wiki, the R3P and the R3G are differnt devices.

https://openwrt.org/toh/xiaomi/mir3g
https://openwrt.org/toh/xiaomi/mi_router_3_pro

You used the R3G file, which appears to be a white device.
Your picture shows a silver device, which would be the R3P.

I assume the "failsafe" instruction doesn't help if you didn't do any manual configuration but simply flashed the wrong image file.

You might refer to the "Debricking" section in the wiki of the very device you have.

Does that "everything" you already tried include the debricking procuedure?

8

Can you give me the link please

9

Use the ones I already gave you here:

I literally just googled for the two different model names you mentioned, looked at the corresponding OpnWRT wiki pages, and pointed you to what I found.

So please read up on both of the links I already gave you, pick the one correct one for your device and if you think I'm right by assuming you used the wrong image, perform the procedure described there.