Huawei EchoLife EG8247Q necesito firmware o superadmin

For Developers
1

Huawei EchoLife EG8247Q: I need official firmware or authorized admin-level access information

I have a Huawei EchoLife EG8247Q that was previously used by Mundo / Mundo Pacífico Chile. I want to legally reuse it only as a WiFi access point and LAN switch behind an Amplimax/ELSYS device.

Confirmed setup:

  • Main router/device: Amplimax/ELSYS.
  • Main gateway: 192.168.10.254.
  • The cable from the Amplimax goes into LAN1 of the Huawei.
  • A PC connected to LAN2 of the Huawei receives 192.168.10.100 and can browse the internet.
  • Huawei LAN IP: 192.168.10.253.
  • Huawei DHCP server: disabled.
  • The Huawei WiFi networks are visible, but phones either get no internet access or do not receive a valid IP address.
  • In the Epuser account, WAN Configuration appears empty and there is no New/Add button.
  • I do not see Bridge WAN, WLAN Binding, SSID Binding, Port Binding, or AP Isolation.

Question:
Is there any official, documented, and safe way to use the Huawei EG8247Q as a pure WiFi access point, bridging LAN1-LAN4 with the 2.4GHz and 5GHz WiFi SSIDs, without using unauthorized credentials, leaked firmware, PPPoE, random VLAN values, or touching the PON/fiber interface?

I need to know:

  1. Whether the EG8247Q allows this with ISP firmware.
  2. Whether Bridge WAN / WLAN Binding is required.
  3. Whether there is any public official generic firmware for the EG8247Q.
  4. Whether there is a safe backup and recovery method.
  5. Or whether the correct solution is to stop trying and use a neutral router/access point instead.
2

The preferred language in the OpenWrt forum is english.
When writing in your native language, please always provide an english translation.
This way other users all around the world can take part in the discussion and possibly benefit from the outcome, without having to use a translator.

Thanks! :slight_smile: