Hi all.
I'm playing with a dismissed Huawei router, The (VDSL) AR169 model.
Specifications are not fully published: it is said to feature a dual core processor, 512 MB RAM and 512 MB flash, ad it is rated to manage 150Mbps WAN traffic. There are 4 Gbe ports and a serial console (RJ45).
Very few Huawei router are supported by Openwrt, what about this?
Here's the boot log from serial console:
Hi-Boot 2014.11 ( 2015-05-11 - 21:18:57 )
pcb_ver 0x3!board_id 0x102!
debug_serial 0!serial_baud 9600
Initializing GPIO:OK
Initializing I2C Bus:OK
Initializing TIMER:OK
Initializing PCA9555:OK
Initializing LED:OK
LoadFailTimes :0x1
Boot from KERNEL1... Loading Kernel Image ... OK
## Transferring control to Linux (at address 82008000) ...
Starting kernel ...
sh: ro: unknown operand
_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ _/ / / \_/ \_ ______
___________\___\__________________
Loading HSAN modules
==========================================
attribute(00)-alias(srvname ) = qos
attribute(01)-alias(start ) = 00000180
attribute(02)-alias(stop ) = 000001ff
==========================================
==========================================
attribute(00)-alias(srvname ) = normal
attribute(01)-alias(start ) = 00000000
attribute(02)-alias(stop ) = 0000017f
==========================================
HSAN init chip successfully ...!
==========================================
attribute(00)-alias(fatherifname ) = eth0
attribute(01)-alias(ifname ) = eth0.2
attribute(02)-alias(porttype ) = 00000001
attribute(03)-alias(phyport ) = 00000009
attribute(04)-alias(allocwanid ) = 00000001
==========================================
==========================================
attribute(00)-alias(product ) = 00000000
==========================================
==========================================
attribute(00)-alias(phy_addr ) = 00000001
attribute(01)-alias(reg_addr ) = 00003180
attribute(02)-alias(data ) = 0001
attribute(03)-alias(resv ) = 0000
==========================================
==========================================
attribute(00)-alias(enable ) = 00000001
==========================================
==========================================
==========================================
bootloader creation Data : May 12 2015, 14:59:14
Press Ctrl+B to break auto startup ... 0
Boot from CurrentPart=0,CurDiskFlag :0
Now boot from flash:/AR160-V200R006C10SPC300.cc, please wait...
Get Boot ...
Get kernel ...
Get rootfs ... update system file ok!
excutive app_squashfs
[ 33.839272] No Userspace process joined yet
[ 34.272755] record_reason module inittrace in line 340 hi device init
ar169_0x00000102.sh
5610 end
Create monitor process
FLASH_CreateFlashFile /mnt/misc/flashfile
INFO:Get pri len, the result is 0x810401abCreate cap process
Create vrp process
Bsp so creation Data : Jun 11 2015, 17:32:54
Bsp So Main
FLASH_CreateFlashFile /mnt/misc/flashfile
Bsp uio init start
Initializing I2C Bus:OK
Set Default time FAIL
Initializing SMI Bus:OK
==========================================
attribute(00)-alias(addr ) = 14900198
attribute(01)-alias(len ) = 00000004
attribute(02)-alias(data ) = 00000601
==========================================
Vspm340 So Create Date : Jun 1 2015, 21:48:32
Register vspm340_dsl Success
Drv0: Name: "vport", Opt at: 0x40098878Drv1: Name: "vspm340_dsl", Opt at: 0x40b8
DOPRA initialize..................OK
IAS initialize....................OK
VRP initialize
rmmod triductor.ko
insmod triductor.ko
[ 57.944400] No Userspace process joined yet
ApiInit ulPhyPort = 14, ulModPort = 0x0001000e, u32NotifyId = 0
image_patch:/mnt/patch1/lpu_bin/imageinfo.bin
Request OK
s:0x60040800[0x4c782800],e:0x602cb398
Echo Request Ok
Disable Port Ok
Set Mode Ok
Drv0: Name: "vport", Opt at: 0x40018878Drv1: Name: "pie", Opt at: 0x400841a8
VRP_SockTm_Init create............OK
==========================================
attribute(00)-alias(addr ) = 11080004
attribute(01)-alias(len ) = 00000004
attribute(02)-alias(data ) = 0000073c
==========================================
==========================================
attribute(00)-alias(addr ) = 11080008
attribute(01)-alias(len ) = 00000004
attribute(02)-alias(data ) = 00000011
==========================================
==========================================
attribute(00)-alias(addr ) = 11080010
attribute(01)-alias(len ) = 00000004
attribute(02)-alias(data ) = 00790011
==========================================
PIE_DrvInit begin
PIE Init OKFind driver fail. szPhyPortType: null
Create tasks..................K
Initialize tasks..................OK
Recovering configuration..........OK
Press any key to get started
===============display version===============
>
> Huawei Versatile Routing Platform Software
> VRP (R) software, Version 5.160 (AR160 V200R006C10SPC300)
> Copyright (C) 2011-2015 HUAWEI TECH CO., LTD
> Huawei AR169 Router uptime is 0 week, 0 day, 3 hours, 40 minutes
>
> MPU 0(Master) : uptime is 0 week, 0 day, 3 hours, 40 minutes
> SDRAM Memory Size : 512 M bytes
> Flash 0 Memory Size : 512 M bytes
> MPU version information :
> 1. PCB Version : AR169 VER.D
> 2. MAB Version : 0
> 3. Board Type : AR169
> 4. BootROM Version : 1
> MainBoard:
> Startup system software: flash:/AR160-V200R006C10SPC300.cc
> Next startup system software: flash:/AR160-V200R006C10SPC300.cc
> Backup system software for next startup: null
> Startup saved-configuration file: null
> Next startup saved-configuration file: null
> Startup license file: null
> Next startup license file: null
> Startup patch package: flash:/AR160A-V200R006C10CP1330T.pat
> Next startup patch package: flash:/AR160A-V200R006C10CP1330T.pat
> Startup voice-files: null
> Next startup voice-files: null