Hello
I have router Tp-link archer c20 v6, I wanna install openWRT on it but i did not find v6, please what i can do ?
Thank you all
No information means exactly that, it's unsupported at this point and unknown if it could be supported at all. Someone (you?) could collect the hardware information about it and start with the porting/ development for it, but before that is completed, you can't install OpenWrt on it at all.
what information we need and how? I will collect information about it, I am developer
It starts by opening the case and comparing it to (pictures of) its supported predecessor, followed by connecting and logging the serial console - by itself this won't do anything, but it should give a hint if the device is a) supportable at all (or if the vendor changed hardware) and b) if it's somewhat similar to its predecessor, if it appears to be, porting might be easier.
The real development works starts afterwards, it's going to be steep learning curve, but not impossible.
1 Like
1 Like
So its very important which C20 version. They differ.
not the point I was trying to make with the link, but yes.
The router in link is archer c20w v6 , but mine is archer c20 v6
The router in link is with four antenna while my router with three antenna