i have ZyXEL NBG6716 and want to use the ath79 current version 21
my flash size is
[ 0.923740] m25p80 spi0.0: found mx25l3205d, expected m25p80
[ 0.930023] m25p80 spi0.0: mx25l3205d (4096 Kbytes)
[ 0.971735] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 0.978219] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 0.982725] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
i look at below
ath79: add support for ZyXEL NBG6716
but it does not say what to do after i unlock the zloader into uboot
and the sysupgrade 4m is confusing too
any hints? thx
model generic install instruction https://openwrt.org/toh/zyxel/nbg6716
since the instruction doesn't appear to cover 21.02, install the 19, and upgrade.
i am using 19, but thats from the ar71xx (support 19 only), now its using ath79 (support 21 only) and the flash layout is changed between them
- ar71xx = no future support after 19.07.x; no ar71xx images will be built with the next stable release (20.x)
- ath79 = future support will be available even after 19.07.x
i cant reply/bump to that because its closed. but the user there didnt update, whereas i want to update
Does this help?
Zyxel NBG6716 Update to 21.02.0-rc4
is it possible to update some wiki here as to if 4mb spi flash with 128mb nand is support for v21 lede?