I might be an idiot but I've managed to get a dumb AP to work only on IPV6

Installing and Using OpenWrt
1

I have a WAX202. Clients get DHCP leases from the main router, a pfsense firewall. I can ping google's IPV6 DNS from clients, and I can ping openwrt.org via IPV6. I can't do the same on IPV4. If I plug the cable connecting the AP to the main switch into my laptop, it can be used fine. I want to fix this. I have no idea how I achieved this insanity, normally IPv6 is what is broken.

Router is running OpenWrt 22.03.0 r19685-512e76967f / LuCI openwrt-22.03 branch git-22.245.77528-487e58a

2

If you've configured the dumb ap correctly, it would have zero influence on the traffic flowing through it.

Which means, it not the device to blame :slight_smile:

3

I'm aware it's a config issue. The question is just how. I have another AP that's working fine, I followed the guide, but I'm also currently recovering from surgery so I probably made some dumb mistakes.

4

Now this is weird. Somehow PFsense is throwing a problem with just this AP.